Zambaldi, C.; Zaefferer, S.; Wright, S. I.: Determination of texture and microstructure of ordering domains in gamma-TiAl. Electron Backscatter Diffraction Meeting by the Royal Microscopical Society, University of Sheffield, Sheffield, UK (2008)
Zaefferer, S.; Romano, P.: Attempt to identify and quantify microstructural constituents in low-alloyed TRIP steels by simultaneous EBSD and EDS measurements. M&M 2007, Microscopy and Microanalysis 2007 Meeting, Ft. Lauderdale, FL, USA (2007)
Frommert, M.; Dorner, D.; Lahn, L.; Raabe, D.; Zaefferer, S.: 3D Investigation of Early Stages of Recrystallization in Deformed Goss-Oriented Fe3%Si Single Crystals. The Third International Conference on Recrystallization and Grain Growth ReX & GG III, Jeju Island, South Korea (2007)
Zaefferer, S.: Some ideas on the formation mechanisms and intensity of electron backscatter diffraction patterns. 14th Conference on Electron Backscatter Diffraction, New Lanark, Scotland, UK (2007)
Bastos, A.; Zaefferer, S.; Raabe, D.: 3 Dimensional EBSD study of the relationship between triple junctions and columnar grain in electrodeposited materials. Electron Back Scatter Diffraction Meeting 2007, New Lanark, Scotland, UK (2007)
Bastos da Silva, A. F.; Zaefferer, S.; Raabe, D.: Three Dimension Characterization of Electrodeposited Samples. MRS Fall Meeting, Boston, MA, USA (2005)
Dorner, D.; Zaefferer, S.: 3D reconstruction of an abnormally growing Goss grain in Fe3%Si by FIB serial sectioning and EBSD. DPG-Jahrestagung 2005, Berlin, Germany (2005)
Zaafarani, N.; Singh, R.; Zaefferer, S.; Roters, F.; Raabe, D.: 3D experimental investigation and crystal plasticity FEM simulation of the texture and microstructure below a nanoindent in a Cu-single crystal. 6th European Symposium on nano-mechanical Testing (Nanomech 6), Hückelhoven, Germany (2005)
Konrad, J.; Raabe, D.; Zaefferer, S.: Deformation Behavior of a Fe3Al Alloy During Thermomechanical Treatment. MRS Fall Meeting, Boston, MA, USA (2004)
Thomas, I.; Zaefferer, S.; Friedel, F.; Raabe, D.: Orientation dependent growth behaviour of subgrain structures in IF steel. 2nd International Joint Conference on Recrystallization and Grain Growth, Annecy, France (2004)
Konrad, J.; Raabe, D.; Zaefferer, S.: Nucleation Mechanisms of Recrystallization in Warm Rolled Fe3Al Base Alloys. Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, MPIE, Düsseldorf, Germany (2004)
Wöllmer, S.; Zaefferer, S.; Göken, M.; Mack, T.; Glatzel, U.: Characterization of phases of aluminized nickel base superalloys. Intern. Conf. on Strength of Materials (ICSMA 13), Budapest, Hungary (2003)
We have studied a nanocrystalline AlCrCuFeNiZn high-entropy alloy synthesized by ball milling followed by hot compaction at 600°C for 15 min at 650 MPa. X-ray diffraction reveals that the mechanically alloyed powder consists of a solid-solution body-centered cubic (bcc) matrix containing 12 vol.% face-centered cubic (fcc) phase. After hot compaction, it consists of 60 vol.% bcc and 40 vol.% fcc. Composition analysis by atom probe tomography shows that the material is not a homogeneous fcc–bcc solid solution
Magnetic properties of magnetocaloric materials is of utmost importance for their functional applications. In this project, we study the magnetic properties of different materials with the final goal to discover new magnetocaloric materials more suited for practical applications.
In this project, we work on a generic solution to design advanced high-entropy alloys (HEAs) with enhanced magnetic properties. By overturning the concept of stabilizing solid solutions in HEAs, we propose to render the massive solid solutions metastable and trigger spinodal decomposition. The motivation for starting from the HEA for this approach…
This study investigates the mechanical properties of liquid-encapsulated metallic microstructures created using a localized electrodeposition method. By encapsulating liquid within the complex metal microstructures, we explore how the liquid influences compressive and vibrational characteristics, particularly under varying temperatures and strain…
In this project we pursue recent developments in the field of austenitic steels with up to 18% reduced mass density. The alloys are based on the Fe-Mn-Al-C system.
Local lattice distortion is one of the core effects in complex concentrated alloys (CCAs). It has been expected that the strength CCAs can be improved by inducing larger local lattice distortions. In collaboration with experimentalists, we demonstrated that VCoNi has larger local lattice distortions and indeed has much better strength than the…
Laser Powder Bed Fusion (LPBF) is the most commonly used Additive Manufacturing processes. One of its biggest advantages it offers is to exploit its inherent specific process characteristics, namely the decoupling the solidification rate from the parts´volume, for novel materials with superior physical and mechanical properties. One prominet…
The aim of the current study is to investigate electrochemical corrosion mechanisms by examining the metal-liquid nanointerfaces. To achieve this, corrosive fluids will be strategically trapped within metal structures using novel additive micro fabrication techniques. Subsequently, the nanointerfaces will be analyzed using cryo-atom probe…