Spiegel, M.: Corrosion protection and electronic conductivity: Spinel forming stainless steels as CCC for MCFC. Gordon Research Conference on High Temperature Corrosion, New London, NH, USA (2003)
Parezanovic, I.; Spiegel, M.: Surface modification of different Fe–Si and Fe–Mn alloys by oxidation/reduction treatments. Eurocorr 2003, Budapest, Hungary (2003)
Li, Y. S.; Spiegel, M.: Degradation performance of Al-containing alloys and intermetallics by molten ZnCl2/KCl. Corrosion Science in the 21th Century, UMIST Manchester, UK (2003)
Spiegel, M.: Factors affecting the high temperature corrosion resistance of coatings in waste fired plant. Corrosion Science in the 21th Century, UMIST Manchester, UK (2003)
Spiegel, M.; Parezanovic, I.; Strauch, E.; Grabke, H. J.: Spinel forming stainless steels as possible current collector materials for molten carbon ate fuel cells. Fuel Cells Science and Technology, Amsterdam, The Netherlands (2002)
Spiegel, M.; Warnecke, R.: Korrosion hochlegierter Stähle und nichtmetallischer Werkstoffe unter Müll verbrennungsbedingungen. VDI Fachtagung: ‚Korrosion in energieerzeugenden Anlagen’, Würzburg (2002)
Spiegel, M.; Zahs, A.; Grabke, H. J.: Fundamental aspects of chlorine induced corrosion in power plants. Invited lecture on the Workshop: ‘Life cycle issues in advanced energy systems’, Woburn, UK (2002)
Genchev, G.; Cox, K.; Sarfraz, A.; Bosch, C.; Spiegel, M.; Erbe, A.: Sour corrosion – Investigation of anodic iron sulfide layer growth in saturated H2S saline solutions. Gordon Research Conference-Aqueous Corrosion, New London, NH, USA (2014)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Within this project we investigate chemical fluctuations at the nanometre scale in polycrystalline Cu(In,Ga)Se2 and CuInS2 thin-flims used as absorber material in solar cells.
This project aims to investigate the dynamic hardness of B2-iron aluminides at high strain rates using an in situ nanomechanical tester capable of indentation up to constant strain rates of up to 100000 s−1 and study the microstructure evolution across strain rate range.
The thorough, mechanism-based, quantitative understanding of dislocation-grain boundary interactions is a central aim of the Nano- and Micromechanics group of the MPIE [1-8]. For this purpose, we isolate a single defined grain boundary in micron-sized sample. Subsequently, we measure and compare the uniaxial compression properties with respect to…
Within this project, we will use a green laser beam source based selective melting to fabricate full dense copper architectures. The focus will be on identifying the process parameter-microstructure-mechanical property relationships in 3-dimensional copper lattice architectures, under both quasi-static and dynamic loading conditions.