Hamou, R. F.; Biedermann, P. U.; Erbe, A.; Rohwerder, M.: Screening effects in probing the double layer by scanning electrochemical potential microscopy. Comsol European Conference October 2009, Milan, Italy (2009)
Salgin, B.; Rohwerder, M.: A New Approach to Determine Ion Mobility Coefficients for Delamination Scenarios. electrochem09 and 50th Corrosion Science Symposium, Manchester, UK (2009)
Salgin, B.; Rohwerder, M.: A New Approach to Determine Ion Mobility Coefficients for Delamination Scenarios. 60th Annual Meeting of the International Meeting of the International Society of Electrochemistry, Beijing, China (2009)
Hamou, R. F.; Biedermann, P. U.; Erbe, A.; Rohwerder, M.: Simulation of probing the electric double layer by scanning electrochemical potential microscopy (SECPM). 11th International Fischer Symposium on Microscopy in Electrochemistry, Benediktbeuern, Germany (2009)
Rohwerder, M.: Kelvin Probe Microscopy in Materials Science: Introduction, Overview and Future Perspectives. 23rd International Conference on Surface Modification Technologies (SMT 23), Chennai, India (2009)
Rohwerder, M.: Intelligent corrosion protection by organic coatings based on conducting polymers. Corrosion Cluster Workshop and Protection of Metals with Coatings, NIMS, Tsukuba, Japan (2009)
Swaminathan, S.; Spiegel, M.; Rohwerder, M.: Investigations on external/internal oxidation of quarternary model alloy during annealing in N2/H2: Role of dew point and dwelling time. 7th International Conference on the Microscopy of Oxidation, Chester, UK (2008)
Fenster, J. C.; Rohwerder, M.; Hassel, A. W.: Impedance-Titration: A Novel Method for Understanding the Kinetics of Corrosion in Aqueous Solutions. 59th Annual Meeting of the International Society of Electrochemistry, Sevilla, Spanien (2008)
Khan, T. R.; de la Fuenta, D.; Rohwerder, M.: Electrolytic co-deposition of SiO2 nanoparticles with zinc for improvement of corrosion protection. 59th Annual Meeting of the International Society of Electrochemistry, Seville, Spain (2008)
Stratmann, M.; Hassel, A. W.; Rohwerder, M.: Microelectrochemical Investigations of Interfaces and Surfaces of Advanced Materialks. 7th International Symposium on Electrochemical Micro- and Nanosystems, Ein-Gedi, Israel (2008)
Salgin, B.; Rohwerder, M.: Effects of Semiconducting Properties of Surface Oxide on the Delamination at the Polymer/Zinc Interface. SurMat Seminar, Kleve, Germany (2008)
Swaminathan, S.; Spiegel, M.; Rohwerder, M.: Effect of annealing conditions on the selective oxidation of quarternary model alloy. 4th International Conference on Diffusion in Solids and Liquids, Barcelona, Spain (2008)
Borodin, S.; Rohwerder, M.: Growth of high quality crystalline aluminium oxide films on Nb(110)/sapphire(11-20). 14th International Conference on Solid Films and Surfaces (ICSFS), Dublin, Ireland (2008)
Borodin, S.; Rohwerder, M.: Preparation of model single crystalline aluminium oxide films suitable for scanning tunnelling microscopy. DPG Tagung 2008, 72. Jahrestagung der Deutsche Physikalische Gesellschaft, Berlin, Germany (2008)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
In this project we work on correlative atomic structural and compositional investigations on Co and CoNi-based superalloys as a part of SFB/Transregio 103 project “Superalloy Single Crystals”. The task is to image the boron segregation at grain boundaries in the Co-9Al-9W-0.005B alloy.
This project aims to investigate the dynamic hardness of B2-iron aluminides at high strain rates using an in situ nanomechanical tester capable of indentation up to constant strain rates of up to 100000 s−1 and study the microstructure evolution across strain rate range.
This project deals with the phase quantification by nanoindentation and electron back scattered diffraction (EBSD), as well as a detailed analysis of the micromechanical compression behaviour, to understand deformation processes within an industrial produced complex bainitic microstructure.
Within this project, we will use a green laser beam source based selective melting to fabricate full dense copper architectures. The focus will be on identifying the process parameter-microstructure-mechanical property relationships in 3-dimensional copper lattice architectures, under both quasi-static and dynamic loading conditions.