Wang, X.; Grundmeier, G.: Thin multifunctional silver/fluorocarbon plasma polymer nanocomposite films on metals. The 9th International Conference on Nanostructured Materials, Rio de Janeiro, Brazil (2008)
Wang, X.; Grundmeier, G.: Combined spectroscopic, microscopic and electrochemical analysis of release properties of Ag-nanoparticles embedded in fluorocarbon plasma polymer films. The 58th Annual Meeting of the International Society of Electrochemistry, Banff, Canada (2007)
Wang, X.; Grundmeier, G.: Understanding of the Barrier and Release Properties of Thin Model Ag/HDFD-Plasma Polymer Nanocomposite Films. International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA, USA (2007)
Grundmeier, G.; Wang, X.; Barranco, V.; Ebbinghaus, P.: Structure and barrier properties of thin plasma polymers and metal/plasma polymer nanocomposite film. ACHEMA, Frankfurt a. M., Germany (2006)
Wang, X.; Grundmeier, G.: Investigation of Structure and Stability of Silver Nanoparticles in Fluorocarbon Plasma Polymer Films. 13. Bundesdeutsche Fachtagung für Plasmatechnologie, Bochum, Germany (2007)
The wide tunability of the fundamental electronic bandgap by size control is a key attribute of semiconductor nanocrystals, enabling applications spanning from biomedical imaging to optoelectronic devices. At finite temperature, exciton-phonon interactions are shown to exhibit a strong impact on this fundamental property.
Enabling a ‘hydrogen economy’ requires developing fuel cells satisfying economic constraints, reasonable operating costs and long-term stability. The fuel cell is an electrochemical device that converts chemical energy into electricity by recombining water from H2 and O2, allowing to generate environmentally-friendly power for e.g. cars or houses…
The project Hydrogen Embrittlement Protection Coating (HEPCO) addresses the critical aspects of hydrogen permeation and embrittlement by developing novel strategies for coating and characterizing hydrogen permeation barrier layers for valves and pumps used for hydrogen storage and transport applications.
In this project we conduct together with Dr. Sandlöbes at RWTH Aachen and the department of Prof. Neugebauer ab initio calculations for designing new Mg – Li alloys. Ab initio calculations can accurately predict basic structural, mechanical, and functional properties using only the atomic composition as a basis.
Efficient harvesting of sunlight and (photo-)electrochemical conversion into solar fuels is an emerging energy technology with enormous promise. Such emerging technologies depend critically on materials systems, in which the integration of dissimilar components and the internal interfaces that arise between them determine the functionality.
In this project, we work on the use of a combinatorial experimental approach to design advanced multicomponent multi-functional alloys with rapid alloy prototyping. We use rapid alloy prototyping to investigate five multicomponent Invar alloys with 5 at.% addition of Al, Cr, Cu, Mn and Si to a super Invar alloy (Fe63Ni32Co5; at.%), respectively…
This study investigates the mechanical properties of liquid-encapsulated metallic microstructures created using a localized electrodeposition method. By encapsulating liquid within the complex metal microstructures, we explore how the liquid influences compressive and vibrational characteristics, particularly under varying temperatures and strain…
In this project we study - together with the department of Prof. Neugebauer and Dr. Sandlöbes at RWTH Aachen - the underlying mechanisms that are responsible for the improved room-temperature ductility in Mg–Y alloys compared to pure Mg.