Chatterjee, A.; Dehm, G.; Scheu, C.; Clemens, H.: Onset of microstructural instability in a fully lamellar Ti-46.5 at.% Al-4 al.% (Cr,Nb,Ta,B) alloy during short-term creep. Zeitschrift für Metallkunde/Materials Research and Advanced Techniques 91 (9), pp. 755 - 760 (2000)
Dehm, G.; Scheu, C.; Bamberger, M. S.: Microstructure of Iron Substrates Borided with Ni2B Particles by Laser-Induced Surface-Alloying. Zeitschrift für Metallkunde 90 (11), pp. 920 - 929 (1999)
Dehm, G.; Scheu, C.; Rühle, M.; Raj, R.: Growth and Structure of Internal Cu/Al2O3 and Cu/Ti/Al2O3 Interfaces. Acta Materialia 46 (3), pp. 759 - 772 (1998)
Scheu, C.; Dehm, G.; Kaplan, W. D.; Wagner, F.; Claussen, N. E.: Microstructure and Phase Evolution of Niobium-Aluminide-Alumina Composites Prepared by Melt-Infiltration. Physica Status Solidi A 166 (1), pp. 241 - 255 (1998)
Dehm, G.; Scheu, C.; Möbus, G.; Brydson, R.; Rühle, M.: Synthesis of Analytical and High Resolution Transmission Electron Microscopy to Determine the Interface Structure of Cu/Al2O3. Ultramicroscopy 67 (1-4), pp. 207 - 217 (1997)
Dehm, G.; Scheu, C.; Raj, R.; Rühle, M.: Growth, structure and interfaces of Cu and Cu/Ti thin films on (0001)alpha-Al2O3. Materials Science Forum 207-209 (1), pp. 217 - 220 (1996)
Clemens, H.; Mayer, S.; Scheu, C.: Microstructure and Properties of Engineering Materials. In: Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications: Second Edition, pp. 3 - 20 (Eds. Schreyer, A.; Clemens, H.; Mayer, S.). wiley, Hoboken, NJ, USA (2017)
Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe (Materials Resaerch Symposium Proceedings, Phase Transformations and Systems Driven far from Equilibrium, 481). MRS Fall Meeting´97, Boston, MA, USA. (2001)
Hieke, S. W.; Willinger, M. G.; Wang, Z.-J.; Richter, G.; Dehm, G.; Scheu, C.: In situ electron microscopy – insights in solid state dewetting of epitaxial Al thin films on sapphire. In: Microscopy Conference 2017 (MC 2017) - Proceedings (Ed. Laue, M.). Microscopy Conference 2017 (MC 2017), Lausanne, Switzerland, August 21, 2017 - August 25, 2017. Universität Regensburg, Regensburg (2017)
Folger, A.; Wisnet, A.; Scheu, C.: Defects in as-grown vs. annealed rutile titania nanowires and their effect on properties. EMC 2016, 16th European Microscopy Congress, Lyon, France, August 28, 2016 - September 02, 2016. European Microscopy Congress 2016: Proceedings, pp. 409 - 410 (2016)
Hieke, S. W.; Dehm, G.; Scheu, C.: Investigation of solid state dewetting phenomena of epitaxial Al thin films on sapphire using electron microscopy. In: European Microscopy Congress 2016: Proceedings, pp. 203 - 204. The 16th European Microscopy Congress (EMC 2016), Lyon, France, August 28, 2016 - September 02, 2016. Wiley-VCH Verlag GmbH & Co KGaA (2016)
Cha, L.; Scheu, C.; Dehm, G.: A TEM study of ultra-fine lamellar structures in titanium aluminide. In: 9th Multinational Microscopy Conference 2009 Materials Science, Vol. 3, pp. 247 - 248 (Eds. Kothleitner, G.; Leisch, M.). 9th Multinational Microscopy Conference 2009, Graz, Austria, August 30, 2009 - September 04, 2009. Verlag der Technischen Universität Graz, Graz, Austria (2009)
In this project, we work on a generic solution to design advanced high-entropy alloys (HEAs) with enhanced magnetic properties. By overturning the concept of stabilizing solid solutions in HEAs, we propose to render the massive solid solutions metastable and trigger spinodal decomposition. The motivation for starting from the HEA for this approach…
A wide range of steels is nowadays used in Additive Manufacturing (AM). The different matrix microstructure components and phases such as austenite, ferrite, and martensite as well as the various precipitation phases such as intermetallic precipitates and carbides generally equip steels with a huge variability in microstructure and properties.
In this project, we work on the use of a combinatorial experimental approach to design advanced multicomponent multi-functional alloys with rapid alloy prototyping. We use rapid alloy prototyping to investigate five multicomponent Invar alloys with 5 at.% addition of Al, Cr, Cu, Mn and Si to a super Invar alloy (Fe63Ni32Co5; at.%), respectively…
We have studied a nanocrystalline AlCrCuFeNiZn high-entropy alloy synthesized by ball milling followed by hot compaction at 600°C for 15 min at 650 MPa. X-ray diffraction reveals that the mechanically alloyed powder consists of a solid-solution body-centered cubic (bcc) matrix containing 12 vol.% face-centered cubic (fcc) phase. After hot compaction, it consists of 60 vol.% bcc and 40 vol.% fcc. Composition analysis by atom probe tomography shows that the material is not a homogeneous fcc–bcc solid solution
Magnetic properties of magnetocaloric materials is of utmost importance for their functional applications. In this project, we study the magnetic properties of different materials with the final goal to discover new magnetocaloric materials more suited for practical applications.
Laser Powder Bed Fusion (LPBF) is the most commonly used Additive Manufacturing processes. One of its biggest advantages it offers is to exploit its inherent specific process characteristics, namely the decoupling the solidification rate from the parts´volume, for novel materials with superior physical and mechanical properties. One prominet…