Dehm, G.; Scheu, C.; Bamberger, M. S.: Microstructure of Iron Substrates Borided with Ni2B Particles by Laser-Induced Surface-Alloying. Zeitschrift für Metallkunde 90 (11), pp. 920 - 929 (1999)
Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe (Materials Resaerch Symposium Proceedings, Phase Transformations and Systems Driven far from Equilibrium, 481). MRS Fall Meeting´97, Boston, MA, USA. (2001)
Rashkova, B.; Cohen, S. S.; Goren-Muginstein, G.; Bamberger, M. S.; Dehm, G.: Analytical and high resolution TEM analysis of precipitation hardening in Mg–Zn–Sn alloys. In: Proceedings of the 7th Multinational Congress on Microscopy 2005, pp. 183 - 184 (Eds. Ceh, M.; Drazic, G.; Fidler, S.). 7th Multinational Congress on Microscopy 2005, Portorož, Slovenia, June 26, 2005 - June 30, 2005. (2005)
Cohen, S. S.; Goren-Muginstein, G. R.; Avraham, S.; Dehm, G.; Bamberger, M. S.: Phase formation, precipitation and strengthening mechanisims in Mg–Zn–Sn and Mg–Zn–Sn–Ca alloys. In: Symposium on Magnesium Technology 2004, pp. 301 - 305. TMS Annual Meeting, Charlotte, NC, USA, March 14, 2004 - March 18, 2004. (2004)
Dehm, G.; Bamberger, M. S.: Microstructure and Properties of Ferrous Substrates Laser-Alloyed with Boride Particles. In: Proc. of the European Conference on Laser Treatment of Materials, pp. 221 - 226 (Ed. Mordike, B. L.). ECLAT 98, Hannover, Germany, September 22, 1998 - September 23, 1998. Werkstoff-Informationsgesellschaft mbH, Frankfurt, Germany (1998)
Medres, B.; Shepeleva, L.; Ryk, G.; Dehm, G.; Bamberger, M. S.; Kaplan, W. D.: The Pecularities of Steels Laser Treatment with CrB2 and Ni2B Powders. In: ICALEO '98: laser materials processing conference: proceedings, Vol. 2, pp. D51 - D57. International Congress on Applications of Lasers and Electro-Optics’98, Orlando, FL, USA. (1998)
Dehm, G.; Scheu, C.; Bamberger, M. S.: Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe. In: Laser Materials Processing, Vol. 83a, pp. 128 - 137. International Congress on Applications of Lasers and Electro-Optics’97, San Diego, CA, USA, 1997. (1997)
Hydrogen in aluminium can cause embrittlement and critical failure. However, the behaviour of hydrogen in aluminium was not yet understood. Scientists at the Max-Planck-Institut für Eisenforschung were able to locate hydrogen inside aluminium’s microstructure and designed strategies to trap the hydrogen atoms inside the microstructure. This can…
In this project, the effects of scratch-induced deformation on the hydrogen embrittlement susceptibility in pearlite is investigated by in-situ nanoscratch test during hydrogen charging, and atomic scale characterization. This project aims at revealing the interaction mechanism between hydrogen and scratch-induced deformation in pearlite.
Hydrogen at crack tips can embrittle steels and lead to catastrophic material failure. In this project we develop a continuum model for the formation of hydride zones in the tensile regions of a crack tip. It changes the fracture properties of static and propagating fractures.
In this project, we directly image and characterize solute hydrogen and hydride by use of atom probe tomography combined with electron microscopy, with the aim to investigate H interaction with different phases and lattice defects (such as grain boundaries, dislocation, etc.) in a set of specimens of commercially pure Ti, model and commercial…
The goal of this project is to develop an environmental chamber for mechanical testing setups, which will enable mechanical metrology of different microarchitectures such as micropillars and microlattices, as a function of temperature, humidity and gaseous environment.
This project aims to develop a micromechanical metrology technique based on thin film deposition and dewetting to rapidly assess the dynamic thermomechanical behavior of multicomponent alloys. This technique can guide the alloy design process faster than the traditional approach of fabrication of small-scale test samples using FIB milling and…
Hydrogen embrittlement is a persistent mode of failure in modern structural materials. The processes related to HE span various time and spatial scales. Thus we are establishing multiscale approaches that are based on the parameters and insights obtained by accurate ab initio calculations in order to simulate HE at the continuum level.
In this project, the electrochemical and corrosion behavior of high entropy alloys (HEAs) have been investigated by combining a micro-electrochemical scanning flow cell (SFC) and an inductively coupled plasma mass spectroscopy (ICP-MS) element analysis.
Within this project, we will use a green laser beam source based selective melting to fabricate full dense copper architectures. The focus will be on identifying the process parameter-microstructure-mechanical property relationships in 3-dimensional copper lattice architectures, under both quasi-static and dynamic loading conditions.