Sevlikar, S. V.; Muralikrishna, G. M.; Gaertner, D.; Starikov, S.; Brink, T.; Scheiber, D.; Smirnova, D.; Irmer, D.; Tas, B.; Esin, V. A.et al.; Razumovskiy, V. I.; Liebscher, C.; Wilde, G.; Divinski, S. V.: Grain boundary diffusion and segregation of Cr in Ni Σ11(1̄13)[110] bicrystals: Decoding the role of grain boundary defects. Acta Materialia 278, 120229 (2024)
Ahmad, S.; Brink, T.; Liebscher, C.; Dehm, G.: Influence of variation in grain boundary parameters on the evolution of atomic structure and properties of [111] tilt boundaries in aluminum. Acta Materialia 268, 119732 (2024)
Leitherer, A.; Yeo, B. C.; Liebscher, C.; Ghiringhelli, L. M.: Automatic identification of crystal structures and interfaces via artificial-intelligence-based electron microscopy. npj Computational Materials 9 (1), 179 (2023)
Harrison, P.; Zhou, X.; Das, S. M.; Lhuissier, P.; Liebscher, C.; Herbig, M.; Ludwig, W.; Rauch, E. F.: Reconstructing dual-phase nanometer scale grains within a pearlitic steel tip in 3D through 4D-scanning precession electron diffraction tomography and automated crystal orientation mapping. Ultramicroscopy 238, 113536 (2022)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Titanium and its alloys are widely used in critical applications due to their low density, high specific strength, and excellent corrosion resistance, but their poor plasticity at room temperature limits broader utilization. Introducing hydrogen as a temporary alloying element has been shown to improve plasticity during high-temperature processing…
This project targets to exploit or develop new methodologies to not only visualize the 3D morphology but also measure chemical distribution of as-synthesized nanostructures using atom probe tomography.
Project C3 of the SFB/TR103 investigates high-temperature dislocation-dislocation and dislocation-precipitate interactions in the gamma/gamma-prime microstructure of Ni-base superalloys.
Statistical significance in materials science is a challenge that has been trying to overcome by miniaturization. However, this process is still limited to 4-5 tests per parameter variance, i.e. Size, orientation, grain size, composition, etc. as the process of fabricating pillars and testing has to be done one by one. With this project, we aim to…