Prabhakar, J. M.; Ostendorf, A.: Fundamental investigation of the cathodic delamination behaviour of model polymer coating on novel chromium-based coatings electrodeposited from a trivalent chromium-formate electrolyte. Dissertation, Ruhr-Universität Bochum, Fakultät für Maschinenbau (2022)
Niu, F.: Investigation of interfacial water structure at Ge(100)/electrolyte interfaces by attenuated total reflection infrared spectroscopy. Dissertation, Ruhr University Bochum, Bochum, Germany (2018)
Chen, Y.-H.: A comprehensive in situ spectroscopic study of 2-mercaptobenzothiazole as a corrosion inhibitor for copper. Dissertation, Fakultät für Chemie und Biochemie der Ruhr-Universität Bochum, Bochum, Germany (2018)
Mondragon Ochoa, J. S.: Preparation of Polyacrylic Thin Films on Iron by Controlled Radical Polymerization and their Delamination Behaviour. Dissertation, Ruhr-Universität Bochum, Bochum, Germany (2018)
Toparli, C.: Passivity and passivity breakdown on copper: In situ and operando observation of surface oxides. Dissertation, Ruhr-Universität Bochum, Fakultät Maschinenbau, Bochum, Germany (2017)
Fernández Solis, C. D.: Application of biopolymer-organosiloxane hybrid films as protective barrier on metallic surfaces. Dissertation, Fakultät für Chemie und Biochemie der Ruhr-Universität Bochum, Bochum, Germany (2016)
Pengel, S.: Anwendung eines Quantenkaskadenlasers in der Zeitaufgelösten Laserabsorptionsspektroskopie zur kinetischen Untersuchung der elektrochemischen Sauerstoffreduktion an Germanium. Dissertation, Fakultät für Chemie und Biochemie, Ruhr-Universität Bochum, Bochum, Germany (2015)
Iqbal, D.: Ultrathin Chemisorbed Polymer Coatings: Corrosion Protection and Nanostructuring of ZnO. Dissertation, Faculty of Chemistry and Biochemistry, Ruhr University Bochum, Bochum, Germany (2014)
Rabe, M.; Kasian, O.; Mayrhofer, K. J. J.; Erbe, A.: Schlussbericht zum Vorhaben: Mechanistische Untersuchungen der elektrochemischen Sauerstoffentwicklung auf Modellelektroden - Stabilität der Elektroden, Natur der Oxide und Intermediate - Teilvorhaben des Clusterprojekts "Mangan". Technische Informationsbibliothek (TIB) Hannover, Hannover, Germany (2019), 32 pp.
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Hydrogen embrittlement (HE) is one of the most dangerous embrittlement problems in metallic materials and advanced high-strength steels (AHSS) are particularly prone to HE with the presence of only a few parts-per-million of H. However, the HE mechanisms in these materials remain elusive, especially for the lightweight steels where the composition…
With the support of DFG, in this project the interaction of H with mechanical, chemical and electrochemical properties in ferritic Fe-based alloys is investigated by the means of in-situ nanoindentation, which can characterize the mechanical behavior of independent features within a material upon the simultaneous charge of H.
The key to the design and construction of advanced materials with tailored mechanical properties is nano- and micro-scale plasticity. Significant influence also exists in shaping the mechanical behavior of materials on small length scales.
This project is part of Correlative atomic structural and compositional investigations on Co and CoNi-based superalloys as a part of SFB/Transregio 103 project “Superalloy Single Crystals”. This project deals with the identifying the local atomic diffusional mechanisms occurring during creep of new Co and Co/Ni based superalloys by correlative…
A wide range of steels is nowadays used in Additive Manufacturing (AM). The different matrix microstructure components and phases such as austenite, ferrite, and martensite as well as the various precipitation phases such as intermetallic precipitates and carbides generally equip steels with a huge variability in microstructure and properties.
Many important phenomena occurring in polycrystalline materials under large plastic strain, like microstructure, deformation localization and in-grain texture evolution can be predicted by high-resolution modeling of crystals. Unfortunately, the simulation mesh gets distorted during the deformation because of the heterogeneity of the plastic…