Vogel, D.; Renner, F. U.; Rohwerder, M.; Stratmann, M.: Novel setups pushing the limits of high-temperature reaction studies. Gordon Research Conference on High Temperature Corrosion, New London, NH, USA (2010)
Posner, R.; Wapner, K.; Stratmann, M.; Grundmeier, G.: Hydrated Ion Transport at Polymer/Oxide/Metal-Interfaces in Non-Corrosive Atmosphere: Influence of Electric Field Gradients. Gordon Conference Graduate Research Seminar on Aqueous Corrosion, Colby Sawyer College, New London, NH, USA (2008)
Venzlaff, H.; Enning, D. R.; Widdel, F.; Stratmann, M.; Hassel, A. W.: Microbial corrosion induced by a highly aggressive SRB strain. 2nd International IMPRS-SurMat Workshop on Surface and Interface Engineering in Advanced Materials, Bochum, Germany (2008)
Dönecke, K.; Hassel, A. W.; Stratmann, M.: Erosion-Corrosion and Repassivation of AISI 302 Stainless Steel in different Elec-trolytes after Multiple and Single Particle Impingements. 6th International Symposium on Electrochemical Micro & Nanosystem Technologies, Bonn, Germany (2006)
Lill, K. A.; Stratmann, M.; Frommeyer, G.; Hassel, A. W.: Investigations on anisotropy of nickelfree alloys with combined local and trace analysis. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Mingers, A. M.; Hassel, A. W.; Stratmann, M.; van der Heijden, M.: Korrosionsuntersuchungen an triboresistenten Höchstleistungsbeschichtungen. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Smith, A. J.; Hassel, A. W.; Stratmann, M.: In-situ Untersuchungen zur Winkelabhängigkeit von Einzelpartikeltreffern in der Partikelinduzierten Strömungskorrosion. GDCh, Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Yadav, A. P.; Manthey, A.; Hassel, A. W.; Stratmann, M.; Antonissen, J.: Effect of Small Compositional Changes on the Atmospheric Corrosion Behaviour of Weathering Steels. GDCh Jahrestagung 2005, Fachgruppe Angewandte Elektrochemie, Düsseldorf, Germany (2005)
Wapner, K.; Stratmann, M.; Grundmeier, G.: Non-destructive, In-Situ Measurement of De-Adhesion Processes at Buried Adhesive/Metal Interfaces by Means of a New Scanning Kelvin Probe Blister Test. EUROMAT 2005, Prague, Czech Republic (2005)
Smith, A.; Stratmann, M.; Hassel, A. W.: Detektion von Einzelpartikeltreffern durch Messung der Stromtransienten unter Tribokorrosionsbedingungen. Bunsentagung 2005, Frankfurt, Germany (2005)
Bonk, S.; Wicinski, M.; Hassel, A. W.; Stratmann, M.: Elektrochemische Untersuchungen verzinkter Stähle in alkalischer Sulfatlösung bei verschiedenen pH-Werten. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Lill, K. A.; Hassel, A. W.; Stratmann, M.: Korrosionsuntersuchungen auf einzelnen Körnern einer neuen Klasse ferritischer FeAlCr Leichtbaustähle. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Mingers, A. M.; Hassel, A. W.; Stratmann, M.; van der Heijden, M.: Korrosionsuntersuchungen an triboresistenten Höchstleistungsschichten. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Neelakantan, L.; Georgiou, M.; Stratmann, M.; Hassel, A. W.; Fushimi, K.: On the mechanism of electropolishing of NiTi shape memory alloys. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Smith, A. J.; Tan, K. S.; Stratmann, M.; Hassel, A. W.: Korrelation von “Jet impingement” und Mikroindentation Versuchen. 79. AGEF Seminar - 25 Jahre Elektrochemie in Düsseldorf, Düsseldorf, Germany (2004)
Satori, H.; Hassel, A. W.; Rohwerder, M.; Stratmann, M.: Finite Element Simulation of the Cathodic Delamination Process of Coatings on Metal Surfaces. 55th Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)
Smith, A.; Stratmann, M.; Hassel, A. W.: Repassivation Transients from Single Particle Impingement on Disk Shaped Micro-electrodes. 55th Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)
Tan, K. S.; Hassel, A. W.; Stratmann, M.: Micro-indenter for tribo-corrosion investigations. 5th European Symposium on Nanomechanical Testing, Hückelhoven, Germany (2004)
Baumert, B.; Stratmann, M.; Rohwerder, M.: Formability of Ultra-Thin Plasma-Polymer Films Deposited on Metal Sheet: Mesoscopic and Nanoscopic Aspects of Defect Formation. Symposium on Thin Films - Stresses and Mechanical Properties X held at the 2003 MRS Fall Meeting, Boston, MA, USA (2003)
Nickel-based alloys are a particularly interesting class of materials due to their specific properties such as high-temperature strength, low-temperature ductility and toughness, oxidation resistance, hot-corrosion resistance, and weldability, becoming potential candidates for high-performance components that require corrosion resistance and good…
In this project, we aim to enhance the mechanical properties of an equiatomic CoCrNi medium-entropy alloy (MEA) by interstitial alloying. Carbon and nitrogen with varying contents have been added into the face-centred cubic structured CoCrNi MEA.
The aim of this project is to correlate the point defect structure of Fe1-xO to its mechanical, electrical and catalytic properties. Systematic stoichiometric variation of magnetron-sputtered Fe1-xO thin films are investigated regarding structural analysis by transition electron microscopy (TEM) and spectroscopy methods, which can reveal the defect…
The aim of this project is to develop novel nanostructured Fe-Co-Ti-X (X = Si, Ge, Sn) compositionally complex alloys (CCAs) with adjustable magnetic properties by tailoring microstructure and phase constituents through compositional and process tuning. The key aspect of this work is to build a fundamental understanding of the correlation between…
In this project, we aim to achieve an atomic scale understanding about the structure and phase transformation process in the dual-phase high-entropy alloys (HEAs) with transformation induced plasticity (TRIP) effect. Aberration-corrected scanning transmission electron microscopy (TEM) techniques are being applied ...
Femtosecond laser pulse sequences offer a way to explore the ultrafast dynamics of charge density waves. Designing specific pulse sequences may allow us to guide the system's trajectory through the potential energy surface and achieve precise control over processes at surfaces.
In this project, links are being established between local chemical variation and the mechanical response of laser-processed metallic alloys and advanced materials.
In this project, we investigate the phase transformation and twinning mechanisms in a typical interstitial high-entropy alloy (iHEA) via in-situ and interrupted in-situ tensile testing ...