Genchev, G.; Cox, K.; Tran, T. H.; Sarfraz, A.; Bosch, C.; Spiegel, M.; Erbe, A.: Metallic, oxygen-containing reaction products after polarisation of iron in H₂S saturated saline solutions. Corrosion Science 98, pp. 725 - 736 (2015)

Auinger, M.; Vogel, D.; Vogel, A.; Spiegel, M.; Rohwerder, M.: A novel laboratory set-up for investigating surface and interface reactions during short term annealing cycles at high temperatures. Review of Scientific Instruments 84, 085108 (2013)

Swaminathan, S.; Rohwerder, M.; Rohwerder, M.; Spiegel, M.: Temperature and dew point dependent segregation of phosphorus and sulfur in Fe–Mn–P–S model alloy. Surface and Coatings Technology 205 (16), pp. 4089 - 4093 (2011)

Neelakantan, L.; Swaminathan, S.; Spiegel, M.; Eggeler, G.; Hassel, A. W.: Selective surface oxidation and nitridation of NiTi shape memory alloys by reduction annealing. CoRR. Sci. 51, pp. 635 - 641 (2009)

Asteman, H.; Spiegel, M.: A comparison of the oxidation behaviours of Al₂O₃ formers and Cr₂O₃ formers at 700 °C - Oxide solid solutions acting as a template for nucleation. Corrosion Science 50 (6), pp. 1734 - 1743 (2008)

Swaminathan, S.; Spiegel, M.: Effect of alloy composition on the selective oxidation of ternary Fe–Si–Cr, Fe–Mn–Cr model alloys. Surface and Interface Analysis 40 (3-4), pp. 268 - 272 (2008)

Hassel, A. W.; Neelakantan, L.; Zelenkevych, A.; Ruh, A.; Spiegel, M.: Selective dealloying of NiTi by oxochloridation. Corr. Sci. 50, pp. 1368 - 1375 (2008)

Mardare, C. C.; Spiegel, M.; Savan, A.; Ludwig, A.: Investigation of thin coatings from Mn–Co system deposited by PVD on metallic interconnects for SOFC Applications. Material Science Forum 595-598, pp. 797 - 804 (2008)

Swaminathan, S.; Koll, T.; Pohl, M.; Wieck, A. D.; Spiegel, M.: Hot-dip galvanizing simulation of model alloys and industrial steel grades: Correlation between surface chemistry and wettability. Steel Res. Int. 79 (1), pp. 66 - 72 (2008)

Asteman, H.; Spiegel, M.: Investigation of the HCl (g) attack on pre-oxidized pure Fe, Cr, Ni and commercial 304 steel at 400 °C. Corrosion Science 49 (9), pp. 3626 - 3637 (2007)

Li, Y. S.; Niu, Y.; Spiegel, M.: High temperature interaction of Al/Si-modified Fe–Cr alloys with KCl. Corrosion Science 49 (4), pp. 1799 - 1815 (2007)

Bernst, R.; Schneider, A.; Spiegel, M.: Metal dusting of binary iron aluminium alloys at 600 °C. Materials and Corrosion 57, 9, pp. 724 - 728 (2006)

Cha, S. C.; Spiegel, M.: Local reactions of KCl particles with iron, nickel and chromium surfaces. Mater. and Corr. 57, pp. 159 - 164 (2006)

Cvijovic, I.; Parezanovic, I.; Spiegel, M.: Influence of N₂–H₂ atmosphere composition and annealing duration on the selective surface oxidation of low carbon steels. Corrion Science 48, pp. 980 - 993 (2006)

Cvijovic, I.; Parezanovic, I.; Spiegel, M.: The effect of dual phase steel surface roughness on selective oxidation and surface wettability. Kovove Mater. 44, pp. 35 - 39 (2006)

Krywka, C.; Paulus, M.; Sternemann, C.; Volmer, M.; Remhof, A.; Nowak, G.; Nefedov, A.; Pöter, B.; Spiegel, M.; Tolan, M.: Surface X-ray diffraction at beamline BL 9 of Delta. Journal of Synchrotron Radiation 13, pp. 8 - 13 (2006)

Ruh, A.; Spiegel, M.: Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl-ZnCl2 micture. Corr.Sci. 48, pp. 679 - 695 (2006)

Ruh, A.; Spiegel, M.: Influence of gas phase composition on the kinetics of chloride melt induced corrosion of pure iron. Mater. and Corr. 57, pp. 237 - 243 (2006)

Sánchez Pastén, M.; Spiegel, M.: High temperature corrosion of metallic materials in simulated waste incineration environments at 300-600 °C. Mater. and Corr. 57, pp. 192 - 195 (2006)

Li, Y. S.; Spiegel, M.; Shimada, S.: Corrosion behaviour of model alloys with NaCl–KCl coating. Materials Chemistry and Physics 93 (1), p. 217 - 217 (2005)