Clemens, H.; Mayer, S.; Scheu, C.: Microstructure and Properties of Engineering Materials. In: Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications: Second Edition, pp. 3 - 20 (Eds. Schreyer, A.; Clemens, H.; Mayer, S.). wiley, Hoboken, NJ, USA (2017)
Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe (Materials Resaerch Symposium Proceedings, Phase Transformations and Systems Driven far from Equilibrium, 481). MRS Fall Meeting´97, Boston, MA, USA. (2001)
Hieke, S. W.; Willinger, M. G.; Wang, Z.-J.; Richter, G.; Dehm, G.; Scheu, C.: In situ electron microscopy – insights in solid state dewetting of epitaxial Al thin films on sapphire. In: Microscopy Conference 2017 (MC 2017) - Proceedings (Ed. Laue, M.). Microscopy Conference 2017 (MC 2017), Lausanne, Switzerland, August 21, 2017 - August 25, 2017. Universität Regensburg, Regensburg (2017)
Folger, A.; Wisnet, A.; Scheu, C.: Defects in as-grown vs. annealed rutile titania nanowires and their effect on properties. EMC 2016, 16th European Microscopy Congress, Lyon, France, August 28, 2016 - September 02, 2016. European Microscopy Congress 2016: Proceedings, pp. 409 - 410 (2016)
Hieke, S. W.; Dehm, G.; Scheu, C.: Investigation of solid state dewetting phenomena of epitaxial Al thin films on sapphire using electron microscopy. In: European Microscopy Congress 2016: Proceedings, pp. 203 - 204. The 16th European Microscopy Congress (EMC 2016), Lyon, France, August 28, 2016 - September 02, 2016. Wiley-VCH Verlag GmbH & Co KGaA (2016)
Cha, L.; Scheu, C.; Dehm, G.: A TEM study of ultra-fine lamellar structures in titanium aluminide. In: 9th Multinational Microscopy Conference 2009 Materials Science, Vol. 3, pp. 247 - 248 (Eds. Kothleitner, G.; Leisch, M.). 9th Multinational Microscopy Conference 2009, Graz, Austria, August 30, 2009 - September 04, 2009. Verlag der Technischen Universität Graz, Graz, Austria (2009)
Cha, L.; Scheu, C.; Dehm, G.; Schnitzer, R.; Clemens, H. J.: Initial stages of lamellae formation in high Nb containing γ-TiAl based alloys. In: Materials Research Society Symposium Proceedings 2009, Vol. 1128, pp. 153 - 158. MRS Fall Meeting 2009, Boston, MA, USA, November 30, 2009 - December 04, 2009. (2009)
Rester, M.; Cha, L.; Scheu, C.; Dehm, G.; Clemens, H. J.; Kothleitner, G.; Leisch, M.: Microstructure of a massively transformed high Nb containing γ-TiAl based alloy. In: 9th Multinational Microscopy Conference 2009, pp. 231 - 232 (Eds. Kothleitner, G.; Leisch, M.). 9th Multinational Microscopy Conference 2009, Graz, Austria, August 30, 2009. Verlag der Technischen Universität Graz, Graz, Austria (2009)
Rashkova, B.; Kothleitner, G.; Šturm, S.; Scheu, C.; Kutschej, K.; Mitterer, C.; Lazar, P.; Redinger, J.; Podloucky, R.; Dehm, G.: A Comparison of the Electronic Structure of N–K in TiN and VN using EELS and Ab-initio Calculations. In: Proceeding 33rd Microscopy Conference, Deutsche Gesellschaft für Elektronenmikroskopie, pp. 414 - 415. Microscopy 33rd Conference, Deutsche Gesellschaft für Elektronenmikroskopie, Saarbrücken, Germany, September 02, 2007 - September 07, 2007. (2007)
Wetscher, F.; Pippan, R.; Šturm, S.; Kauffmann, F.; Scheu, C.; Dehm, G.: Microstructural evolution of a pearlitic steel during severe plastic deformation. In: 7th Multinational Congress on Microscopy. 7th Multinational Congress on Microscopy, Portorož, Slovenia, June 26, 2005 - June 30, 2005. (2005)
Oh, S. H.; Scheu, C.; Dehm, G.; Wagner, T. A.; Rühle, M.; Lee, H. J.: Direct atomic scale observation of dynamic alumina-aluminum solid-liquid interfaces. In: The 8th Asia-Pacific Conference on Electron Microscopy (8APEM): In Conjunction with the 60th Annual Meeting of the Japanese Society of Microscopy, pp. 671 - 672. 8th Asia-Pacific Conference on Electron Microscopy (8APEM), Kanazawa, Japan, June 07, 2004 - June 11, 2004. Die Japanische Gesellschaft für Mikroskopie, Uchinada-mati (Isikawa-ken), Japan (2004)
