Publications of Philipp Kürnsteiner

Li, J.; Zhou, X.; Breen, A. J.; Peng, Z.; Su, J.; Kürnsteiner, P.; Duarte, M. J.; Duarte Correa, M. J.; Lipińska-Chwałek, M.; Wang, H. et al.; Holec, D.; Mayer, J.; Dehm, G.: Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg–Al–Ca–Mn alloys. Journal of Alloys and Compounds 928, 167177 (2022)

Saewe, J.; Carstensen, N.; Kürnsteiner, P.; Jägle, E. A.; Schleifenbaum, J. H.: Influence of increased carbon content on the processability of high-speed steel HS6-5-3-8 by laser powder bed fusion. Additive Manufacturing 46, 102125 (2021)

Kante, S.; Kürnsteiner, P.; Motylenko, M.; Gault, B.; Leineweber, A.: Eutectoid growth of nanoscale amorphous Fe–Si nitride upon nitriding. Acta Materialia 209, 116774 (2021)

Doñate-Buendia, C.; Kürnsteiner, P.; Stern, F.; Wilms, M. B.; Streubel, R.; Kusoglu, I. M.; Tenkamp, J.; Bruder, E.; Pirch, N.; Barcikowski, S. et al.; Durst, K.; Schleifenbaum, J. H.; Walther, F.; Gault, B.; Gökce, B.: Microstructure formation and mechanical properties of ODS steels built by laser additive manufacturing of nanoparticle coated iron-chromium powders. Acta Materialia 206, 116566 (2021)

Yadav, A. S.; Kürnsteiner, P.; Jägle, E. A.; Sasidhar, K. N.; Meka, S. R.: Nitride Dispersion Strengthened Steel Development after Sintering of Nitrided Fe–4.6 at% Al Alloy Powder. Steel Research International 7, 2100174 (2021)

Raabe, D.; Sun, B.; Kwiatkowski da Silva, A.; Gault, B.; Yen, H.-W.; Sedighiani, K.; Prithiv, T. S.; Souza Filho, I. R.; Katnagallu, S.; Jägle, E. A. et al.; Kürnsteiner, P.; Kusampudi, N.; Stephenson, L.; Herbig, M.; Liebscher, C.; Springer, H.; Zaefferer, S.; Shah, V.; Wong, S. L.; Baron, C.; Diehl, M.; Roters, F.; Ponge, D.: Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels. Metallurgical and Materials Transactions A 51, pp. 5517 - 5586 (2020)

Stückler, M.; Krenn, H.; Kürnsteiner, P.; Gault, B.; De Geuser, F.; Weissitsch, L.; Wurster, S.; Pippan, R.; Bachmaier, A.: Intermixing of Fe and Cu on the atomic scale by high-pressure torsion as revealed by DC- and AC-SQUID susceptometry and atom probe tomography. Acta Materialia 196, pp. 210 - 219 (2020)

Yadav, A. S.; Kürnsteiner, P.; Jägle, E. A.; Meka, S. R.: Nitridation and hydrogen reduction of Fe–2.3 wt% Al alloy powder. Powder Technology 374, pp. 527 - 533 (2020)

Kürnsteiner, P.; Wilms, M. B.; Weisheit, A.; Gault, B.; Jägle, E. A.; Raabe, D.: High-strength Damascus steel by additive manufacturing. Nature 582, pp. 515 - 519 (2020)

Cervellon, A.; Hémery, S.; Kürnsteiner, P.; Gault, B.; Kontis, P.; Cormier, J.: Crack initiation mechanisms during very high cycle fatigue of Ni-based single crystal superalloys at high temperature. Acta Materialia 188, pp. 131 - 144 (2020)

Kürnsteiner, P.; Bajaj, P.; Gupta, A.; Wilms, M. B.; Weisheit, A.; Li, X.; Leinenbach, C.; Gault, B.; Jägle, E. A.; Raabe, D.: Control of thermally stable core-shell nano-precipitates in additively manufactured Al–Sc–Zr alloys. Additive Manufacturing 32, 100910 (2020)

Bajaj, P.; Hariharan, A.; Kini, A.; Kürnsteiner, P.; Raabe, D.; Jägle, E. A.: Steels in additive manufacturing: A review of their microstructure and properties. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 772, 138633 (2020)

Jia, Q.; Rometsch, P.; Kürnsteiner, P.; Chao, Q.; Huang, A.; Weyland, M.; Bourgeois, L.; Wu, X.: Selective laser melting of a high strength AlMnSc alloy: Alloy design and strengthening mechanisms. Acta Materialia 171, pp. 108 - 118 (2019)

Haubrich, J.; Gussone, J.; Barriobero-Vila, P.; Kürnsteiner, P.; Jägle, E. A.; Raabe, D.; Schell, N.; Requena, G.: The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti–6Al–4V. Acta Materialia 167, pp. 136 - 148 (2019)

Kürnsteiner, P.; Commenda, C.; Arenholz, E. A.; Samek, L.; Stifter, D.; Groiss, H.: Investigation of nanoscale twinning in an advanced high manganese twinning-induced plasticity steel. Materialia 1, pp. 70 - 77 (2018)

Chang, Y.; Breen, A. J.; Tarzimoghadam, Z.; Kürnsteiner, P.; Gardner, H.; Ackerman, A.; Radecka, A.; Bagot, P. A. J.; Lu, W.; Li, T. et al.; Jägle, E. A.; Herbig, M.; Stephenson, L.; Moody, M. P.; Rugg, D.; Dye, D.; Ponge, D.; Raabe, D.; Gault, B.: Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale. Acta Materialia 150, pp. 273 - 280 (2018)

Gault, B.; Breen, A. J.; Chang, Y.; He, J.; Jägle, E. A.; Kontis, P.; Kürnsteiner, P.; Kwiatkowski da Silva, A.; Makineni, S. K.; Mouton, I. et al.; Peng, Z.; Ponge, D.; Schwarz, T.; Stephenson, L.; Szczepaniak, A.; Zhao, H.; Raabe, D.: Interfaces and defect composition at the near-atomic scale through atom probe tomography investigations. Journal of Materials Research 33 (23), pp. 4018 - 4030 (2018)

Kürnsteiner, P.; Wilms, M. B.; Weisheit, A.; Barriobero-Vila, P.; Jägle, E. A.; Raabe, D.: Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition. Acta Materialia 129, pp. 52 - 60 (2017)

Jägle, E. A.; Sheng, Z.; Kürnsteiner, P.; Ocylok, S.; Weisheit, A.; Raabe, D.: Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing. Materials 10 (1), 8 (2017)

Kürnsteiner, P.; Wilms, M. B.; Weisheit, A.; Barriobero-Vila, P.; Gault, B.; Jägle, E. A.; Raabe, D.: In-process Precipitation During Laser Additive Manufacturing Investigated by Atom Probe Tomography. Microscopy and Microanalysis 23 (S1), pp. 694 - 695 (2017)