Publications of Joachim Mayer

Cojocaru-Mirédin, O.; Bürger, J.-C.; Polin, N.; Meledin, A.; Mayer, J.; Wuttig, M.; Daus, A.: Thermally Assisted Atomic-Scale Intermixing and Ordering in GeTe–Sb₂Te₃ Superlattices. ACS Nano (2025)

Felten, M.; Chaineux, V.; Zhang, S.; Tehranchi, A.; Hickel, T.; Scheu, C.; Spille, J.; Lipińska-Chwałek, M.; Mayer, J.; Berkels, B. et al.; Hans, M.; Greving, I.; Flenner, S.; Sefa, S.; Zander, D.: The effect of Laves phases and nano-precipitates on the electrochemical corrosion resistance of Mg–Al–Ca alloys under alkaline conditions. Journal of Magnesium and Alloys 12 (6), pp. 2447 - 2461 (2024)

Zubair, M.; Felten, M.; Hallstedt, B.; Vega-Paredes, M.; Abdellaoui, L.; Bueno Villoro, R.; Lipinska-Chwalek, M.; Ayeb, N.; Springer, H.; Mayer, J. et al.; Berkels, B.; Zander, D.; Korte-Kerzel, S.; Scheu, C.; Zhang, S.: Laves phases in Mg–Al–Ca alloys and their effect on mechanical properties. Materials and Design 225, 111470 (2023)

Li, J.; Zhou, X.; Breen, A. J.; Peng, Z.; Su, J.; Kürnsteiner, P.; Duarte, M. J.; Duarte Correa, M. J.; Lipińska-Chwałek, M.; Wang, H. et al.; Holec, D.; Mayer, J.; Dehm, G.: Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg–Al–Ca–Mn alloys. Journal of Alloys and Compounds 928, 167177 (2022)

Varanasi, R. S.; Lipińska-Chwałek, M.; Mayer, J.; Gault, B.; Ponge, D.: Mechanisms of austenite growth during intercritical annealing in medium manganese steels. Scripta Materialia 206, 114228 (2022)

Kochmann, J.; Wulfinghoff, S.; Ehle, L.; Mayer, J.; Svendsen, B.: Efficient and accurate two-scale FE-FFT-based prediction of the effective material behavior of elasto-viscoplastic polycrystals. Computational Mechanics 61, pp. 751 - 764 (2018)

Liebscher, C.; Yao, M.; Dey, P.; Lipińska-Chwalek, M.; Lipińska-Chwalek, M.; Berkels, B.; Gault, B.; Hickel, T.; Herbig, M.; Mayer, J. et al.; Neugebauer, J.; Raabe, D.; Dehm, G.; Scheu, C.: Tetragonal fcc-Fe induced by κ-carbide precipitates: Atomic scale insights from correlative electron microscopy, atom probe tomography, and density functional theory. Physical Review Materials 2, 023804, pp. 1 - 6 (2018)

Raabe, D.; Roters, F.; Neugebauer, J.; Gutiérrez-Urrutia, I.; Hickel, T.; Bleck, W.; Schneider, J. M.; Wittig, J. E.; Mayer, J.: Ab initio-guided design of twinning-induced plasticity steels. MRS Bulletin 41 (4), pp. 320 - 325 (2016)

Dehm, G.; Thomas, J.; Mayer, J.; Weißgärber, T.; Püsche, W.; Sauer, C.: Formation and Interface Structure of TiC Particles in Dispersion Strengthened Cu Alloys. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties 77 (6), pp. 1531 - 1554 (1998)

Sauer, C.; Weißgärber, T.; Dehm, G.; Mayer, J.; Püsche, W.; Kieback, B. F.: Dispersion Strengthening of Copper Alloys. Zeitschrift für Metallkunde 89 (2), pp. 119 - 125 (1998)

Sauer, C.; Weißgärber, T.; Püsche, W.; Dehm, G.; Mayer, J.; Kieback, B. F.: High Temperature Creep of Microcrystalline Dispersion Strengthened Copper Alloys. International Journal of Powder Metallurgy 33 (1), pp. 45 - 53 (1997)

Dehm, G.; Ernst, F.; Mayer, J.; Möbus, G.; Müllejans, H.; Phillipp, F.; Scheu, C.; Rühle, M.: Transmission Electron Microscopy at the Max-Planck-Institut für Metallforschung. Zeitschrift für Metallkunde 87 (11), pp. 898 - 910 (1996)

Kochmann, J.; Ehle, L.; Wulfinghoff, S.; Mayer, J.; Svendsen, B.; Reese, S.: Efficient multiscale FE-FFT-based modeling and simulation of macroscopic deformation processes with non-linear heterogeneous microstructures. In: Lecture Notes in Applied and Computational Mechanics, Vol. 86, pp. 129 - 146 (Eds. Wriggers, P.; Allix, O.; Soric, J.). International Workshop on Multiscale Modeling of Heterogeneous Structures, MUMO 2016, Dubrovnik, Croatia, September 21, 2016 - September 23, 2016. Springer Verlag (2018)

Weißgärber, T.; Sauer, C.; Dehm, G.; Mayer, J.; Kieback, B. F.: Dispersionsbildung und -verfestigung in mechanisch legierten Kupferlegierungen. In: DGM Symposium 1996, pp. 69 - 74. DGM Symposium 1996, Hamburg, Germany, September 18, 1996 - September 20, 1996. DGM Informationsgesellschaft, Frankfurt, Germany (1997)

Weißgärber, T.; Sauer, C.; Püsche, W.; Kieback, B. F.; Dehm, G.; Mayer, J.: Effect of Process Parameters on the Microstructure and Properties of TiC Dispersion Strengthened Copper Alloys. In: Advances in Powder Metallurgy and Particulate Materials - 1997, pp. 1123 - 1134. International Conference on Powder Metallurgy and Particulate Materials 1997, Chicago, IL, USA, June 29, 1997 - July 02, 1997. Metal Powder Industries Federation; APMI International, Princeton NJ (1997)

Sauer, C.; Weißgärber, T.; Püsche, W.; Dehm, G.; Mayer, J.; Kieback, B. F.: High Temperature Creep of Microcrystalline Dispersion Strengthened Copper Alloys. In: Advances in Powder Metallurgy and Particulate Materials - 1996: Proceedings of the 1996 World Congress on Powder Metallurgy & Particulate Materials Sponsored by the Metal Powder Industries Federation and APMI International, Vol. 4, pp. 14-81 - 14-94 (Eds. Cadle, T.; Narasimhan, K. S.). 1996 International Conference on Powder Metallurgy and Particulate Materials, Washington, DC, USA, June 16, 1996 - June 21, 1996. Princeton, NJ; Metal Powder Industries Federation; APMI International, New York, NY, USA (1996)

Liebscher, C.; Lipinski-Chwalek, M.; Yao, M.; Herbig, M.; Gault, B.; Mayer, J.; Raabe, D.; Scheu, C.: New insights in the atomic interface structure of kappa carbides in high-Mn steels. TMS2017, San Diego, CA, USA (2017)

Ahmad, S.: Fundamental investigation of the atomic structures of [111] tilt grain boundaries, their defects and segregation behaviour in pure and alloyed Al. Dissertation, Ruhr-Universität Bochum (2023)

Mayweg, D.: Microstructural characterization of white etching cracks in 100Cr6 bearing steel with emphasis on the role of carbon. Dissertation, RWTH Aachen University (2021)

Qin, Y.: Microstructure alterations in bearing steels exposed to severe plastic deformation. Dissertation, RWTH Aachen University (2020)