Dehm, G.; Scheu, C.; Rühle, M.: Interface Structure of Epitaxial Cu Films on (0001) α-Al2O3. In: Proceedings of the 14th ICEM, Vol. 2, pp. 567 - 568. 11th International Congress on Electron Microscopy, Dublin, Ireland, August 26, 1996 - August 30, 1996. (1998)
Rühle, M.; Dehm, G.; Scheu, C.: Structure and Composition of Interfaces in Ceramics and Ceramic Composites. In: Proc. of the International Materials Symposium on Ceramic Microstructures: Controll at the Atomic Level, pp. 1 - 12 (Eds. Tomsia, A. P.; Glaeser, A.). International Materials Symposium on Ceramic Microstructures: Controll at the Atomic Level, Berkley, CA, USA, June 24, 1996 - June 27, 1996. Plenum Press, New York (1998)
Scheu, C.; Dehm, G.; Kaplan, W. D.; Vilela, D.; Claussen, N. E.: Microstructure of Nb Based Al2O3 Composites. In: Proc. of 56rd Annual Meeting of MSA, pp. 588 - 589. 56rd Meeting of the Microscopy Society of America, Atlanta, GA, USA, July 12, 1998 - July 16, 1998. (1998)
Dehm, G.; Scheu, C.; Bamberger, M. S.: Microstructure of Ni2B Laser-Induced Surface-Alloyed α-Fe. In: Laser Materials Processing, Vol. 83a, pp. 128 - 137. International Congress on Applications of Lasers and Electro-Optics’97, San Diego, CA, USA, 1997. (1997)
Dehm, G.; Scheu, C.: Atomic Structure of Internal Cu/Al2O3 Interfaces. In: Proc. of 54th annual meeting of MSA, Vol. 3, pp. 686 - 687. 54th Meeting of the Microscopy Society of America, Minneapolis, MN, USA, August 11, 1996 - August 15, 1996. (1996)
Berova, V.; Garzón-Manjón, A.; Vega-Paredes, M.; Scheu, C.; Jurzinsky, T.: Influence of Shell Thickness on Durability of Ru@Pt Core-Shell Catalysts for Reformate PEM Fuel Cells. In ECS Meeting Abstracts, MA2022-01 (35), p. 1528. The Electrochemical Society (2022)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
This project will aim at addressing the specific knowledge gap of experimental data on the mechanical behavior of microscale samples at ultra-short-time scales by the development of testing platforms capable of conducting quantitative micromechanical testing under extreme strain rates upto 10000/s and beyond.
The development of pyiron started in 2011 in the CM department to foster the implementation, rapid prototyping and application of the highly advanced fully ab initio simulation techniques developed by the department. The pyiron platform bundles the different steps occurring in a typical simulation life cycle in a single software platform and…
The project focuses on development and design of workflows, which enable advanced processing and analyses of various data obtained from different field ion emission microscope techniques such as field ion microscope (FIM), atom probe tomography (APT), electronic FIM (e-FIM) and time of flight enabled FIM (tof-FIM).
Smaller is stronger” is well known in micromechanics, but the properties far from the quasi-static regime and the nominal temperatures remain unexplored. This research will bridge this gap on how materials behave under the extreme conditions of strain rate and temperature, to enhance fundamental understanding of their deformation mechanisms. The…
The prediction of materials properties with ab initio based methods is a highly successful strategy in materials science. While the working horse density functional theory (DFT) was originally designed to describe the performance of materials in the ground state, the extension of these methods to finite temperatures has seen remarkable…
The aim of the work is to develop instrumentation, methodology and protocols to extract the dynamic strength and hardness of micro-/nano- scale materials at high strain rates using an in situ nanomechanical tester capable of indentation up to constant strain rates of up to 100000 s−1.