Dumont, M.; Borbély, A.; Sander, P. M.; Kostka, A.; Kaysser-Pyzalla, A. R.: Texture and nanostructure of Sauropod bones: Implications for biomechanics. 1st International symposium on paleohistology, Barcelona, Spain (2011)
Kostka, A.; Song, J.; Raabe, D.; Veehmayer, M.: Microstructure and properties of interfaces formed by explosion cladding of Ti-Steel. XXI Conference on Applied Crystallography, Zakopane, Poland (2009)
Dumont, M.; Kostka, A.; Sander, M.; Borbély, A.; Pyzalla, A. R.: Comparison of apatite crystallite sizes in sauropod and mammal fossil bones. 6th Bone diagenesis meeting, Poppelsdorfer Schloss, University of Bonn, Germany (2009)
Springer, H.; Kostka, A.: Verbinden von hochfestem Stahl mit einer Aluminiumlegierung durch Rührreibschweißen. 4. GKSS Workshop, Geesthacht, Germany (2009)
Kostka, A.: Microstructure of Dissimilar Al to Steel Friction Stir Welds. XIII International Conference on Electron Microscopy, Zakopane, Poland (2008)
Kostka, A.: Microstructure and Properties of Al to Steel Friction Stir Overlap Welds. 7th International Friction Stir Welding Symposium, Awaji Island, Japan (2008)
Kostka, A.: ESBD Microstructure and Material Flow Characterization of an AA6181-T4 Aluminium Alloy to DP600 High Steel Friction Stir Butt-joint Weld. 3rd FSW Modelling and Material Flow Seminar, Geesthacht, Germany (2008)
Coelho, R. S.; Kostka, A.; Sheikhi, S.; Kocak, M.; Dos Santos, J.; Pyzalla, A. R.: Charakterisierung der Mikrostruktur und Verformung in Mg-Mg-Laserschweißnähten und Al-Stahl-Reibrührschweißverbindungen. 54. Metallkunde-Kolloquium Werkstoffforschung, Lech / Österreich (2008)
Garcia, J.; Lammer, A.; Garcia, L. F.; Weber, S.; Kostka, A.; Pyzalla, A. R.: Investigations of Wear Mechanisms in Diamond Tools with Fe-Based Matrices Reinforced with WC-Co Particles. Intern. Symposium on Friction, Wear and Wear Protection, Aachen, Germany (2008)
Garcia, L. F.; Garcia, J.; Kostka, A.; Weber, S.; Lammer, A.: Wear Behaviour of Cooper-Iron-Cobalt Diamond Tool Bonding Matrices Reinforced with Hardmetal Granulates. 9th Intern. Conference on the Science of Hard Materials, Montego Bay, Jamaica (2008)
Coelho, R. S.; Kostka, A.; Sheikhi, S.; dos Santos, J.; Pyzalla, A. R.: Friction Stir Welding of ZStE340 High-strength Steel and AA6181-T4 Aluminium Alloy. SOLVSTIR - International Seminar on Friction Stir Welding of Steels, Geesthacht (2007)
Agudo, L.; Pinto, H.; Kostka, A.; Weber, S.; Wagner, J.; Arenholz, E.; Bruckner, J.; Pyzalla, A. R.: Study of Microstructure and Residual Stresses in Dissimilar Al/Steel Welds Produced by Cold Metal Transfer. MECASENS IV, Wien (2007)
Coelho, R. S.; Kostka, A.; Riekehr, S.; Kocak, M.; Pyzalla, A. R.: Microstructure and residual stress of Nd:YAG laser AZ31B butt welds. MECASENS IV, Wien, Austria (2007)
Agudo, L.; Kostka, A.; Weber, S.; Wagner, J.; Arenholz, E.; Bruckner, J.; Pyzalla, A. R.: Al/Steel welds: Fundamental investigation of intermetallic phases. 4th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, FeAl2007, Interlaken, Switzerland (2007)
We have studied a nanocrystalline AlCrCuFeNiZn high-entropy alloy synthesized by ball milling followed by hot compaction at 600°C for 15 min at 650 MPa. X-ray diffraction reveals that the mechanically alloyed powder consists of a solid-solution body-centered cubic (bcc) matrix containing 12 vol.% face-centered cubic (fcc) phase. After hot compaction, it consists of 60 vol.% bcc and 40 vol.% fcc. Composition analysis by atom probe tomography shows that the material is not a homogeneous fcc–bcc solid solution
Magnetic properties of magnetocaloric materials is of utmost importance for their functional applications. In this project, we study the magnetic properties of different materials with the final goal to discover new magnetocaloric materials more suited for practical applications.
Laser Powder Bed Fusion (LPBF) is the most commonly used Additive Manufacturing processes. One of its biggest advantages it offers is to exploit its inherent specific process characteristics, namely the decoupling the solidification rate from the parts´volume, for novel materials with superior physical and mechanical properties. One prominet…
The aim of the Additive micromanufacturing (AMMicro) project is to fabricate advanced multimaterial/multiphase MEMS devices with superior impact-resistance and self-damage sensing mechanisms.
In this project we pursue recent developments in the field of austenitic steels with up to 18% reduced mass density. The alloys are based on the Fe-Mn-Al-C system.
Local lattice distortion is one of the core effects in complex concentrated alloys (CCAs). It has been expected that the strength CCAs can be improved by inducing larger local lattice distortions. In collaboration with experimentalists, we demonstrated that VCoNi has larger local lattice distortions and indeed has much better strength than the…
This project is a joint project of the De Magnete group and the Atom Probe Tomography group, and was initiated by MPIE’s participation in the CRC TR 270 HOMMAGE. We also benefit from additional collaborations with the “Machine-learning based data extraction from APT” project and the Defect Chemistry and Spectroscopy group.
Statistical significance in materials science is a challenge that has been trying to overcome by miniaturization as in micropillar compression. However, this process is still limited to 4-5 tests per parameter variance, i.e. Size, orientation, grain size, composition, etc. as the process of fabricating pillars and testing has to be done one by one.…