Dehm, G.; Müllner, P.: TEM-Observation of Dislocations in Polycrystalline Metal Films. In: The Encyclopedia of Materials: Science and Technology, Vol. 1, pp. 2329 - 2331 (Eds. Buschow, .H.J.; Cahn, R.; Flemings, M.; Ilschner, .; Kramer, E. et al.) (2001)
Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe (Materials Resaerch Symposium Proceedings, Phase Transformations and Systems Driven far from Equilibrium, 481). MRS Fall Meeting´97, Boston, MA, USA. (2001)
Bieler, S.; Kang, S. G.; Heußen, D.; Ramachandramoorthy, R.; Dehm, G.; Weinberg, K.: Investigation of copper lattice structures using a Split Hopkinson Pressure Bar. Proceedings of Applied Mathematics and Mechanics, Special Issue: 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) 21 (1), e202100155, (2021)
Rehman, U.; Tian, C.; Stein, F.; Best, J. P.; Dehm, G.: Fracture Toughness of the Intermetallic C15 Al2Ca Laves Phase Determined using a Micropillar Splitting Technique. In: Intermetallics 2021, pp. 155 - 156. Intermetallics 2021, Kloster Banz, Bad Staffelstein, Germany, October 04, 2021 - October 08, 2021. (2021)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Micromechanics of Co–Nb Laves Phases: Strength, Fracture Toughness, and Hadrness as Function of Composition and Crystal Structure. In: Joint EPRI – 123HIMAT International Conference on Advances in High-Temperature Materials, 2019, pp. 11 - 21 (Eds. Shingledecker, J.; Takeyama, M.). EPRI's 9th International Conf on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conf on High-Temperature Materials, Nagasaki, Japan, October 21, 2019 - October 24, 2019. (2019)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Deformation of Micropillars of Cubic and Hexagonal NbCo2 Laves Phases under Uniaxial Compression at Room Temperature. In: Proc. Intermetallics 2017, pp. 199 - 200 (Eds. Heilmaier, M.; Krüger, M.; Mayer, S.; Palm, M.; Stein, F.). Intermetallics 2017, Educational Center Kloster Banz, Bad Staffelstein, Germany, October 02, 2017 - October 06, 2017. Conventus Congressmanagement & Marketing GmbH, Jena, Germany (2017)
Hieke, S. W.; Willinger, M. G.; Wang, Z.-J.; Richter, G.; Dehm, G.; Scheu, C.: In situ electron microscopy – insights in solid state dewetting of epitaxial Al thin films on sapphire. In: Microscopy Conference 2017 (MC 2017) - Proceedings (Ed. Laue, M.). Microscopy Conference 2017 (MC 2017), Lausanne, Switzerland, August 21, 2017 - August 25, 2017. Universität Regensburg, Regensburg (2017)
Hieke, S. W.; Dehm, G.; Scheu, C.: Investigation of solid state dewetting phenomena of epitaxial Al thin films on sapphire using electron microscopy. In: European Microscopy Congress 2016: Proceedings, pp. 203 - 204. The 16th European Microscopy Congress (EMC 2016), Lyon, France, August 28, 2016 - September 02, 2016. Wiley-VCH Verlag GmbH & Co KGaA (2016)
Heinz, W.; Dehm, G.: Grain resolved orientation changes and texture evolution in a thermally strained Al film on Si substrate. The 38th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2011), San Diego, CA, USA, May 02, 2011 - May 06, 2011. Surface and Coatings Technology, Part of special issue: Proceedings of the 38th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), ICMCTF 2011 206 (7), pp. 1511 - 2034 (2011)
Motz, C.; Kiener, D.; Kirchlechner, C.; Grosinger, W.; Pippan, R.; Dehm, G.: Advances in in-situ testing in scanning electron microscopes: probing mechanical properties at the nano/micro-scale. In: 10th Multinational Congress on Microscopy (MCM 2011), pp. 57 - 58. 10th Multinational Congress on Microscopy (MCM 2011). (2011)
Cha, L.; Clemens, H. J.; Dehm, G.; Zhang, Z.: In-situ TEM heating study of the γ lamellae formation inside the α2 matrix of a Ti-45Al-7.5Nb alloy. 2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010;Code 83174, Shenzhen, China, November 06, 2010 - November 08, 2020. Advanced Materials Research 146-147, pp. 1365 - 1368 (2011)
