Wicinski, M.; Hassel, A. W.; Stratmann, M.: Corrosion under Cyclic Conditions Monitored by a Simultaneous Scanning Kelvin Probe and Galvanic Current Measurement. 55rd Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)
Hassel, A. W.; Schneider, A.: Preparation and Characterisation of Rhenium Nano Electrode arrays. International Society of Electrochemistry, 2nd Spring meeting, Xiamen, China (2004)
Hassel, A. W.; Akiyama, E.; Smith, A.; Tan, K. S.; Stratmann, M.: Dynamic and Quasi Static Particle Impingement in Flow Corrosion. COST F2 2nd Workshop „Local Flow Effects in Hydrodynamic Systems”, Paris, France (2003)
Stratmann, M.; Hassel, A. W.; Spiegel, M.: Spektroskopische und reaktionskinetische Methoden zur Charakterisierung der Struktur, Eigenschaften und Stabilität von Metalloberflächen. 21. Vortrags- und Diskussionstagung Werkstoffprüfung 2003, Bad Neuenahr, Germany (2003)
Akiyama, E.; Hassel, A. W.; Stratmann, M.: A study of current transients caused by single particle impact on electrodes. 13th Asian Pacific Corrosion Control Conference, Osaka, Japan (2003)
Fushimi, K.; Hassel, A. W.; Stratmann, M.: Passive Film Formed on Shape Memory NiTi-Alloy in Sulfuric Acid. 13th Asian Pacific Corrosion Control Conference, Osaka, Japan (2003)
Hassel, A. W.; Akiyama, E.; Smith, A.; Tan, K. S.; Stratmann, M.: Dynamic and Quasi Static Particle Impingement in Flow Corrosion. Seminar an der Graduate School of Engineering der Universität von Hokkaido, Sapporo, Japan (2003)
Hassel, A. W.; Bonk, S.; Wicinski, M.; Stratmann, M.: Corrosion of zinc coated steel sheets under cyclic corrosion conditions. 13th Asian Pacific Corrosion Control Conference, Osaka, Japan (2003)
Tsuri, S.; Hassel, A. W.; Stratmann, M.: Electrochemical Behaviour of Low Alloy Steels during Atmospheric Corrosion. 13th Asian Pacific Corrosion Control Conference, Osaka, Japan (2003)
Akiyama, E.; Hassel, A. W.; Stratmann, M.: Measurements of electrochemical responses caused by a single particle impact in slurry impingement. 50th Zairyo-to-Kankyo Meeting, Okinawa, Japan (2003)
Bonk, S.; Tsuri, S.; Hassel, A. W.; Stratmann, M.: Construction of a cyclic corrosion test simulator. GDCH Jahrestagung 2003, Fachgruppe Angewandte Elektrochemie mit 8. Grundlagensymposium der GDCh, DECHEMA, DBG, München, Germany (2003)
Wicinski, M.; Hassel, A. W.; Stratmann, M.: Investigation of spatiotemporal potential and current distribution in microscopic corrosion cell. GDCH Jahrestagung 2003, Fachgruppe Angewandte Elektrochemie mit 8. Grundlagensymposium der GDCh, DECHEMA, DBG, München, Germany (2003)
Hassel, A. W.; Fushimi, K.; Stratmann, M.: Elektropolieren und Anodisieren von Nitinol. Institutsseminar des Lehrstuhls für Werkstoffe Ruhr-Universität Bochum Prof. Pohl, Bochum, Germany (2003)
Fushimi, K.; Hassel, A. W.; Stratmann, M.: Study on Electropolishing Behavior of Shape Memory NiTi-Alloy. 108th Meeting of The Surface Finishing Society of Japan, Utsunomiya, Japan (2003)
Bonk, S.; Wicinski, M.; Hassel, A. W.; Stratmann, M.: Sensitivity of pure zinc and zinc-alloyed steel sheets to pH-changes in alkaline electrolyte. Electrochem 2003, Southhampton, UK (2003)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
The utilization of Kelvin Probe (KP) techniques for spatially resolved high sensitivity measurement of hydrogen has been a major break-through for our work on hydrogen in materials. A relatively straight forward approach was hydrogen mapping for supporting research on hydrogen embrittlement that was successfully applied on different materials, and…
This project will aim at developing MEMS based nanoforce sensors with capacitive sensing capabilities. The nanoforce sensors will be further incorporated with in situ SEM and TEM small scale testing systems, for allowing simultaneous visualization of the deformation process during mechanical tests
Photovoltaic materials have seen rapid development in the past decades, propelling the global transition towards a sustainable and CO2-free economy. Storing the day-time energy for night-time usage has become a major challenge to integrate sizeable solar farms into the electrical grid. Developing technologies to convert solar energy directly into…
It is very challenging to simulate electron-transfer reactions under potential control within high-level electronic structure theory, e. g. to study electrochemical and electrocatalytic reaction mechanisms. We develop a novel method to sample the canonical NVTΦ or NpTΦ ensemble at constant electrode potential in ab initio molecular dynamics…
The field of micromechanics has seen a large progress in the past two decades, enabled by the development of instrumented nanoindentation. Consequently, diverse methodologies have been tested to extract fundamental properties of materials related to their plastic and elastic behaviour and fracture toughness. Established experimental protocols are…