Valtiner, M.; Borodin, S.; Grundmeier, G.: Stabilisation and acidic dissolution mechanism of single crystalline ZnO(0001) surfaces in electrolytes studied by in-situ AFM imaging and ex-situ LEED. Langmuir 24 (10), pp. 5350 - 5358 (2008)
Wapner, K.; Stratmann, M.; Grundmeier, G.: Structure and stability of adhesion promoting aminopropyl phosphonate layers at polymer/aluminium oxide interface. International Journal of Adhesion and Adhesives 28 (1-2), pp. 59 - 70 (2008)
Wielant, J.; Posner, R.; Grundmeier, G.; Terryn, H.: Interface dipoles observed after adsorption of model compounds on iron oxide films: Effect of organic functionality and oxide surface chemistry. Journal of Physical Chemistry C 112, pp. 12951 - 12957 (2008)
Giza, G.; Fink, N.; Grundmeier, G.: Electrochemical studies of the inhibition of the cathodic delamination of organically coated galvanised steel by thin conversion films. Electrochimica Acta 53 (3), pp. 1290 - 1299 (2007)
Itani, H.; Keil, P.; Haake, U.; Lützenkirchen-Hecht, D.; Grundmeier, G.: Formation of Ag nanoparticles in LbL deposited polyelectrolyte films investigated by means of XAS and UV-Vis spectroscopy. HASYLAB Annual Report, p. 581 - 581 (2007)
Valtiner, M.; Borodin, S.; Grundmeier, G.: Preparation and characterisation of hydroxide stabilised ZnO(0001)-Zn-OH surfaces. Physical Chemistry Chemical Physics 9 (19), pp. 2406 - 2412 (2007)
Vlasak, R.; Klueppel, I.; Grundmeier, G.: Combined EIS and FTIR-ATR study of water uptake and diffusion in polymer films on semiconducting electrodes. Electrochim. Acta 52 (28), pp. 8075 - 8080 (2007)
Yliniemi, K.; Ebbinghaus, P.; Keil, P.; Kontturi, K.; Grundmeier, G.: Chemical composition and barrier properties of Ag nanoparticle-containing sol-gel films in oxidizing and reducing low-temperature plasmas. Surface & Coatings Technology 201 (18), pp. 7865 - 7872 (2007)
Wapner, K.; Stratmann, M.; Grundmeier, G.: In-situ Infrared Spectroscopic and Scanning Kelvin Probe Measurements of Water and Ion Transport Kinetics at Polymer/Metal Interfaces. Electrochimica Acta 51 (16), pp. 3303 - 3315 (2006)
Wilson, B. P.; Fink, N.; Grundmeier, G.: Formation of ultra-thin amorphous conversion films on zinc alloy coatings. Part 2: Nucleation, growth and properties of inorganic-organic ultra-thin hybrid films. Electrochimica Acta 51 (15), pp. 3066 - 3075 (2006)
Fink, N.; Wilson, B. P.; Grundmeier, G.: Formation of ultra-thin amorphous conversion films on zinc alloy coatings. Part 1: Composition and reactivity of native oxides on ZnAl(0.05%)-coatings. Electrochimica Acta 51 (14), pp. 2956 - 2963 (2006)
Grundmeier, G.; Rossenbeck, B.; Roschmann, K. J.; Ebbinghaus, P.; Stratmann, M.: Corrosion Protection of Zn-Phosphate Containing Water Borne Dispersion Coatings on Steel. Part 2: Corrosive de-adhesion of model films on iron substrates. Corrosion Science 48 (11), pp. 3716 - 3730 (2006)
Rossenbeck, B.; Ebbinghaus, P.; Stratmann, M.; Grundmeier, G.: Corrosion protection of Zn-phosphate containing water borne dispersion coatings on steel. Part 1: Design and Analysis of Model Water Based Latex Films on Iron Substrates. Corrosion Science 48, pp. 3703 - 3715 (2006)
Sun, G.; Grundmeier, G.: Surface-enhanced Raman spectroscopy of the growth of ultra-thin organosilicon plasma polymers on nanoporous Ag/SiO2-bilayer films. Thin Solid Films 515 (4), pp. 1266 - 1274 (2006)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Many important phenomena occurring in polycrystalline materials under large plastic strain, like microstructure, deformation localization and in-grain texture evolution can be predicted by high-resolution modeling of crystals. Unfortunately, the simulation mesh gets distorted during the deformation because of the heterogeneity of the plastic…
About 90% of all mechanical service failures are caused by fatigue. Avoiding fatigue failure requires addressing the wide knowledge gap regarding the micromechanical processes governing damage under cyclic loading, which may be fundamentally different from that under static loading. This is particularly true for deformation-induced martensitic…
Conventional alloy development methodologies which specify a single base element and several alloying elements have been unable to introduce new alloys at an acceptable rate for the increasingly specialised application requirements of modern technologies. An alternative alloy development strategy searches the previously unexplored central regions…
The full potential of energy materials can only be exploited if the interplay between mechanics and chemistry at the interfaces is well known. This leads to more sustainable and efficient energy solutions.