Knezevic, V.; Sauthoff, G.: Strengthening of Martensitic/Ferritic 12%Cr Model Steels Through Laves Phase Precipitation. Euromat 2003, 8th European Congress on Advanced Materials and Processes, München, Germany (2003)
Risanti, D. D.; Sauthoff, G.: Strengthening of Hot Corrosion-Resistant Fe-Al alloys Through Laves Phase Precipitation. Euromat 2003, 8th European Congress on Advanced Materials and Processes, München, Germany (2003)
Stallybrass, C.; Sauthoff, G.: Ferritic Fe–Al–Ni–Cr alloys for high temperature applications. Thirteenth International Conference on the Strength of Materials (ICSMA XIII), Budapest, Hungary (2003)
Schneider, A.; Falat, L.; Sauthoff, G.; Frommeyer, G.: Microstructures and Mechanical Properties of Fe–Al–C and Fe–Al–M–C (M = Ti, V, Nb, Ta) Alloys. TMS Annual Meeting - Intern. Symp. Intermetallic and Advanced Metallic Materials - A Symposium Dedicated to Dr. C. T. Li on His 65th Birthday, San Diego, CA, USA (2003)
Stein, F.; Palm, M.; Sauthoff, G.: Structures and Stability of Laves Phases. TMS Annual Meeting - Intern. Symp. Intermetallic and Advanced Metallic Materials - A Symposium Dedicated to Dr. C. T. Li on His 65th Birthday, San Diego, CA, USA (2003)
Schneider, A.; Frommeyer, G.; Sauthoff, G.: Intermetallics for High-Temperature Applications - Needs and Prospects. Intern. Symp. Progress of Metal Science, Tokyo (2002)
Stein, F.; Sauthoff, G.; Palm, M.: Intermetallic Phases and Phase Equilibria in the Fe–Zr and Fe–Zr–Al Systems. Discussion Meeting on Thermodynamics of Alloys (TOFA 2002), Rome, Italy (2002)
Palm, M.; Sauthoff, G.: Characterization and Processing of an Advanced Intermetallic NiAl-Base Intermetallic Alloy for High-Temperature Applications. Structural Intermetallics 2001 (ISSI-3), Jackson Hole, Wyoming (2002)
Stein, F.; Zhang, L.; Palm, M.; Sauthoff, G.: Al-Ti Alloys with Al-Rich Titanium Aluminides: Phase Equilibria, Evolution of Phases and Strength of Lamellar TiAl+r-Al2Ti Alloys. Structural Intermetallics 2001 (ISSI-3), Jackson Hole, Wyoming, USA (2002)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Many important phenomena occurring in polycrystalline materials under large plastic strain, like microstructure, deformation localization and in-grain texture evolution can be predicted by high-resolution modeling of crystals. Unfortunately, the simulation mesh gets distorted during the deformation because of the heterogeneity of the plastic…
About 90% of all mechanical service failures are caused by fatigue. Avoiding fatigue failure requires addressing the wide knowledge gap regarding the micromechanical processes governing damage under cyclic loading, which may be fundamentally different from that under static loading. This is particularly true for deformation-induced martensitic…
With the support of DFG, in this project the interaction of H with mechanical, chemical and electrochemical properties in ferritic Fe-based alloys is investigated by the means of in-situ nanoindentation, which can characterize the mechanical behavior of independent features within a material upon the simultaneous charge of H.
The full potential of energy materials can only be exploited if the interplay between mechanics and chemistry at the interfaces is well known. This leads to more sustainable and efficient energy solutions.