Auinger, M.: High Temperature Corrosion in Low Activity Gases - Theoretical Calculations and Experimental Comparison of Oxide, Nitride and Carbide Formation. Gordon Research Seminar on High Temperature Corrosion, New London, CT, USA (2013)
Auinger, M.: Phase Diagrams with FACTSage - Speaking different Languages for Thermochemical Properties. GTT-Workshop on Thermodynamic Simulations in Industry, Herzogenrath, Aachen, Germany (2013)
Auinger, M.: Internal oxidation and nitridation of hot rolled steels - A theoretical study and its experimental verification. Gunnar Eriksson Symposium & GTT-Workshop on Thermodynamic Simulations in Industry, Herzogenrath, Germany (2012)
Auinger, M.: What do we know about internal oxidation in hot-rolled steels? - A theoretical study and its experimental verification. Seminar Talk at Interdisciplinary Center for Advanced materials Simulation (ICAMS), Ruhr-Universtät Bochum, Bochum, Germany (2012)
Auinger, M.: Experimental studies and theoretical calculations on the formation of nitrides and oxides during selective oxidation in binary iron-alloys. 8th International Symposium on High-Temperature Corrosion and Protection of Materials, Les Embiez, France (2012)
Auinger, M.: Applied Simulations of Thermodynamic Reactions and Interphase Diffusion (ASTRID): Vorstellung des Konzepts und Beispiele zur Korngrenzenoxidation. CDL-Workshop Strukturmodellierung in technischen Metallen, Rust, Austria (2012)
Auinger, M.: Theory and Experiment for High Temperature Metal-Gas Reactions. Seminar Talk at Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA, USA (2011)
Auinger, M.; Rohwerder, M.: Connecting Thermochemical Reactions and Diffusion - The Formation of Grain Boundary Oxides in Steel Sheets. 18th Conference on Computer Methods in Materials Technology, Zakopane, Poland (2011)
Evers, S.; Borodin, S.; Auinger, M.; Rohwerder, M.: Understanding of Hydrogen in Steel by Scanning Kelvin Probe measurements on evaporated Pd-Films. 7th International Conference on Diffusion in Solids and Liquids (DSL 2011), Algarve, Portugal (2011)
Auinger, M.: Coupling Thermodynamics and Diffusion for describing Metal/Gas Reactions at elevated Temperatures. Lecture at Institute for Materials Research, Tohoku University, Sendai, Japan (2010)
Auinger, M.; Rohwerder, M.: Grain Boundary Oxidation Processes and High Temperature Corrosion. Division of Materials and Manufacturing Science, Osaka University, Osaka, Japan (2010)
Auinger, M.; Borodin, S.; Evers, S.; Rohwerder, M.: Thermodynamic Studies of Hydrogen Permeation and the Effect of Oxide Formation in Pure Iron Samples. 6th International Conference on Diffusion in Solids and Liquids, Paris, France (2010)
Auinger, M.; Rohwerder, M.: Grain Boundary Oxidation Processes and High Temperature Corrosion. GTT-Workshop on Thermodynamic Simulations in Industry, Herzogenrath, Aachen, Germany (2010)
Auinger, M.; Borodin, S.; Swaminathan, S.; Rohwerder, M.: Thermodynamic Simulations of the Oxidation Processes in Polycrystalline Metallic Alloys. International Workshop “Grain boundary diffusion, stresses and segregation”, Moscow, Russia (2010)
Auinger, M.; Borodin, S.; Swaminathan, S.; Rohwerder, M.: Thermodynamic Stability and Reaction Sequence for High Temperature Oxidation Processes in Steels. International Symposium “High Temperature Oxidation and Corrosion”, Zushi (Tokyo), Japan (2010)
Auinger, M.; Vogel, A.; Rohwerder, M.: High Temperature Corrosion in low-activity gases - Theoretical Calculations and Experimental Comparison of Oxide, Nitride and Carbide Formation. Gordon Research Seminar on High Temperature Corrosion, New London, CT, USA (2013)
In this project, we work on the use of a combinatorial experimental approach to design advanced multicomponent multi-functional alloys with rapid alloy prototyping. We use rapid alloy prototyping to investigate five multicomponent Invar alloys with 5 at.% addition of Al, Cr, Cu, Mn and Si to a super Invar alloy (Fe63Ni32Co5; at.%), respectively…
The aim of the current study is to investigate electrochemical corrosion mechanisms by examining the metal-liquid nanointerfaces. To achieve this, corrosive fluids will be strategically trapped within metal structures using novel additive micro fabrication techniques. Subsequently, the nanointerfaces will be analyzed using cryo-atom probe…
We have studied a nanocrystalline AlCrCuFeNiZn high-entropy alloy synthesized by ball milling followed by hot compaction at 600°C for 15 min at 650 MPa. X-ray diffraction reveals that the mechanically alloyed powder consists of a solid-solution body-centered cubic (bcc) matrix containing 12 vol.% face-centered cubic (fcc) phase. After hot compaction, it consists of 60 vol.% bcc and 40 vol.% fcc. Composition analysis by atom probe tomography shows that the material is not a homogeneous fcc–bcc solid solution
Magnetic properties of magnetocaloric materials is of utmost importance for their functional applications. In this project, we study the magnetic properties of different materials with the final goal to discover new magnetocaloric materials more suited for practical applications.
Laser Powder Bed Fusion (LPBF) is the most commonly used Additive Manufacturing processes. One of its biggest advantages it offers is to exploit its inherent specific process characteristics, namely the decoupling the solidification rate from the parts´volume, for novel materials with superior physical and mechanical properties. One prominet…
The aim of the Additive micromanufacturing (AMMicro) project is to fabricate advanced multimaterial/multiphase MEMS devices with superior impact-resistance and self-damage sensing mechanisms.
In this project we pursue recent developments in the field of austenitic steels with up to 18% reduced mass density. The alloys are based on the Fe-Mn-Al-C system.
Local lattice distortion is one of the core effects in complex concentrated alloys (CCAs). It has been expected that the strength CCAs can be improved by inducing larger local lattice distortions. In collaboration with experimentalists, we demonstrated that VCoNi has larger local lattice distortions and indeed has much better strength than the…