Clemens, H.; Mayer, S.; Scheu, C.: Microstructure and Properties of Engineering Materials. In: Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications: Second Edition, pp. 3 - 20 (Eds. Schreyer, A.; Clemens, H.; Mayer, S.). wiley, Hoboken, NJ, USA (2017)
Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe (Materials Resaerch Symposium Proceedings, Phase Transformations and Systems Driven far from Equilibrium, 481). MRS Fall Meeting´97, Boston, MA, USA. (2001)
Hieke, S. W.; Willinger, M. G.; Wang, Z.-J.; Richter, G.; Dehm, G.; Scheu, C.: In situ electron microscopy – insights in solid state dewetting of epitaxial Al thin films on sapphire. In: Microscopy Conference 2017 (MC 2017) - Proceedings (Ed. Laue, M.). Microscopy Conference 2017 (MC 2017), Lausanne, Switzerland, August 21, 2017 - August 25, 2017. Universität Regensburg, Regensburg (2017)
Folger, A.; Wisnet, A.; Scheu, C.: Defects in as-grown vs. annealed rutile titania nanowires and their effect on properties. EMC 2016, 16th European Microscopy Congress, Lyon, France, August 28, 2016 - September 02, 2016. European Microscopy Congress 2016: Proceedings, pp. 409 - 410 (2016)
Hieke, S. W.; Dehm, G.; Scheu, C.: Investigation of solid state dewetting phenomena of epitaxial Al thin films on sapphire using electron microscopy. In: European Microscopy Congress 2016: Proceedings, pp. 203 - 204. The 16th European Microscopy Congress (EMC 2016), Lyon, France, August 28, 2016 - September 02, 2016. Wiley-VCH Verlag GmbH & Co KGaA (2016)
Cha, L.; Scheu, C.; Dehm, G.: A TEM study of ultra-fine lamellar structures in titanium aluminide. In: 9th Multinational Microscopy Conference 2009 Materials Science, Vol. 3, pp. 247 - 248 (Eds. Kothleitner, G.; Leisch, M.). 9th Multinational Microscopy Conference 2009, Graz, Austria, August 30, 2009 - September 04, 2009. Verlag der Technischen Universität Graz, Graz, Austria (2009)
Cha, L.; Scheu, C.; Dehm, G.; Schnitzer, R.; Clemens, H. J.: Initial stages of lamellae formation in high Nb containing γ-TiAl based alloys. In: Materials Research Society Symposium Proceedings 2009, Vol. 1128, pp. 153 - 158. MRS Fall Meeting 2009, Boston, MA, USA, November 30, 2009 - December 04, 2009. (2009)
Rester, M.; Cha, L.; Scheu, C.; Dehm, G.; Clemens, H. J.; Kothleitner, G.; Leisch, M.: Microstructure of a massively transformed high Nb containing γ-TiAl based alloy. In: 9th Multinational Microscopy Conference 2009, pp. 231 - 232 (Eds. Kothleitner, G.; Leisch, M.). 9th Multinational Microscopy Conference 2009, Graz, Austria, August 30, 2009. Verlag der Technischen Universität Graz, Graz, Austria (2009)
Rashkova, B.; Kothleitner, G.; Šturm, S.; Scheu, C.; Kutschej, K.; Mitterer, C.; Lazar, P.; Redinger, J.; Podloucky, R.; Dehm, G.: A Comparison of the Electronic Structure of N–K in TiN and VN using EELS and Ab-initio Calculations. In: Proceeding 33rd Microscopy Conference, Deutsche Gesellschaft für Elektronenmikroskopie, pp. 414 - 415. Microscopy 33rd Conference, Deutsche Gesellschaft für Elektronenmikroskopie, Saarbrücken, Germany, September 02, 2007 - September 07, 2007. (2007)
Wetscher, F.; Pippan, R.; Šturm, S.; Kauffmann, F.; Scheu, C.; Dehm, G.: Microstructural evolution of a pearlitic steel during severe plastic deformation. In: 7th Multinational Congress on Microscopy. 7th Multinational Congress on Microscopy, Portorož, Slovenia, June 26, 2005 - June 30, 2005. (2005)
Oh, S. H.; Scheu, C.; Dehm, G.; Wagner, T. A.; Rühle, M.; Lee, H. J.: Direct atomic scale observation of dynamic alumina-aluminum solid-liquid interfaces. In: The 8th Asia-Pacific Conference on Electron Microscopy (8APEM): In Conjunction with the 60th Annual Meeting of the Japanese Society of Microscopy, pp. 671 - 672. 8th Asia-Pacific Conference on Electron Microscopy (8APEM), Kanazawa, Japan, June 07, 2004 - June 11, 2004. Die Japanische Gesellschaft für Mikroskopie, Uchinada-mati (Isikawa-ken), Japan (2004)
