Publications

Kamachali, R. D.; Kwiatkowski da Silva, A.; McEniry, E.; Ponge, D.; Gault, B.; Neugebauer, J.; Raabe, D.: Segregation-assisted spinodal and transient spinodal phase separation at grain boundaries. npj Computational Materials 6, 191 (2020)

Wang, Z.; Lu, W.; Zhao, H.; Liebscher, C.; He, J.; Ponge, D.; Raabe, D.; Li, Z.: Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation. Science Advances 6 (46), eaba9543 (2020)

Ma, Y.; Sun, B.; Schökel, A.; Song, W.; Ponge, D.; Raabe, D.; Bleck, W.: Phase boundary segregation-induced strengthening and discontinuous yielding in ultrafine-grained duplex medium-Mn steels. Acta Materialia 200, pp. 389 - 403 (2020)

Zhao, H.; Gault, B.; Ponge, D.; Raabe, D.: Reversion and re-aging of a peak aged Al–Zn–Mg–Cu alloy. Scripta Materialia 188, pp. 269 - 273 (2020)

Wang, Z.; Lu, W.; Zhao, H.; He, J.; Wang, K.; Zhou, B.; Ponge, D.; Raabe, D.; Li, Z.: Formation mechanism of κ-carbides and deformation behavior in Si-alloyed FeMnAlC lightweight steels. Acta Materialia 198, pp. 258 - 270 (2020)

Kini, A.; Maischner, D.; Weisheit, A.; Ponge, D.; Gault, B.; Jägle, E. A.; Raabe, D.: In-situ synthesis via laser metal deposition of a lean Cu–3.4Cr–0.6Nb (at%) conductive alloy hardened by Cr nano-scale precipitates and by Laves phase micro-particles. Acta Materialia 197, pp. 330 - 340 (2020)

Souza Filho, I. R.; Dutta, A.; Almeida Junior, D. R.; Lu, W.; Sandim, M. J. R.; Ponge, D.; Sandim, H. R. Z.; Raabe, D.: The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α’ transformation to twinning. Acta Materialia 197, pp. 123 - 136 (2020)

Raabe, D.; Sun, B.; Kwiatkowski da Silva, A.; Gault, B.; Yen, H.-W.; Sedighiani, K.; Prithiv, T. S.; Souza Filho, I. R.; Katnagallu, S.; Jägle, E. A. et al.; Kürnsteiner, P.; Kusampudi, N.; Stephenson, L.; Herbig, M.; Liebscher, C.; Springer, H.; Zaefferer, S.; Shah, V.; Wong, S. L.; Baron, C.; Diehl, M.; Roters, F.; Ponge, D.: Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels. Metallurgical and Materials Transactions A 51, pp. 5517 - 5586 (2020)

An, D.; Zhao, H.; Sun, B.; Zaefferer, S.: Direct observations of collinear dislocation interaction in a Fe–17.4 Mn–1.50 Al–0.29 C (wt.%) austenitic steel under cyclic loading by in-situ electron channelling contrast imaging and cross-correlation electron backscatter diffraction. Scripta Materialia 186, pp. 341 - 345 (2020)

Lu, X.; Ma, Y.; Wang, D.: On the hydrogen embrittlement behavior of nickel-based alloys: Alloys 718 and 725. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 792, 139785 (2020)

Lei, Z.; Wu, Y.; He, J.; Liu, X.; Wang, H.; Jiang, S.; Gu, L.; Zhang, Q.; Gault, B.; Raabe, D. et al.; Lu, Z.: Snoek-type damping performance in strong and ductile high-entropy alloys. Science Advances 6 (25), eaba7802 (2020)

Luo, H.; Sohn, S. S.; Lu, W.; Li, L.; Li, X.; Soundararajan, C. K.; Krieger, W.; Li, Z.; Raabe, D.: A strong and ductile medium-entropy alloy resists hydrogen embrittlement and corrosion. Nature Communications 11, 3081 (2020)

Guitar, M. A.; Scheid, A.; Nayak, U. P.; Nakamura, L.; Ponge, D.; Britz, D.; Mücklich, F. T.: Quantification of the Phase Transformation Kinetics in High Chromium Cast Irons Using Dilatometry and Metallographic Techniques. Metallurgical and Materials Transactions A 51, pp. 3789 - 3801 (2020)

Zhao, H.; Chen, Y.; Gault, B.; Makineni, S. K.; Ponge, D.; Raabe, D.: (Al, Zn)₃Zr dispersoids assisted η′ precipitation in an Al–Zn–Mg–Cu–Zr alloy. Materialia 10, 100641 (2020)

Breen, A. J.; Stephenson, L.; Sun, B.; Li, Y.; Kasian, O.; Raabe, D.; Herbig, M.; Gault, B.: Solute hydrogen and deuterium observed at the near atomic scale in high-strength steel. Acta Materialia 188, pp. 108 - 120 (2020)

Guo, B.; Chen, Y.; Wang, Z.; Yi, J.; Ni, S.; Du, Y.; Li, W.; Song, M.: Enhancement of strength and ductility by interfacial nano-decoration in carbon nanotube/aluminum matrix composites. Carbon 159, pp. 201 - 212 (2020)

Haghdadi, N.; Cizek, P.; Hodgson, P. D.; He, Y.; Sun, B.; Jonas, J. J.; Rohrer, G. S.; Beladi, H.: New insights into the interface characteristics of a duplex stainless steel subjected to accelerated ferrite-to-austenite transformation. Journal of Materials Science 55 (12), pp. 5322 - 5339 (2020)

Yang, J.; Chen, Y.; Huang, Y.; Ning, Z.; Liu, B.; Guo, C.; Sun, J.: Hierarchical microstructure of a titanium alloy fabricated by electron beam selective melting. Journal of Materials Science & Technology 42, pp. 1 - 9 (2020)

Ding, R.; Yao, Y.; Sun, B.; Liu, G.; He, J.; Li, T.; Wan, X.; Dai, Z.; Ponge, D.; Raabe, D. et al.; Zhang, C.; Godfrey, A.; Miyamoto, G.; Furuhara, T.; Yang, Z.; van der Zwaag, S.; Chen, H.: Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels. Science Advances 6 (13), eaay1430 (2020)

Prithiv, T. S.; Thirumurugan, G.; Madan, M.; Kamaraj, A.: Thermodynamic Assessment of Steelmaking Practices for the Production of Re-sulfur Steels. Transactions of the Indian Institute of Metals 73 (6), pp. 1595 - 1603 (2020)