Yamaguchi, M.; Horiuchi, T.; Ikeda, K.-I.; Miura, S.; Stein, F.: Evaluation of Hardness before and after Compression Test of Nb2Co7 Single-phase Alloy by Nanoindentation Test. JIM (Japanese Institute of Metals) Meeting, ePoster, online (2021)
Distl, B.; Palm, M.; Stein, F.; Rackel, M. W.; Hauschildt, K.; Pyczak, F.: Phase equilibria investigations in the ternary Ti–Al–Nb system at elevated temperatures. Intermetallics 2019, Bad Staffelstein, Germany (2019)
Kahrobaee, Z.; Stein, F.; Palm, M.: Experimental evaluation of the isothermal section of the Ti–Al–Zr ternary system at 1273 K. Intermetallics 2019, Bad Staffelstein, Germany (2019)
Merali, M.; Stein, F.: Phase Relations in the Co-rich Part of the Co–Ti System including the Coexisting C36 and C15 Laves Phases. International Workshop on Laves Phases, Düsseldorf, Germany (2019)
Yamada, K.; Horiuchi, T.; Stein, F.; Miura, S.: Effect of Metastable L12-Co3Nb on Precipitation of Intermetallic Phases from Nb-Supersaturated Co Solid Solution in Co-rich Co-Nb Binary Alloys. 6th Int. Indentation Workshop, IIW6, Sapporo, Japan (2018)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Composition dependence of mechanical properties of cubic and hexagonal NbCo2 Laves phases. EMMC 16, European Mechanics of Material Conference, Nantes, France (2018)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Micropillar Compression of Hexagonal and Cubic NbCo2 Laves Phases. Nanomechanical Testing in Materials Research and Development VI, Dubrovnik, Croatia (2017)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Deformation of Micropillars of Cubic and Hexagonal NbCo2 Laves Phases under Uniaxial Compression at Room Temperature. Intermetallics 2017, Educational Center Kloster Banz, Bad Staffelstein, Germany (2017)
Abe , K.; Horiuchi, T.; Stein, F.; Taniguchi, S.: Interrelation between Crystal Structure of Co Solid Solution Matrix and Precipitation of Intermetallic Phases in Co-rich Co–Nb Alloys. Calphad XLV, Awaji Island, Hyogo, Japan (2016)
Li, X.; Bottler, F.; Spatschek, R. P.; Scherf, A.; Heilmaier, M.; Stein, F.: Novel Lamellar in situ Composite Materials in the Al-Rich Part of the Fe-Al System. Int. Conf. The Materials Chain: From Discovery to Production, University Bochum, Bochum, Germany (2016)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: A New Method to Study the Composition Dependence of Mechanical Properties of Intermetallic Phases. Int. Conf. The Materials Chain: From Discovery to Production, University Bochum, Bochum, Germany (2016)
Horiuchi, T.; Stein, F.: Precipitation Behavior of Co7Nb2 from Supersaturated Co Solid Solution in Co–Nb Binary System. Intermetallics 2015, Educational Center Kloster Banz, Bad Staffelstein, Germany (2015)
Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: A New Method to Study the Composition Dependence of Mechanical Properties of Laves Phases. Intermetallics 2015, Educational Center Kloster Banz, Bad Staffelstein, Germany (2015)
Stein, F.; Vogel, S. C.; Eumann, M.; Palm, M.: In-situ Neutron Diffraction Experiments on the Effect of Mo on the Structure of the High-Temperature ε Phase of the Fe–Al System. 5th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys (FEAL 2009), Prague, Czech Republic (2009)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Many important phenomena occurring in polycrystalline materials under large plastic strain, like microstructure, deformation localization and in-grain texture evolution can be predicted by high-resolution modeling of crystals. Unfortunately, the simulation mesh gets distorted during the deformation because of the heterogeneity of the plastic…
About 90% of all mechanical service failures are caused by fatigue. Avoiding fatigue failure requires addressing the wide knowledge gap regarding the micromechanical processes governing damage under cyclic loading, which may be fundamentally different from that under static loading. This is particularly true for deformation-induced martensitic…
With the support of DFG, in this project the interaction of H with mechanical, chemical and electrochemical properties in ferritic Fe-based alloys is investigated by the means of in-situ nanoindentation, which can characterize the mechanical behavior of independent features within a material upon the simultaneous charge of H.
The full potential of energy materials can only be exploited if the interplay between mechanics and chemistry at the interfaces is well known. This leads to more sustainable and efficient energy solutions.