Dehm, G.; Scheu, C.; Rühle, M.: Interface Structure of Epitaxial Cu Films on (0001) α-Al2O3. In: Proceedings of the 14th ICEM, Vol. 2, pp. 567 - 568. 11th International Congress on Electron Microscopy, Dublin, Ireland, August 26, 1996 - August 30, 1996. (1998)
Rühle, M.; Dehm, G.; Scheu, C.: Structure and Composition of Interfaces in Ceramics and Ceramic Composites. In: Proc. of the International Materials Symposium on Ceramic Microstructures: Controll at the Atomic Level, pp. 1 - 12 (Eds. Tomsia, A. P.; Glaeser, A.). International Materials Symposium on Ceramic Microstructures: Controll at the Atomic Level, Berkley, CA, USA, June 24, 1996 - June 27, 1996. Plenum Press, New York (1998)
Scheu, C.; Dehm, G.; Kaplan, W. D.; Vilela, D.; Claussen, N. E.: Microstructure of Nb Based Al2O3 Composites. In: Proc. of 56rd Annual Meeting of MSA, pp. 588 - 589. 56rd Meeting of the Microscopy Society of America, Atlanta, GA, USA, July 12, 1998 - July 16, 1998. (1998)
Dehm, G.; Scheu, C.; Bamberger, M. S.: Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe. In: Laser Materials Processing, Vol. 83a, pp. 128 - 137. International Congress on Applications of Lasers and Electro-Optics’97, San Diego, CA, USA, 1997. (1997)
Dehm, G.; Scheu, C.: Atomic Structure of Internal Cu/Al2O3 Interfaces. In: Proc. of 54th annual meeting of MSA, Vol. 3, pp. 686 - 687. 54th Meeting of the Microscopy Society of America, Minneapolis, MN, USA, August 11, 1996 - August 15, 1996. (1996)
Berova, V.; Garzón-Manjón, A.; Vega-Paredes, M.; Scheu, C.; Jurzinsky, T.: Influence of Shell Thickness on Durability of Ru@Pt Core-Shell Catalysts for Reformate PEM Fuel Cells. In ECS Meeting Abstracts, MA2022-01 (35), p. 1528. The Electrochemical Society (2022)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
Decarbonisation of the steel production to a hydrogen-based metallurgy is one of the key steps towards a sustainable economy. While still at the beginning of this transformation process, with multiple possible processing routes on different technological readiness, we conduct research into the related fundamental scientific questions at the MPIE.
Within this project, we will use an infra-red laser beam source based selective powder melting to fabricate copper alloy (CuCrZr) architectures. The focus will be on identifying the process parameter-microstructure-mechanical property relationships in 3-dimensional CuCrZr alloy lattice architectures, under both quasi-static and dynamic loading…
Here the focus lies on investigating the temperature dependent deformation of material interfaces down to the individual microstructural length-scales, such as grain/phase boundaries or hetero-interfaces, to understand brittle-ductile transitions in deformation and the role of chemistry or crystallography on it.
We simulate the ionization contrast in field ion microscopy arising from the electronic structure of the imaged surface. For this DFT calculations of the electrified surface are combined with the Tersoff-Hamann approximation to electron tunneling. The approach allows to explain the chemical contrast observed for NiRe alloys.
Magnetic materials enable the electrification of transport, communication, energy, and manufacturing. They serve for instance as hard magnets in electrical motors or as soft magnets in transformers. Their remanence, coercivity, and hysteresis losses determine the efficiency of devices that are urgently needed for enabling society and economy to use…
In this project we developed a phase-field model capable of describing multi-component and multi-sublattice ordered phases, by directly incorporating the compound energy CALPHAD formalism based on chemical potentials. We investigated the complex compositional pathway for the formation of the η-phase in Al-Zn-Mg-Cu alloys during commercial…