Chatterjee, A.; Dehm, G.; Scheu, C.; Clemens, H.: Onset of microstructural instability in a fully lamellar Ti-46.5 at.% Al-4 al.% (Cr,Nb,Ta,B) alloy during short-term creep. Zeitschrift für Metallkunde/Materials Research and Advanced Techniques 91 (9), pp. 755 - 760 (2000)
Dehm, G.; Scheu, C.; Bamberger, M. S.: Microstructure of Iron Substrates Borided with Ni2B Particles by Laser-Induced Surface-Alloying. Zeitschrift für Metallkunde 90 (11), pp. 920 - 929 (1999)
Dehm, G.; Scheu, C.; Rühle, M.; Raj, R.: Growth and Structure of Internal Cu/Al2O3 and Cu/Ti/Al2O3 Interfaces. Acta Materialia 46 (3), pp. 759 - 772 (1998)
Scheu, C.; Dehm, G.; Kaplan, W. D.; Wagner, F.; Claussen, N. E.: Microstructure and Phase Evolution of Niobium-Aluminide-Alumina Composites Prepared by Melt-Infiltration. Physica Status Solidi A 166 (1), pp. 241 - 255 (1998)
Dehm, G.; Scheu, C.; Möbus, G.; Brydson, R.; Rühle, M.: Synthesis of Analytical and High Resolution Transmission Electron Microscopy to Determine the Interface Structure of Cu/Al2O3. Ultramicroscopy 67 (1-4), pp. 207 - 217 (1997)
Dehm, G.; Scheu, C.; Raj, R.; Rühle, M.: Growth, structure and interfaces of Cu and Cu/Ti thin films on (0001)alpha-Al2O3. Materials Science Forum 207-209 (1), pp. 217 - 220 (1996)
Clemens, H.; Mayer, S.; Scheu, C.: Microstructure and Properties of Engineering Materials. In: Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications: Second Edition, pp. 3 - 20 (Eds. Schreyer, A.; Clemens, H.; Mayer, S.). wiley, Hoboken, NJ, USA (2017)
Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe (Materials Resaerch Symposium Proceedings, Phase Transformations and Systems Driven far from Equilibrium, 481). MRS Fall Meeting´97, Boston, MA, USA. (2001)
Hieke, S. W.; Willinger, M. G.; Wang, Z.-J.; Richter, G.; Dehm, G.; Scheu, C.: In situ electron microscopy – insights in solid state dewetting of epitaxial Al thin films on sapphire. In: Microscopy Conference 2017 (MC 2017) - Proceedings (Ed. Laue, M.). Microscopy Conference 2017 (MC 2017), Lausanne, Switzerland, August 21, 2017 - August 25, 2017. Universität Regensburg, Regensburg (2017)
Folger, A.; Wisnet, A.; Scheu, C.: Defects in as-grown vs. annealed rutile titania nanowires and their effect on properties. EMC 2016, 16th European Microscopy Congress, Lyon, France, August 28, 2016 - September 02, 2016. European Microscopy Congress 2016: Proceedings, pp. 409 - 410 (2016)
Hieke, S. W.; Dehm, G.; Scheu, C.: Investigation of solid state dewetting phenomena of epitaxial Al thin films on sapphire using electron microscopy. In: European Microscopy Congress 2016: Proceedings, pp. 203 - 204. The 16th European Microscopy Congress (EMC 2016), Lyon, France, August 28, 2016 - September 02, 2016. Wiley-VCH Verlag GmbH & Co KGaA (2016)
Cha, L.; Scheu, C.; Dehm, G.: A TEM study of ultra-fine lamellar structures in titanium aluminide. In: 9th Multinational Microscopy Conference 2009 Materials Science, Vol. 3, pp. 247 - 248 (Eds. Kothleitner, G.; Leisch, M.). 9th Multinational Microscopy Conference 2009, Graz, Austria, August 30, 2009 - September 04, 2009. Verlag der Technischen Universität Graz, Graz, Austria (2009)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Smaller is stronger” is well known in micromechanics, but the properties far from the quasi-static regime and the nominal temperatures remain unexplored. This research will bridge this gap on how materials behave under the extreme conditions of strain rate and temperature, to enhance fundamental understanding of their deformation mechanisms. The…
In this project we developed a phase-field model capable of describing multi-component and multi-sublattice ordered phases, by directly incorporating the compound energy CALPHAD formalism based on chemical potentials. We investigated the complex compositional pathway for the formation of the η-phase in Al-Zn-Mg-Cu alloys during commercial…
In AM, parts are built from layer by layer fusion of raw material (eg. wire, powder etc.). Such layer by layer application of heat results in a time-temperature profile which is fundamentally different from any of the contemporary heat treatments.
Previous work in the group has established that this unique thermal profile can be exploited for microstructural modifications (eg. clustering, precipitation) during manufacturing. The aim of this work is to develop a fundamental understanding of such a strongly non-linear, peak-like thermal history on the precipitation kinetics.
Understanding the deformation mechanisms observed in high performance materials, such as superalloys, allows us to design strategies for the development of materials exhibiting enhanced performance. In this project, we focus on the combination of structural information gained from electron microscopy and compositional measurements from atom probe…
Understanding hydrogen-microstructure interactions in metallic alloys and composites is a key issue in the development of low-carbon-emission energy by e.g. fuel cells, or the prevention of detrimental phenomena such as hydrogen embrittlement. We develop and test infrastructure, through in-situ nanoindentation and related techniques, to study…