Wicinski, M.; Hassel, A. W.; Stratmann, M.: Corrosion under Cyclic Conditions Monitored by a Simultaneous Scanning Kelvin Probe and Galvanic Current Measurement. 55rd Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)
Hassel, A. W.; Schneider, A.: Preparation and Characterisation of Rhenium Nano Electrode arrays. International Society of Electrochemistry, 2nd Spring meeting, Xiamen, China (2004)
Hassel, A. W.; Akiyama, E.; Smith, A.; Tan, K. S.; Stratmann, M.: Dynamic and Quasi Static Particle Impingement in Flow Corrosion. COST F2 2nd Workshop „Local Flow Effects in Hydrodynamic Systems”, Paris, France (2003)
Stratmann, M.; Hassel, A. W.; Spiegel, M.: Spektroskopische und reaktionskinetische Methoden zur Charakterisierung der Struktur, Eigenschaften und Stabilität von Metalloberflächen. 21. Vortrags- und Diskussionstagung Werkstoffprüfung 2003, Bad Neuenahr, Germany (2003)
Akiyama, E.; Hassel, A. W.; Stratmann, M.: A study of current transients caused by single particle impact on electrodes. 13th Asian Pacific Corrosion Control Conference, Osaka, Japan (2003)
Fushimi, K.; Hassel, A. W.; Stratmann, M.: Passive Film Formed on Shape Memory NiTi-Alloy in Sulfuric Acid. 13th Asian Pacific Corrosion Control Conference, Osaka, Japan (2003)
Hassel, A. W.; Akiyama, E.; Smith, A.; Tan, K. S.; Stratmann, M.: Dynamic and Quasi Static Particle Impingement in Flow Corrosion. Seminar an der Graduate School of Engineering der Universität von Hokkaido, Sapporo, Japan (2003)
Hassel, A. W.; Bonk, S.; Wicinski, M.; Stratmann, M.: Corrosion of zinc coated steel sheets under cyclic corrosion conditions. 13th Asian Pacific Corrosion Control Conference, Osaka, Japan (2003)
Tsuri, S.; Hassel, A. W.; Stratmann, M.: Electrochemical Behaviour of Low Alloy Steels during Atmospheric Corrosion. 13th Asian Pacific Corrosion Control Conference, Osaka, Japan (2003)
Akiyama, E.; Hassel, A. W.; Stratmann, M.: Measurements of electrochemical responses caused by a single particle impact in slurry impingement. 50th Zairyo-to-Kankyo Meeting, Okinawa, Japan (2003)
Bonk, S.; Tsuri, S.; Hassel, A. W.; Stratmann, M.: Construction of a cyclic corrosion test simulator. GDCH Jahrestagung 2003, Fachgruppe Angewandte Elektrochemie mit 8. Grundlagensymposium der GDCh, DECHEMA, DBG, München, Germany (2003)
Wicinski, M.; Hassel, A. W.; Stratmann, M.: Investigation of spatiotemporal potential and current distribution in microscopic corrosion cell. GDCH Jahrestagung 2003, Fachgruppe Angewandte Elektrochemie mit 8. Grundlagensymposium der GDCh, DECHEMA, DBG, München, Germany (2003)
Hassel, A. W.; Fushimi, K.; Stratmann, M.: Elektropolieren und Anodisieren von Nitinol. Institutsseminar des Lehrstuhls für Werkstoffe Ruhr-Universität Bochum Prof. Pohl, Bochum, Germany (2003)
Fushimi, K.; Hassel, A. W.; Stratmann, M.: Study on Electropolishing Behavior of Shape Memory NiTi-Alloy. 108th Meeting of The Surface Finishing Society of Japan, Utsunomiya, Japan (2003)
Bonk, S.; Wicinski, M.; Hassel, A. W.; Stratmann, M.: Sensitivity of pure zinc and zinc-alloyed steel sheets to pH-changes in alkaline electrolyte. Electrochem 2003, Southhampton, UK (2003)
Hydrogen in aluminium can cause embrittlement and critical failure. However, the behaviour of hydrogen in aluminium was not yet understood. Scientists at the Max-Planck-Institut für Eisenforschung were able to locate hydrogen inside aluminium’s microstructure and designed strategies to trap the hydrogen atoms inside the microstructure. This can…
Hydrogen embrittlement affects high-strength ferrite/martensite dual-phase (DP) steels. The associated micromechanisms which lead to failure have not been fully clarified yet. Here we present a quantitative micromechanical analysis of the microstructural damage phenomena in a model DP steel in the presence of hydrogen.
This project will aim at developing MEMS based nanoforce sensors with capacitive sensing capabilities. The nanoforce sensors will be further incorporated with in situ SEM and TEM small scale testing systems, for allowing simultaneous visualization of the deformation process during mechanical tests
The project aims to study corrosion, a detrimental process with an enormous impact on global economy, by combining denstiy-functional theory calculations with thermodynamic concepts.
Understanding hydrogen-assisted embrittlement of advanced structural materials is essential for enabling future hydrogen-based energy industries. A crucially important phenomenon in this context is the delayed fracture in high-strength structural materials. Factors affecting the hydrogen embrittlement are the hydrogen content,...
Thermo-chemo-mechanical interactions due to thermally activated and/or mechanically induced processes govern the constitutive behaviour of metallic alloys during production and in service. Understanding these mechanisms and their influence on the material behaviour is of very high relevance for designing new alloys and corresponding…
Nickel-based alloys are a particularly interesting class of materials due to their specific properties such as high-temperature strength, low-temperature ductility and toughness, oxidation resistance, hot-corrosion resistance, and weldability, becoming potential candidates for high-performance components that require corrosion resistance and good…
Understanding hydrogen-assisted embrittlement of advanced high-strength steels is decisive for their application in automotive industry. Ab initio simulations have been employed in studying the hydrogen trapping of Cr/Mn containing iron carbides and the implication for hydrogen embrittlement.