Prabhakar, J. M.; Ostendorf, A.: Fundamental investigation of the cathodic delamination behaviour of model polymer coating on novel chromium-based coatings electrodeposited from a trivalent chromium-formate electrolyte. Dissertation, Ruhr-Universität Bochum, Fakultät für Maschinenbau (2022)
Ganapathi, A.; Stratmann, M.: The hydrogen electrode in the “dry”: on the effect of electrode material and relative humidity. Dissertation, Ruhr-Universität Bochum, Fakultät für Maschinenbau (2022)
Yin, Y.: Self-heating coatings based on conducting polymer for intelligent corrosion protection. Dissertation, Ruhr-Universität Bochum, Fakultät für Maschinenbau (2022)
Corrêa da Silva, C.: Investigation of the kinetics of selective oxidation of iron model alloys during simulated. Dissertation, Ruhr-Universität Bochum (2020)
Uebel, M.: Release and transport of corrosion inhibitors in self-healing coatings for intelligent corrosion protection. Dissertation, Ruhr-Universität Bochum (2019)
Merz, A.: Investigation of the “Protection Zone”, a novel mechanism to inhibit delamination of composite organic coatings containing conducting polymer. Dissertation, Ruhr-Universität Bochum (2019)
Wu, C.-H.: The Principle and Applications of Scanning Kelvin Probe based Hydrogen Detection Technique on Pd-coated and Oxide Covered Surface. Dissertation, Ruhr-Universität Bochum (2019)
Hu, Q.: A Contribution to Elucidate Interfacial Electric Double Layer Structures and Their Effects on Tribological Phenomena Using Force Microscopy. Dissertation, Fakultät für Maschinenbau der Ruhr-Universität Bochum, Bochum, Germany (2018)
Dandapani, V.: Hydrogen Permeation based Potentiometry as a New Quantification Tool for Electrochemical Reactivity at Buried Interfaces and under Nanoscopic Electrolyte Layers. Dissertation, Ruhr-Universität Bochum, Bochum, Germany (2017)
Toparli, C.: Passivity and passivity breakdown on copper: In situ and operando observation of surface oxides. Dissertation, Ruhr-Universität Bochum, Fakultät Maschinenbau, Bochum, Germany (2017)
Polymeros, G.: Performance of catalysts in electrode structure – bridging the gap between fundamental catalyst properties and behavior in real applications. Dissertation, Ruhr-Universität Bochum, Fakultät für Maschinenbau, Bochum, Germany (2017)
Frenznick, S.: In-situ Untersuchungen zu Benetzungsverhalten und Grenzflächenreaktionen beim Feuerverzinken legierter Stähle. Dissertation, Ruhr-Universität-Bochum, Fakultät für Maschinenbau, Bochum, Germany (2009)
Walczak (vorm. Stempniewicz), M.: Release Studies on Mesoporous Microcapsules for New Corrosion Protection Systems. Dissertation, Ruhr-Universität, Fakultät für Maschinenbau, Institut für Werkstoffe, Bochum, Germany (2007)
Rohwerder, M.: Wasserstoff in Metallen: neue Messverfahren zum Nachweis mit hoher räumlicher Auflösung. Habilitation, Ruhr-Universität Bochum, Bochum, Germany (2016)
Hydrogen in aluminium can cause embrittlement and critical failure. However, the behaviour of hydrogen in aluminium was not yet understood. Scientists at the Max-Planck-Institut für Eisenforschung were able to locate hydrogen inside aluminium’s microstructure and designed strategies to trap the hydrogen atoms inside the microstructure. This can…
This project aims to develop a micromechanical metrology technique based on thin film deposition and dewetting to rapidly assess the dynamic thermomechanical behavior of multicomponent alloys. This technique can guide the alloy design process faster than the traditional approach of fabrication of small-scale test samples using FIB milling and…
Materials degradation due to wear and corrosion is a major issue that can lead to efficiency loss or even failure. As wear may accelerate corrosion and corrosion may accelerate wear, this interaction is of increasing interest in the wind, hydroelectric, oil and gas energy domains and in the bio-medical field.
In this project, the electrochemical and corrosion behavior of high entropy alloys (HEAs) have been investigated by combining a micro-electrochemical scanning flow cell (SFC) and an inductively coupled plasma mass spectroscopy (ICP-MS) element analysis.
Within this project, we will use a green laser beam source based selective melting to fabricate full dense copper architectures. The focus will be on identifying the process parameter-microstructure-mechanical property relationships in 3-dimensional copper lattice architectures, under both quasi-static and dynamic loading conditions.
The aim of the current study is to investigate electrochemical corrosion mechanisms by examining the metal-liquid nanointerfaces. To achieve this, corrosive fluids will be strategically trapped within metal structures using novel additive micro fabrication techniques. Subsequently, the nanointerfaces will be analyzed using cryo-atom probe…
In this project, the hydrogen embrittlement mechanisms in several types of high-entropy alloys (HEAs) have been investigated through combined techniques, e.g., low strain rate tensile testing under in-situ hydrogen charging, thermal desorption spectroscopy (TDS),...