Godara, A.; Raabe, D.; Green, S.: The influence of sterilization processes on the micromechanical properties of carbon fiber reinforced PEEK composites for bone-implant applications. 2006 MRS Fall Conference, Boston, MA, USA (2006)
Ohsaki, S.; Raabe, D.; Hono, K.: On the Mechanism of Mechanical Mixing and Deformation-induced Amorphization in Heavily Drawn Cu-Nb-Ag in situ Composite Wires. MRS Fall Conference, Boston, MA, USA (2006)
Raabe, D.; Sander, B.; Friák, M.; Neugebauer, J.: Bottom up design of novel Titanium-based biomaterials through the combination of ab-initio simulations and experimental methods. Materials Research Society fall meeting, Boston, MA, USA (2006)
Sandim, M.; Stamopoulos, D.; Sandim, H.; Ghivelder, L.; Thilly, L.; Vidal, V.; Lecouturier, F.; Raabe, D.: Strain Effects on the Magnetic Properties of Cu-Nb Nanofilamentary Composites. MRS Fall Conference, Boston, MA, USA (2006)
Bieler, T. R.; Crimp, M. A.; Roters, F.; Raabe, D.: Computational modeling of TiAl microstructures which developed microcracked grain boundaries. Institut für Metallkunde und Metallphysik RWTH-Aachen, Aachen, Germany (2006)
Bieler, T. R.; Crimp, M. A.; Roters, F.; Raabe, D.: Computational modeling of grain boundary microcrack nucleation using a slip interaction based definition of boundary character. Risø National Laboratories, Roskilde, Denmark (2006)
Nikolov, S.; Raabe, D.; Roters, F.: A Constitutive Model for Glassy Polymers with Shear Transformation Zones Plasticity and Reptation-Based Viscoelasticity. MMM Third International Conference Multiscale Materials Modeling, Freiburg, Germany (2006)
Zaafarani, N.; Roters, F.; Raabe, D.: A Study of Deformation and texture Evolution during Nanoindentation in a Cu Single Crystal using Phenomenological and Physically-Based Crystal Plasticity FE Models. MMM Third International Conference Multiscale Materials Modeling, Freiburg, Germany (2006)
Kobayashi, S.; Zaefferer, S.; Raabe, D.: Relative Importance of Nucleation vs. Growth for Recrystallisation of Particle-containing Fe3Al Alloys. Fundamentals of Deformation and Annealing Symposium, Manchester, UK (2006)
Zaafarani, N.; Roters, F.; Raabe, D.: Recent Progress in the 3D Experimentation and Simulation of Nanoindents. Symposium Fundamentals of Deformation and Annealing, Manchester, UK (2006)
Bieler, T. R.; Crimp, M. A.; Ma, A.; Roters, F.; Raabe, D.: A Slip Interaction Based Measure of Damage Nucleation in Grain Boundaries. 3rd International Conference on Multiscale Materials Modeling, Freiburg, Germany (2006)
Raabe, D.: Neues aus der Eisenzeit - Simulationen und Experimente in der Kristallmechanik und frischer Hummer. Kolloquium an der Bundesantalt für Materialforschung (BAM), Berlin, Germany (2006)
Prymak, O.; Stein, F.; Palm, M.; Frommeyer, G.; Raabe, D.: Konstitutionsuntersuchungen im System Nb-Cr-Al: Erste Ergebnisse und weitere Planungen. Workshop: The Nature of Laves Phases VII, MPI für Metallforschung Stuttgart, Germany (2006)
Zambaldi, C.; Roters, F.; Raabe, D.: Spherical indentation modeling for the investigation of primary recrystallization in a single-crystal nickel-base superalloy. Plasticity, Halifax, Canada (2006)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
A high degree of configurational entropy is a key underlying assumption of many high entropy alloys (HEAs). However, for the vast majority of HEAs very little is known about the degree of short-range chemical order as well as potential decomposition. Recent studies for some prototypical face-centered cubic (fcc) HEAs such as CrCoNi showed that…
Electron channelling contrast imaging (ECCI) is a powerful technique for observation of extended crystal lattice defects (e.g. dislocations, stacking faults) with almost transmission electron microscopy (TEM) like appearance but on bulk samples in the scanning electron microscope (SEM).
About 90% of all mechanical service failures are caused by fatigue. Avoiding fatigue failure requires addressing the wide knowledge gap regarding the micromechanical processes governing damage under cyclic loading, which may be fundamentally different from that under static loading. This is particularly true for deformation-induced martensitic…
We simulate the ionization contrast in field ion microscopy arising from the electronic structure of the imaged surface. For this DFT calculations of the electrified surface are combined with the Tersoff-Hamann approximation to electron tunneling. The approach allows to explain the chemical contrast observed for NiRe alloys.
Decarbonisation of the steel production to a hydrogen-based metallurgy is one of the key steps towards a sustainable economy. While still at the beginning of this transformation process, with multiple possible processing routes on different technological readiness, we conduct research into the related fundamental scientific questions at the MPIE.
Within this project, we will use an infra-red laser beam source based selective powder melting to fabricate copper alloy (CuCrZr) architectures. The focus will be on identifying the process parameter-microstructure-mechanical property relationships in 3-dimensional CuCrZr alloy lattice architectures, under both quasi-static and dynamic loading…