Möbus, G.; Schumann, E.; Dehm, G.; Rühle, M.: Measurement of Coherency States of Metal-Ceramic Interfaces by HRTEM Image Processing. Physica Status Solidi A 150 (1), pp. 77 - 87 (1995)
Dehm, G.; Rühle, M.; Ding, G.; Raj, R.: Growth and Structure of Copper Thin Films Deposited on (0001) Sapphire by Molecular Beam Epitaxy. Philosophical Magazine B-Physics of Condensed Matter Statistical Mechanics Electronic Optical and Magnetic Properties 71 (6), pp. 1111 - 1124 (1995)
Kirchlechner, C.; Kečkéš, J.; Micha, J.-S.; Dehm, G.: In Situ μLaue: Instrumental Setup for the Deformation of Micron Sized Samples. In: Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications: Second Edition, pp. 425 - 438 (Eds. Staron, P.; Schreyer, A.; Clemens, H.; Mayer, S.). wiley, Hoboken, NJ, USA (2017)
Dehm, G.; Legros, M.; Kiener, D.: In-situ TEM Straining Experiments: Recent Progress in Stages and Small-Scale Mechanics. In: In-situ Electron Microscopy: SEM and TEM Applications in Physics, Chemistry and Materials Science, pp. 227 - 254 (Ed. Dehm, G.). Wiley VCH Verlag, Weinheim, Germany (2012)
Dehm, G.: Das Erich-Schmid-Institut für Materialwissenschaft (ESI) der Österreichischen Akademie der Wissenschaften. In: Handbuch der Nanoanalytik Steiermark, NanoNet Styria, 1 Ed., pp. 1 - 311 (Ed. Rom , W.). W. Rom, Graz, Austria (2005)
Dehm, G.; Müllner, P.: TEM-Observation of Dislocations in Polycrystalline Metal Films. In: The Encyclopedia of Materials: Science and Technology, Vol. 1, pp. 2329 - 2331 (Eds. Buschow, .H.J.; Cahn, R.; Flemings, M.; Ilschner, .; Kramer, E. et al.) (2001)
Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe (Materials Resaerch Symposium Proceedings, Phase Transformations and Systems Driven far from Equilibrium, 481). MRS Fall Meeting´97, Boston, MA, USA. (2001)
Bieler, S.; Kang, S. G.; Heußen, D.; Ramachandramoorthy, R.; Dehm, G.; Weinberg, K.: Investigation of copper lattice structures using a Split Hopkinson Pressure Bar. Proceedings of Applied Mathematics and Mechanics, Special Issue: 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) 21 (1), e202100155, (2021)
Rehman, U.; Tian, C.; Stein, F.; Best, J. P.; Dehm, G.: Fracture Toughness of the Intermetallic C15 Al2Ca Laves Phase Determined using a Micropillar Splitting Technique. In: Intermetallics 2021, pp. 155 - 156. Intermetallics 2021, Kloster Banz, Bad Staffelstein, Germany, October 04, 2021 - October 08, 2021. (2021)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Micromechanics of Co–Nb Laves Phases: Strength, Fracture Toughness, and Hadrness as Function of Composition and Crystal Structure. In: Joint EPRI – 123HIMAT International Conference on Advances in High-Temperature Materials, 2019, pp. 11 - 21 (Eds. Shingledecker, J.; Takeyama, M.). EPRI's 9th International Conf on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conf on High-Temperature Materials, Nagasaki, Japan, October 21, 2019 - October 24, 2019. (2019)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Deformation of Micropillars of Cubic and Hexagonal NbCo2 Laves Phases under Uniaxial Compression at Room Temperature. In: Proc. Intermetallics 2017, pp. 199 - 200 (Eds. Heilmaier, M.; Krüger, M.; Mayer, S.; Palm, M.; Stein, F.). Intermetallics 2017, Educational Center Kloster Banz, Bad Staffelstein, Germany, October 02, 2017 - October 06, 2017. Conventus Congressmanagement & Marketing GmbH, Jena, Germany (2017)
Hieke, S. W.; Willinger, M. G.; Wang, Z.-J.; Richter, G.; Dehm, G.; Scheu, C.: In situ electron microscopy – insights in solid state dewetting of epitaxial Al thin films on sapphire. In: Microscopy Conference 2017 (MC 2017) - Proceedings (Ed. Laue, M.). Microscopy Conference 2017 (MC 2017), Lausanne, Switzerland, August 21, 2017 - August 25, 2017. Universität Regensburg, Regensburg (2017)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
Crystal plasticity modelling has gained considerable momentum in the past 20 years [1]. Developing this field from its original mean-field homogenization approach using viscoplastic constitutive hardening rules into an advanced multi-physics continuum field solution strategy requires a long-term initiative. The group “Theory and Simulation” of…
The project Hydrogen Embrittlement Protection Coating (HEPCO) addresses the critical aspects of hydrogen permeation and embrittlement by developing novel strategies for coating and characterizing hydrogen permeation barrier layers for valves and pumps used for hydrogen storage and transport applications.
The structure of grain boundaries (GBs) is dependent on the crystallographic structure of the material, orientation of the neighbouring grains, composition of material and temperature. The abovementioned conditions set a specific structure of the GB which dictates several properties of the materials, e.g. mechanical behaviour, diffusion, and…
The goal of this project is to develop an environmental chamber for mechanical testing setups, which will enable mechanical metrology of different microarchitectures such as micropillars and microlattices, as a function of temperature, humidity and gaseous environment.
The development of pyiron started in 2011 in the CM department to foster the implementation, rapid prototyping and application of the highly advanced fully ab initio simulation techniques developed by the department. The pyiron platform bundles the different steps occurring in a typical simulation life cycle in a single software platform and…
The project focuses on development and design of workflows, which enable advanced processing and analyses of various data obtained from different field ion emission microscope techniques such as field ion microscope (FIM), atom probe tomography (APT), electronic FIM (e-FIM) and time of flight enabled FIM (tof-FIM).