Yamaguchi, M.; Horiuchi, T.; Ikeda, K.-I.; Miura, S.; Stein, F.: Evaluation of Hardness before and after Compression Test of Nb2Co7 Single-phase Alloy by Nanoindentation Test. JIM (Japanese Institute of Metals) Meeting, ePoster, online (2021)
Distl, B.; Palm, M.; Stein, F.; Rackel, M. W.; Hauschildt, K.; Pyczak, F.: Phase equilibria investigations in the ternary Ti–Al–Nb system at elevated temperatures. Intermetallics 2019, Bad Staffelstein, Germany (2019)
Kahrobaee, Z.; Stein, F.; Palm, M.: Experimental evaluation of the isothermal section of the Ti–Al–Zr ternary system at 1273 K. Intermetallics 2019, Bad Staffelstein, Germany (2019)
Merali, M.; Stein, F.: Phase Relations in the Co-rich Part of the Co–Ti System including the Coexisting C36 and C15 Laves Phases. International Workshop on Laves Phases, Düsseldorf, Germany (2019)
Yamada, K.; Horiuchi, T.; Stein, F.; Miura, S.: Effect of Metastable L12-Co3Nb on Precipitation of Intermetallic Phases from Nb-Supersaturated Co Solid Solution in Co-rich Co-Nb Binary Alloys. 6th Int. Indentation Workshop, IIW6, Sapporo, Japan (2018)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Composition dependence of mechanical properties of cubic and hexagonal NbCo2 Laves phases. EMMC 16, European Mechanics of Material Conference, Nantes, France (2018)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Micropillar Compression of Hexagonal and Cubic NbCo2 Laves Phases. Nanomechanical Testing in Materials Research and Development VI, Dubrovnik, Croatia (2017)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Deformation of Micropillars of Cubic and Hexagonal NbCo2 Laves Phases under Uniaxial Compression at Room Temperature. Intermetallics 2017, Educational Center Kloster Banz, Bad Staffelstein, Germany (2017)
Abe , K.; Horiuchi, T.; Stein, F.; Taniguchi, S.: Interrelation between Crystal Structure of Co Solid Solution Matrix and Precipitation of Intermetallic Phases in Co-rich Co–Nb Alloys. Calphad XLV, Awaji Island, Hyogo, Japan (2016)
Li, X.; Bottler, F.; Spatschek, R. P.; Scherf, A.; Heilmaier, M.; Stein, F.: Novel Lamellar in situ Composite Materials in the Al-Rich Part of the Fe-Al System. Int. Conf. The Materials Chain: From Discovery to Production, University Bochum, Bochum, Germany (2016)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: A New Method to Study the Composition Dependence of Mechanical Properties of Intermetallic Phases. Int. Conf. The Materials Chain: From Discovery to Production, University Bochum, Bochum, Germany (2016)
Horiuchi, T.; Stein, F.: Precipitation Behavior of Co7Nb2 from Supersaturated Co Solid Solution in Co–Nb Binary System. Intermetallics 2015, Educational Center Kloster Banz, Bad Staffelstein, Germany (2015)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: A New Method to Study the Composition Dependence of Mechanical Properties of Laves Phases. Intermetallics 2015, Educational Center Kloster Banz, Bad Staffelstein, Germany (2015)
Stein, F.; Vogel, S. C.; Eumann, M.; Palm, M.: In-situ Neutron Diffraction Experiments on the Effect of Mo on the Structure of the High-Temperature ε Phase of the Fe–Al System. 5th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys (FEAL 2009), Prague, Czech Republic (2009)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
The aim of the work is to develop instrumentation, methodology and protocols to extract the dynamic strength and hardness of micro-/nano- scale materials at high strain rates using an in situ nanomechanical tester capable of indentation up to constant strain rates of up to 100000 s−1.
In this project, we investigate a high angle grain boundary in elemental copper on the atomic scale which shows an alternating pattern of two different grain boundary phases. This work provides unprecedented views into the intrinsic mechanisms of GB phase transitions in simple elemental metals and opens entirely novel possibilities to kinetically engineer interfacial properties.
Within this project, we will use an infra-red laser beam source based selective powder melting to fabricate copper alloy (CuCrZr) architectures. The focus will be on identifying the process parameter-microstructure-mechanical property relationships in 3-dimensional CuCrZr alloy lattice architectures, under both quasi-static and dynamic loading…
Copper is widely used in micro- and nanoelectronics devices as interconnects and conductive layers due to good electric and mechanical properties. But especially the mechanical properties degrade significantly at elevated temperatures during operating conditions due to segregation of contamination elements to the grain boundaries where they cause…