Ponge, D.; Song, R.; Kaspar, R.: The effect of Mn on the microstructure and mechanical properties after heavy warm rolling of C-Mn steel. Lecture at the 2004 TMS annual meeting in Charlotte, North Carolina, USA (2004)

Ponge, D.: Arbeiten des MPI für Eisenforschung auf dem Gebiet der feinkörnigen Stähle. Lecture at the Sitzung des Arbeitsausschusses des Werkstoffausschusses, Stahlinstitut VDEh, Düsseldorf, Germany (2004)

Ponge, D.: Hochfeste Baustähle und deren schweißtechnische Verarbeitung. Berufsfortbildung Deutscher Verband für Schweißen und verwandte Verfahren e. V., Hamburg (2003)

Elsner, A.; Kaspar, R.: Deep-Drawable Steel Strip Produced by Ferritic Rolling. Lecture at the International Conference on Processing & Manufacturing of Advanced Materials THERMEC'2003, Leganes, Madrid, Spain (2003)

Storojeva, L.; Kaspar, R.; Ponge, D.: Ferritic-Pearlitic Steel with Deformation Induced Spheroidized Cementite. Lecture at the International Conference on Processing & Manufacturing of Advanced Materials THERMEC'2003, Leganes, Madrid, Spain (2003)

Storojeva, L.; Escher, C.; Bode, R.; Hulka, K.: Stabilization and Processing Concept for the Production of ULC Steel Sheet with Bake Hardenability. Lecture at the International Forum for the Properties and Application of IF Steels, Tokyo, Japan (2003)

Bhat, M. K.; Frommeyer, L.; Prithiv, T. S.; Dehm, G.; Best, J. P.: Using small-scale mechanics to probe the origins of segregation-induced strengthening. Nanomechanical Testing in Materials Research and Development VIII, Split, Croatia (2022)

Devulapalli, V.; Hans, M.; Prithiv, T. S.; Schneider, J. M.; Dehm, G.; Liebscher, C.: Unravelling the atomic structure and segregation of Ʃ13 [0001] tilt grain boundaries in titanium by advanced STEM. Microscopy Conference 2021 & Multinational Conference on Microscopy 2021, Vienna, Austria (2021)

Rao, Z.; Ponge, D.; Körmann, F.; Ikeda, Y.; Schneeweiss, O.; Friák, M.; Neugebauer, J.; Raabe, D.; Li, Z.: Invar effects in FeNiCo medium entropy alloys: from an invar treasure map to alloy design. DPG Regensburg 2019, Regensburg, Germany (2019)

Kürnsteiner, P.; Wilms, M. B.; Weisheit, A.; Bajaj, P.; Li, X.; Leinenbach, C.; Jägle, E. A.; Raabe, D.: Preventing the Coarsening of Al₃Sc Precipitates by the Formation of a Zr-rich Shell During Laser Metal Deposition. Alloys for Additive Manufacturing Symposium, Sheffield, UK (2018)

Luo, H.; Li, Z.; Ponge, D.; Raabe, D.: Corrosion behaviour of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution. Thermec 2018, Paris, France (2018)

Chang, Y.; Lu, W.; Stephenson, L.; Szczepaniak, A.; Kontis, P.; Ackerman, A.; Mouton, I.; Dye, D.; Liebscher, C.; Ponge, D. et al.; Raabe, D.; Gault, B.: Cryogenic Focused Ion Beam milling - a promising technique to prevent undesired hydrogen pick-up and hydride formation in Ti-alloys during specimen preparation. Atom Probe Tomography and Microscopy 2018 , Gaitherburg, MD, USA (2018)

Kwiatkowski da Silva, A.; Ponge, D.; Inden, G.; Gault, B.; Raabe, D.: Physical Metallurgy of Segregation and Austenite Reversion in Medium Mn Steels. TMS 2018 Annual Meeting & Exhibition, Phoenix, AZ, USA (2018)

Bajaj, P.; Gupta, A.; Jägle, E. A.; Raabe, D.: Precipitation kinetics during non-linear heat treatment in Laser Additive Manufacturing. International Conference on Advanced Materials and Processes, ‘ADMAT 2017’ SkyMat, Thiruvananthapuram, India (2017)

Bajaj, P.; Kürnsteiner, P.; Wilms, M. B.; Weisheit, A.; Jägle, E. A.; Raabe, D.: Precipitation kinetics during non-linear heat treatment in Laser Additive Manufacturing (LAM). Alloys for Additive Manufacturing Symposium, Zürich, Switzerland (2017)

Diehl, M.; Kühbach, M.; Broß, C.; Raabe, D.: Experimental-Numerical Analysis of Primary Recrystallization in DC04 Low Carbon Steel. Gordon Research Conference on Physical Metallurgy: Frontiers of Quantification and Predictive Capability in Physical Metallurgy, University of New England, Biddeford, ME, USA (2017)

Kwiatkowski da Silva, A.; Ponge, D.; Inden, G.; Gault, B.; Raabe, D.: Physical Metallurgy of segregation, austenite reversion, carbide precipitation and related phenomena in medium Mn steels. Gordon Research Conference: Physical Metallurgy, Biddeford, ME, USA (2017)

Broß, C.; Diehl, M.; Raabe, D.: Quasi In-Situ Untersuchung der statischen Rekristallisation in DC04 Stahl. Fachtagung für Mikroskopie und Präparation MikPräp 2017, Solingen, Germany (2017)

Morsdorf, L.; Tasan, C. C.; Ponge, D.; Raabe, D.: Correlative Study of Carbon Segregation in Low Carbon Martensitic Steels by Combined EBSD, ECCI and APT Analysis. MSE 2014, Darmstadt, Germany (2014)

Neddermann, P.; Ponge, D.; Raabe, D.: Influence of Chromium on the Low Temperature Austenite Reversion through Local Equilibrium in Martensitic Stainless Steel. MSE 2014, Darmstadt, Germany (2014)