Spiegel, M.: Factors affecting the high temperature corrosion resistance of coatings in waste fired plant. In: Corrosion Science in the 21th Century, 1. UMIST, Manchester, UK (2003)
Spiegel, M.; Zahs, A.; Grabke, H. J.: The role of alloying elements on the corrosion in oxidizing and chloridizing gases. In: Corrosion 2001, pp. 1 - 10. Corrosion 2001, Houston, Texas, USA, 2001. (2002)
Parezanović, I.; Spiegel, M.; Strauch, E.; Grabke, H.-J.: High alloyed stainless steels containing Co, Mn, Mo, Ni, Si as possible cathode current collectors in MCFC. In: Proceedings of International Congress on Advanced Materials, pp. 1 - 8. Materials Week 2001, International Congress on Advanced Materials, München, Germany, October 01, 2001 - October 04, 2001. (2001)
Spiegel, M.; Grabke, H.-J.: Corrosion mechanisms of steels by salt melts from waste incineration plants. In: Molten Salt Forum Ser.. Molten Salt Chemistry and Technology 5, Dresden, Germany, 1997-08. Trans Tech Publications Ltd (1998)
Schmitt, M.; Spiegel, M.: High Temperature Corrosion: Corrosion process of stainless steels and nickel base alloys under BtE and WtE conditions. International Conference on Waste and Biomass Combustion, Michelangelo Hotel Milano, Italy (2008)
Schmitt, M.; Spiegel, M.: Interim report on corrosion data: Dependence on variation of chemical environment. NextGenBioWaste, 2nd Progress Meeting 2008, Schiphol Airport Amsterdam, The Netherlands (2008)
Swaminathan, S.; Spiegel, M.; Rohwerder, M.: Investigations on external/internal oxidation of quarternary model alloy during annealing in N2/H2: Role of dew point and dwelling time. 7th International Conference on the Microscopy of Oxidation, Chester, UK (2008)
Schmitt, M.; Spiegel, M.: Contribution to the analysis of the corrosion process of metallic materials in incineration plants. EUROCORR 2008, EICC Edinburgh, UK (2008)
Swaminathan, S.; Spiegel, M.; Rohwerder, M.: Effect of annealing conditions on the selective oxidation of quarternary model alloy. 4th International Conference on Diffusion in Solids and Liquids, Barcelona, Spain (2008)
Schmitt, M.; Spiegel, M.: High Temperature Corrosion: Corrosion mechanism of candidate materials in lab-scale incineration environments. General Assembly NextGenBioWaste 2008, De Zwijger Amsterdam, The Netherlands (2008)
Schmitt, M.; Spiegel, M.: Corrosion and fouling data of candidate materials for WtE components: Part II. NextGenBioWaste, 1st Progress Meeting 2008, Schiphol Airport Amsterdam, The Netherlands (2008)
Swaminathan, S.; Koll, T.; Pohl, M.; Spiegel, M.: Hot-dip galvanizing simulation of model alloys and industrial steel grades: Correlation between surface chemistry and wettability. GALVATECH `07, 7th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan (2007)
Brito, P.; Pinto, H.; Pyzalla, A. R.; Spiegel, M.: Phase composition and internal stress development during the oxidation of iron aluminides. Final Conference COST Action 535 Thermodynamics of Alloyed Aluminides (THALU) and 4th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Interlaken, Switzerland (2007)
Schmitt, M.; Spiegel, M.: Corrosion and fouling data of candidate materials for WtE components: Part I. NextGenBioWaste, 2nd Progress Meeting 2007, Schiphol Airport Amsterdam, The Netherlands (2007)
Swaminathan, S.; Spiegel, M.: Effect of alloy composition on the selective oxidation of ternary Fe–Si–Cr, Fe–Mn–Cr model alloys. ECASIA 2007, 12th European Conference on Applications of Surface and Interface Analysis, Brussels-Flggey, Belgium (2007)
Schmitt, M.; Spiegel, M.: Introduction to the Working Group NGBW. NextGenBioWaste, 1st Progress Meeting 2007, Schiphol Airport Amsterdam, The Netherlands (2007)
Hydrogen in aluminium can cause embrittlement and critical failure. However, the behaviour of hydrogen in aluminium was not yet understood. Scientists at the Max-Planck-Institut für Eisenforschung were able to locate hydrogen inside aluminium’s microstructure and designed strategies to trap the hydrogen atoms inside the microstructure. This can…
Oxidation and corrosion of noble metals is a fundamental problem of crucial importance in the advancement of the long-term renewable energy concept strategy. In our group we use state-of-the-art electrochemical scanning flow cell (SFC) coupled with inductively coupled plasma mass spectrometer (ICP-MS) setup to address the problem.
In this project we investigate the hydrogen distribution and desorption behavior in an electrochemically hydrogen-charged binary Ni-Nb model alloy. The aim is to study the role of the delta phase in hydrogen embrittlement of the Ni-base alloy 718.
We plan to investigate the rate-dependent tensile properties of 2D materials such as metal thin films and PbMoO4 (PMO) films by using a combination of a novel plan-view FIB based sample lift out method and a MEMS based in situ tensile testing platform inside a TEM.
This project aims to investigate the influence of grain boundaries on mechanical behavior at ultra-high strain rates and low temperatures. For this micropillar compressions on copper bi-crystals containing different grain boundaries will be performed.
Hydrogen induced embrittlement of metals is one of the long standing unresolved problems in Materials Science. A hierarchical multiscale approach is used to investigate the underlying atomistic mechanisms.
For understanding the underlying hydrogen embrittlement mechanism in transformation-induced plasticity steels, the process of damage evolution in a model austenite/martensite dual-phase microstructure following hydrogenation was investigated through multi-scale electron channelling contrast imaging and in situ optical microscopy.
We will investigate the electrothermomechanical response of individual metallic nanowires as a function of microstructural interfaces from the growth processes. This will be accomplished using in situ SEM 4-point probe-based electrical resistivity measurements and 2-point probe-based impedance measurements, as a function of mechanical strain and…
The project aims to study corrosion, a detrimental process with an enormous impact on global economy, by combining denstiy-functional theory calculations with thermodynamic concepts.