Pérez Escobar, D.; Duprez, L.; Verbeken, K.; Verhaege, M.: Study of the hydrogen traps in a high strength TRIP steel by Thermal Desorption Spectroscopy. Materials Science Forum 706-709, pp. 2253 - 2258 (2012)
Pérez Escobar, D.; Verbeken, K.; Duprez, L.; Verhaege, M.: On the methodology of Thermal Desorption Spectroscopy to evaluate hydrogen embrittlement. Materials Science Forum 706-709, pp. 2354 - 2359 (2012)
Verbeken, K.; Vervynckt, S.; Thibaux, P.; Houbaert, Y.: Empirical relationships for the impact of Nb and C content on the mechanical properties of hot rolled microalloyed steels. Materials Science Forum 706-709, pp. 37 - 42 (2012)
Vervynckt, S.; Thibaux, P.; Verbeken, K.: Effect of recrystallization controlled rolling on the microstructure and mechanical properties of hot rolled niobium microalloyed steels. Metals and Materials International 18, pp. 37 - 46 (2012)
Danzo, I.; Verbeken, K.; Houbaert, Y.: Characterization of the Intermetallic Compounds Formed during Hot Dipping of Electrical Steel in a Hypo-Eutectic Al–Si Bath. Defect and Diffusion Forum 297 - 301, pp. 370 - 375 (2010)
De Clercq, J.; Van de Steene, E.; Verbeken, K.; Verhaege, M.: Electrochemical oxidation of 1,4-dioxane at boron-doped diamond electrode. Journal of Chemical Technology & Biotechnology 88 (8), pp. 1162 - 1167 (2010)
De Muynck, W.; Verbeken, K.; De Belie, N.; Verstraete, W.: Influence of urea and calcium dosage on the effectiveness of bacterially induced carbonate precipitation on limestone. BioGeoCivil Engineering, pp. 99 - 111 (2010)
Gomes, E.; Schneider, J.; Verbeken, K.; Hermann, H.; Houbaert, Y.: Effect of hot and cold rolling on grain size and texture in Fe–Si strips with Si-content larger than 2 wt%. Materials Science Forum 638-642, pp. 3561 - 3566 (2010)
Gomes, E.; Schneider, J.; Verbeken, K.; Pasquarella, G.; Houbaert, Y.: Dimensional effects on magnetic properties of Fe–Si steels due to laser and mechanical cutting. IEEE Transactions on Magnetics 46 (2), pp. 213 - 216 (2010)
Hennebel, T.; De Corte, S.; Vanhaecke, L.; Vanherck, K.; Forrez, I.; De Gusseme, B.; Verhagen, P.; Verbeken, K.; Van der Bruggen, B.; Vankelecom, I.et al.; Boon, N.; Verstraete, W.: Removal of diatrizoate with catalytically active membranes incorporating microbially produced palladium nanoparticles. Water Research 44 (5), pp. 1498 - 1506 (2010)
Petrov, R.; Verbeken, K.; Bouquerel, J.; Verleysen, P.; Kestens, L.; Houbaert, Y.: OIM analysis of microstructure and texture of a TRIP assisted steel after static and dynamic deformation. Materials Science Forum 638-642, pp. 3447 - 3452 (2010)
Verbeken, K.; Gomes, E.; Schneider, J.; Houbaert, Y.: Correlation between the magnetic properties and the crystallographic texture during the processing of non oriented electrical steel. Solid State Phenomena 160, pp. 189 - 194 (2010)
Vervynck, S.; Verbeken, K.; Thibaux, P.; Houbaert, Y.: Characterization of the austenite recrystallization by comparing double deformation and stress relaxation tests. Steel Research International 81 (3), pp. 234 - 244 (2010)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
In collaboration with Dr. Edgar Rauch, SIMAP laboratory, Grenoble, and Dr. Wolfgang Ludwig, MATEIS, INSA Lyon, we are developing a correlative scanning precession electron diffraction and atom probe tomography method to access the three-dimensional (3D) crystallographic character and compositional information of nanomaterials with unprecedented…
A high degree of configurational entropy is a key underlying assumption of many high entropy alloys (HEAs). However, for the vast majority of HEAs very little is known about the degree of short-range chemical order as well as potential decomposition. Recent studies for some prototypical face-centered cubic (fcc) HEAs such as CrCoNi showed that…
Atom probe tomography (APT) is a material analysis technique capable of 3D compositional mapping with sub-nanometer resolution. The specimens for APT are shaped as sharp needles (~100 nm radius at the apex), so as to reach the necessary intense electrostatic fields, and are typically prepared via focused ion beam (FIB) based milling.
About 90% of all mechanical service failures are caused by fatigue. Avoiding fatigue failure requires addressing the wide knowledge gap regarding the micromechanical processes governing damage under cyclic loading, which may be fundamentally different from that under static loading. This is particularly true for deformation-induced martensitic…
We simulate the ionization contrast in field ion microscopy arising from the electronic structure of the imaged surface. For this DFT calculations of the electrified surface are combined with the Tersoff-Hamann approximation to electron tunneling. The approach allows to explain the chemical contrast observed for NiRe alloys.
Electron channelling contrast imaging (ECCI) is a powerful technique for observation of extended crystal lattice defects (e.g. dislocations, stacking faults) with almost transmission electron microscopy (TEM) like appearance but on bulk samples in the scanning electron microscope (SEM).