Davut, K.; Zaefferer, S.: Phase fraction and texture quantification of Al-TRIP steel from EBSD data. 3rd Int. Conf. On Texture and Anisotropy of Polycrystals (ITAP-3), Göttingen, Germany (2009)
Elhami, N.-N.; Tjahjanto, D.; Zaefferer, S.: Microstructural and micromechanical assessment of damage nucleation in a low-alloyed TRIP Steel. 3rd International Conference on Texture and Anisotropy of Polycrystals ITAP-3, Göttingen, Germany (2009)
Steinmetz, D.; Zaefferer, S.: Challenges of low-accelerating voltage electron backscatter diffraction. 3rd International Conference on Texture and Anisotropy of Polycrystals (ITAP-3), Göttingen, Germany (2009)
Zaefferer, S.: 3D-orientation microscopy using FIB–EBSD tomography: An overview on techniques, applications and limits. 158th ISIJ Meeting, Kyoto, Japan (2009)
Zambaldi, C.; Roters, F.; Zaefferer, S.; Raabe, D.: Crystal plasticity modeling for property extraction and the microstructure properties relation of intermetallic -TiAl nased alloys. 1st International Conference on Material Modelling (ICMM 1), Dortmund, Germany (2009)
Gutierrez-Urrutia, I.; Zaefferer, S.; Raabe, D.: Effect of grain size and heterogeneous strain distribution on deformation twinning in a Fe–22Mn–0.6C TWIP steel. THERMEC 2009, Berlin, Germany (2009)
Calcagnotto, M.; Ponge, D.; Demir, E.; Raabe, D.; Zaefferer, S.: 3D-EBSD Investigation on Orientation Gradients and Geometrically Necessary Dislocations Induced by the Martensitic Phase Transformation in Ultrafine Grained Dual-Phase Steels. Interdisciplinary Symposium on 3D Microscopy, Interlaken, Switzerland (2009)
Khorashadizadeh, A.; Winning, M.; Zaefferer, S.; Raabe, D.: 3D tomographic EBSD characterization of crystal topology in a CuZr alloy processed by equal channel angular pressing. Interdisciplinary Symposium on 3D Microscopy, Interlaken, Switzerland (2009)
Zaefferer, S.: 3D orientation microscopy by EBSD-FIB tomography: What can be done, what can't? AGH - ZEISS Workshop on Focused Ion Beam techniques, Krakow, Poland (2009)
Davut, K.; Zaefferer, S.: Effect of step size and scanned area on phase fraction and texture quantification from EBSD data. DGM-DVM, EBSD-Workshop 2009, Mikrostrukturuntersuchungen im REM, Chemnitz, Germany (2009)
Zaefferer, S.: 3D-orientation microscopy using FIB–EBSD tomography: An overview on techniques, applications and limits. EMAS 2009, Gdańsk, Poland (2009)
Gutierrez-Urrutia, I.; Zaefferer, S.; Raabe, D.: Quantitative electron channelling contrast imaging: A promising tool for the study of dislocation structures in SEM. Electron Backscatter Diffraction Meeting, Swansea, UK (2009)
Steinmetz, D.; Zaefferer, S.: Towards ultrahigh resolution EBSD by use of low accelerating voltage. EBSD 2009 Meeting, University of Swansea, Wales, UK (2009)
Raabe, D.; Demir, E.; Zaefferer, S.: Experimental investigation of geometrically necessary dislocations beneath small indents of different depths using EBSD tomography. MRS 2009 Fall Meeting, Boston, MA, USA (2009)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Within this project we investigate chemical fluctuations at the nanometre scale in polycrystalline Cu(In,Ga)Se2 and CuInS2 thin-flims used as absorber material in solar cells.
This project aims to investigate the dynamic hardness of B2-iron aluminides at high strain rates using an in situ nanomechanical tester capable of indentation up to constant strain rates of up to 100000 s−1 and study the microstructure evolution across strain rate range.
The thorough, mechanism-based, quantitative understanding of dislocation-grain boundary interactions is a central aim of the Nano- and Micromechanics group of the MPIE [1-8]. For this purpose, we isolate a single defined grain boundary in micron-sized sample. Subsequently, we measure and compare the uniaxial compression properties with respect to…
Within this project, we will use a green laser beam source based selective melting to fabricate full dense copper architectures. The focus will be on identifying the process parameter-microstructure-mechanical property relationships in 3-dimensional copper lattice architectures, under both quasi-static and dynamic loading conditions.