Vogel, D.; Renner, F. U.; Rohwerder, M.; Stratmann, M.: Novel setups pushing the limits of high-temperature reaction studies. Gordon Research Conference on High Temperature Corrosion, New London, NH, USA (2010)
Posner, R.; Wapner, K.; Stratmann, M.; Grundmeier, G.: Hydrated Ion Transport at Polymer/Oxide/Metal-Interfaces in Non-Corrosive Atmosphere: Influence of Electric Field Gradients. Gordon Conference Graduate Research Seminar on Aqueous Corrosion, Colby Sawyer College, New London, NH, USA (2008)
Venzlaff, H.; Enning, D. R.; Widdel, F.; Stratmann, M.; Hassel, A. W.: Microbial corrosion induced by a highly aggressive SRB strain. 2nd International IMPRS-SurMat Workshop on Surface and Interface Engineering in Advanced Materials, Bochum, Germany (2008)
Dönecke, K.; Hassel, A. W.; Stratmann, M.: Erosion-Corrosion and Repassivation of AISI 302 Stainless Steel in different Elec-trolytes after Multiple and Single Particle Impingements. 6th International Symposium on Electrochemical Micro & Nanosystem Technologies, Bonn, Germany (2006)
Lill, K. A.; Stratmann, M.; Frommeyer, G.; Hassel, A. W.: Investigations on anisotropy of nickelfree alloys with combined local and trace analysis. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Mingers, A. M.; Hassel, A. W.; Stratmann, M.; van der Heijden, M.: Korrosionsuntersuchungen an triboresistenten Höchstleistungsbeschichtungen. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Smith, A. J.; Hassel, A. W.; Stratmann, M.: In-situ Untersuchungen zur Winkelabhängigkeit von Einzelpartikeltreffern in der Partikelinduzierten Strömungskorrosion. GDCh, Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Yadav, A. P.; Manthey, A.; Hassel, A. W.; Stratmann, M.; Antonissen, J.: Effect of Small Compositional Changes on the Atmospheric Corrosion Behaviour of Weathering Steels. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Wapner, K.; Stratmann, M.; Grundmeier, G.: Non-destructive, In-Situ Measurement of De-Adhesion Processes at Buried Adhesive/Metal Interfaces by Means of a New Scanning Kelvin Probe Blister Test. EUROMAT 2005, Prague, Czech Republic (2005)
Smith, A.; Stratmann, M.; Hassel, A. W.: Detektion von Einzelpartikeltreffern durch Messung der Stromtransienten unter Tribokorrosionsbedingungen. Bunsentagung 2005, Frankfurt, Germany (2005)
Bonk, S.; Wicinski, M.; Hassel, A. W.; Stratmann, M.: Elektrochemische Untersuchungen verzinkter Stähle in alkalischer Sulfatlösung bei verschiedenen pH-Werten. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Lill, K. A.; Hassel, A. W.; Stratmann, M.: Korrosionsuntersuchungen auf einzelnen Körnern einer neuen Klasse ferritischer FeAlCr Leichtbaustähle. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Mingers, A. M.; Hassel, A. W.; Stratmann, M.; van der Heijden, M.: Korrosionsuntersuchungen an triboresistenten Höchstleistungsschichten. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Neelakantan, L.; Georgiou, M.; Stratmann, M.; Hassel, A. W.; Fushimi, K.: On the mechanism of electropolishing of NiTi shape memory alloys. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Smith, A. J.; Tan, K. S.; Stratmann, M.; Hassel, A. W.: Korrelation von “Jet impingement” und Mikroindentation Versuchen. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Satori, H.; Hassel, A. W.; Rohwerder, M.; Stratmann, M.: Finite Element Simulation of the Cathodic Delamination Process of Coatings on Metal Surfaces. 55th Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)
Smith, A.; Stratmann, M.; Hassel, A. W.: Repassivation Transients from Single Particle Impingement on Disk Shaped Micro-electrodes. 55th Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)
Tan, K. S.; Hassel, A. W.; Stratmann, M.: Micro-indenter for tribo-corrosion investigations. 5th European Symposium on Nanomechanical Testing, Hückelhoven, Germany (2004)
Baumert, B.; Stratmann, M.; Rohwerder, M.: Formability of Ultra-Thin Plasma-Polymer Films Deposited on Metal Sheet: Mesoscopic and Nanoscopic Aspects of Defect Formation. Symposium on Thin Films - Stresses and Mechanical Properties X held at the 2003 MRS Fall Meeting, Boston, MA, USA (2003)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
Photovoltaic materials have seen rapid development in the past decades, propelling the global transition towards a sustainable and CO2-free economy. Storing the day-time energy for night-time usage has become a major challenge to integrate sizeable solar farms into the electrical grid. Developing technologies to convert solar energy directly into…
It is very challenging to simulate electron-transfer reactions under potential control within high-level electronic structure theory, e. g. to study electrochemical and electrocatalytic reaction mechanisms. We develop a novel method to sample the canonical NVTΦ or NpTΦ ensemble at constant electrode potential in ab initio molecular dynamics…
The field of micromechanics has seen a large progress in the past two decades, enabled by the development of instrumented nanoindentation. Consequently, diverse methodologies have been tested to extract fundamental properties of materials related to their plastic and elastic behaviour and fracture toughness. Established experimental protocols are…
Statistical significance in materials science is a challenge that has been trying to overcome by miniaturization. However, this process is still limited to 4-5 tests per parameter variance, i.e. Size, orientation, grain size, composition, etc. as the process of fabricating pillars and testing has to be done one by one. With this project, we aim to…
Crystal Plasticity (CP) modeling [1] is a powerful and well established computational materials science tool to investigate mechanical structure–property relations in crystalline materials. It has been successfully applied to study diverse micromechanical phenomena ranging from strain hardening in single crystals to texture evolution in…