Vogel, D.; Renner, F. U.; Rohwerder, M.; Stratmann, M.: Novel setups pushing the limits of high-temperature reaction studies. Gordon Research Conference on High Temperature Corrosion, New London, NH, USA (2010)
Posner, R.; Wapner, K.; Stratmann, M.; Grundmeier, G.: Hydrated Ion Transport at Polymer/Oxide/Metal-Interfaces in Non-Corrosive Atmosphere: Influence of Electric Field Gradients. Gordon Conference Graduate Research Seminar on Aqueous Corrosion, Colby Sawyer College, New London, NH, USA (2008)
Venzlaff, H.; Enning, D. R.; Widdel, F.; Stratmann, M.; Hassel, A. W.: Microbial corrosion induced by a highly aggressive SRB strain. 2nd International IMPRS-SurMat Workshop on Surface and Interface Engineering in Advanced Materials, Bochum, Germany (2008)
Dönecke, K.; Hassel, A. W.; Stratmann, M.: Erosion-Corrosion and Repassivation of AISI 302 Stainless Steel in different Elec-trolytes after Multiple and Single Particle Impingements. 6th International Symposium on Electrochemical Micro & Nanosystem Technologies, Bonn, Germany (2006)
Lill, K. A.; Stratmann, M.; Frommeyer, G.; Hassel, A. W.: Investigations on anisotropy of nickelfree alloys with combined local and trace analysis. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Mingers, A. M.; Hassel, A. W.; Stratmann, M.; van der Heijden, M.: Korrosionsuntersuchungen an triboresistenten Höchstleistungsbeschichtungen. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Smith, A. J.; Hassel, A. W.; Stratmann, M.: In-situ Untersuchungen zur Winkelabhängigkeit von Einzelpartikeltreffern in der Partikelinduzierten Strömungskorrosion. GDCh, Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Yadav, A. P.; Manthey, A.; Hassel, A. W.; Stratmann, M.; Antonissen, J.: Effect of Small Compositional Changes on the Atmospheric Corrosion Behaviour of Weathering Steels. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Wapner, K.; Stratmann, M.; Grundmeier, G.: Non-destructive, In-Situ Measurement of De-Adhesion Processes at Buried Adhesive/Metal Interfaces by Means of a New Scanning Kelvin Probe Blister Test. EUROMAT 2005, Prague, Czech Republic (2005)
Smith, A.; Stratmann, M.; Hassel, A. W.: Detektion von Einzelpartikeltreffern durch Messung der Stromtransienten unter Tribokorrosionsbedingungen. Bunsentagung 2005, Frankfurt, Germany (2005)
Bonk, S.; Wicinski, M.; Hassel, A. W.; Stratmann, M.: Elektrochemische Untersuchungen verzinkter Stähle in alkalischer Sulfatlösung bei verschiedenen pH-Werten. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Lill, K. A.; Hassel, A. W.; Stratmann, M.: Korrosionsuntersuchungen auf einzelnen Körnern einer neuen Klasse ferritischer FeAlCr Leichtbaustähle. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Mingers, A. M.; Hassel, A. W.; Stratmann, M.; van der Heijden, M.: Korrosionsuntersuchungen an triboresistenten Höchstleistungsschichten. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Neelakantan, L.; Georgiou, M.; Stratmann, M.; Hassel, A. W.; Fushimi, K.: On the mechanism of electropolishing of NiTi shape memory alloys. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Smith, A. J.; Tan, K. S.; Stratmann, M.; Hassel, A. W.: Korrelation von “Jet impingement” und Mikroindentation Versuchen. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Satori, H.; Hassel, A. W.; Rohwerder, M.; Stratmann, M.: Finite Element Simulation of the Cathodic Delamination Process of Coatings on Metal Surfaces. 55th Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)
Smith, A.; Stratmann, M.; Hassel, A. W.: Repassivation Transients from Single Particle Impingement on Disk Shaped Micro-electrodes. 55th Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)
Tan, K. S.; Hassel, A. W.; Stratmann, M.: Micro-indenter for tribo-corrosion investigations. 5th European Symposium on Nanomechanical Testing, Hückelhoven, Germany (2004)
Baumert, B.; Stratmann, M.; Rohwerder, M.: Formability of Ultra-Thin Plasma-Polymer Films Deposited on Metal Sheet: Mesoscopic and Nanoscopic Aspects of Defect Formation. Symposium on Thin Films - Stresses and Mechanical Properties X held at the 2003 MRS Fall Meeting, Boston, MA, USA (2003)
Hydrogen in aluminium can cause embrittlement and critical failure. However, the behaviour of hydrogen in aluminium was not yet understood. Scientists at the Max-Planck-Institut für Eisenforschung were able to locate hydrogen inside aluminium’s microstructure and designed strategies to trap the hydrogen atoms inside the microstructure. This can…
Hydrogen embrittlement affects high-strength ferrite/martensite dual-phase (DP) steels. The associated micromechanisms which lead to failure have not been fully clarified yet. Here we present a quantitative micromechanical analysis of the microstructural damage phenomena in a model DP steel in the presence of hydrogen.
We will investigate the electrothermomechanical response of individual metallic nanowires as a function of microstructural interfaces from the growth processes. This will be accomplished using in situ SEM 4-point probe-based electrical resistivity measurements and 2-point probe-based impedance measurements, as a function of mechanical strain and…
Hydrogen induced embrittlement of metals is one of the long standing unresolved problems in Materials Science. A hierarchical multiscale approach is used to investigate the underlying atomistic mechanisms.
Understanding hydrogen-assisted embrittlement of advanced structural materials is essential for enabling future hydrogen-based energy industries. A crucially important phenomenon in this context is the delayed fracture in high-strength structural materials. Factors affecting the hydrogen embrittlement are the hydrogen content,...
This project will aim at developing MEMS based nanoforce sensors with capacitive sensing capabilities. The nanoforce sensors will be further incorporated with in situ SEM and TEM small scale testing systems, for allowing simultaneous visualization of the deformation process during mechanical tests
The project aims to study corrosion, a detrimental process with an enormous impact on global economy, by combining denstiy-functional theory calculations with thermodynamic concepts.
Thermo-chemo-mechanical interactions due to thermally activated and/or mechanically induced processes govern the constitutive behaviour of metallic alloys during production and in service. Understanding these mechanisms and their influence on the material behaviour is of very high relevance for designing new alloys and corresponding…
Nickel-based alloys are a particularly interesting class of materials due to their specific properties such as high-temperature strength, low-temperature ductility and toughness, oxidation resistance, hot-corrosion resistance, and weldability, becoming potential candidates for high-performance components that require corrosion resistance and good…