Clemens, H. J.; Schmoelzer, T.; Schloffer, M.; Schwaighofer, E.; Mayer, S.; Dehm, G.: Physical metallurgy and properties of β-solidifying TiAl based alloys. In: Materials Research Society symposium proceedings, Vol. 1295, pp. 95 - 100. Materials Research Society Symposium N – Intermetallic-Based Alloys for Structural and Functional Applications , San Francisco, CA, USA, April 25, 2011 - April 29, 2011. Materials Research Society: MRS, Leoben, Austria (2011)
Dehm, G.; Kiener, D.: Obtaining a quantitative micro- and nano-mechanical understanding of metals using in situ electron microscopy. In: MCM 2011, pp. 599 - 600. 10th Multinational Congress on Microscopy (MCM 2011), Urbino, Italy, September 04, 2011 - September 09, 2011. Urbino, Italy (2011)
Dehm, G.; Raj, R.; Rühle, M.: Measurement of the Interfacial Shear Strength of Thin Copper Films on Sapphire by Microindentation Experiments. In: Materials Research Symposium Proceedings 1996 (Symposium I – Polycrystalline Thin Films: Structure, Texture, Properties and Applications II), Vol. 403, pp. 151 - 156. 1996 MRS Fall Meeting & Exhibit, Boston, MA, USA, December 02, 1996 - December 06, 1996. Materials Research Society, Boston, MA, USA (2011)
Huang, R.; Robl, W.; Dehm, G.; Ceric, H.; Detzel, T.: Disparate tendency of stress evolution of thin and thick electroplated Cu films at room temperature. In: Proceedings of the International Symposium on the Physical and Failure Analysis of Integrated Circuits, 5532222, pp. 1 - 6. International Symposium on the Physical and Failure Analysis of Integrated Circuits IPFA 2010, Singapore, Singapore, July 05, 2010 - July 09, 2010. IEEE (2010)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
The structure of grain boundaries (GBs) is dependent on the crystallographic structure of the material, orientation of the neighbouring grains, composition of material and temperature. The abovementioned conditions set a specific structure of the GB which dictates several properties of the materials, e.g. mechanical behaviour, diffusion, and…
The goal of this project is to develop an environmental chamber for mechanical testing setups, which will enable mechanical metrology of different microarchitectures such as micropillars and microlattices, as a function of temperature, humidity and gaseous environment.
Crystal plasticity modelling has gained considerable momentum in the past 20 years [1]. Developing this field from its original mean-field homogenization approach using viscoplastic constitutive hardening rules into an advanced multi-physics continuum field solution strategy requires a long-term initiative. The group “Theory and Simulation” of…
The computational materials design department in collaboration with the Technical University Darmstadt and the Ruhr University Bochum developed a workflow to calculate phase diagrams from ab-initio. This achievement is based on the expertise in the ab-initio thermodynamics in combination with the recent advancements in machine-learned interatomic…
The project focuses on development and design of workflows, which enable advanced processing and analyses of various data obtained from different field ion emission microscope techniques such as field ion microscope (FIM), atom probe tomography (APT), electronic FIM (e-FIM) and time of flight enabled FIM (tof-FIM).
This project will aim at addressing the specific knowledge gap of experimental data on the mechanical behavior of microscale samples at ultra-short-time scales by the development of testing platforms capable of conducting quantitative micromechanical testing under extreme strain rates upto 10000/s and beyond.