Publications of Hauke Springer

Neuß, D.; McCaroll, I.; Zhang, S.; Woods, E.; Delis, W. J.; Tanure, L.; Springer, H.; Sandlöbes, S.; Yang, J.; Todorova, M. et al.; Zander, D.; Scheu, C.; Schneider, J. M.; Hans, M.: High-resolution chemical and structural characterization of the native oxide scale on a Mg-based alloy. Corrosion Science 227, 111776 (2024)

Neuß, D.; McCaroll, I.; Zhang, S.; Woods, E.; Delis, W. J.; Tanure, L.; Springer, H.; Sandlöbes, S.; Yang, J.; Todorova, M. et al.; Zander, D.; Scheu, C.; Schneider, J. M.; Hans, M.: High-resolution chemical and structural characterization of the native oxide scale on a Mg-based alloy. arxiv Condensed Matter (2023)

Souza Filho, I. R.; Ma, Y.; Raabe, D.; Springer, H.: Fundamentals of Green Steel Production: On the Role of Gas Pressure During Hydrogen Reduction of Iron Ores. JOM-Journal of the Minerals Metals & Materials Society 75, pp. 2274 - 2286 (2023)

Zubair, M.; Felten, M.; Hallstedt, B.; Vega Paredes, M.; Abdellaoui, L.; Bueno Villoro, R.; Lipinska-Chwalek, M.; Ayeb, N.; Springer, H.; Mayer, J. et al.; Berkels, B.; Zander, D.; Korte-Kerzel, S.; Scheu, C.; Zhang, S.: Laves phases in Mg–Al–Ca alloys and their effect on mechanical properties. Materials & Design 225, 111470 (2023)

Choisez , L.; van Rooij, N. E.; Hessels , C. J. M.; Kwiatkowski da Silva, A.; Souza Filho, I. R.; Ma, Y.; de Goey, P.; Springer, H.; Raabe, D.: Phase transformations and microstructure evolution during combustion of iron powder. Acta Materialia 239, 118261 (2022)

Andre, D.; Freund, M.; Rehman, U.; Delis, W.; Felten, M.; Nowak, J.; Tian, C.; Zubair, M.; Tanure, L.; Abdellaoui, L. et al.; Springer, H.; Best, J. P.; Zander, D.; Dehm, G.; Sandlöbes-Haut, S.; Korte-Kerzel, S.: Metallographic preparation methods for the Mg based system Mg–Al–Ca and its Laves phases. Materials Characterization 192, 112187 (2022)

Souza Filho, I. R.; Springer, H.; Ma, Y.; Mahajan, A.; Corrêa da Silva, C.; Kulse, M.; Raabe, D.: Green steel at its crossroads: Hybrid hydrogen-based reduction of iron ores. Journal of Cleaner Production 340, 130805 (2022)

Rao, Z.; Springer, H.; Ponge, D.; Li, Z.: Combinatorial development of multicomponent Invar alloys via rapid alloy prototyping. Materialia 21, 101326 (2022)

Ma, Y.; Souza Filho, I. R.; Zhang, X.; Nandy, S.; Barriobero-Vila, P.; Requena, G.; Vogel, D.; Rohwerder, M.; Ponge, D.; Springer, H. et al.; Raabe, D.: Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales. International Journal of Minerals, Metallurgy and Materials 29 (10), pp. 1901 - 1907 (2022)

Springer, H.; Baron, C.; Tanure, L.; Rohwerder, M.: A combinatorial study of the effect of Al and Cr additions on the mechanical, physical and corrosion properties of Fe. Materials Today Communications 29, 102947 (2021)

Hans, M.; Keuter, P.; Saksena, A.; Sälker, J. A.; Momma, M.; Springer, H.; Nowak, J.; Zander, D.; Primetzhofer, D.; Schneider, J. M.: Opportunities of combinatorial thin film materials design for the sustainable development of magnesium-based alloys. Scientific Reports 11, 17454 (2021)

Souza Filho, I. R.; Ma, Y.; Kulse, M.; Ponge, D.; Gault, B.; Springer, H.; Raabe, D.: Sustainable steel through hydrogen plasma reduction of iron ore: Process, kinetics, microstructure, chemistry. Acta Materialia 213, 116971 (2021)

Pinson, M.; Springer, H.; Depover, T.; Verbeken, K.: The effect of quench cracks and retained austenite on the hydrogen trapping capacity of high carbon martensitic steels. International Journal of Hydrogen Energy 46 (29), pp. 16141 - 16152 (2021)

Baron, C.; Werner, H.; Springer, H.: On the effect of carbon content and tempering on mechanical properties and stiffness of martensitic Fe–18.8Cr–1.8B–xC high modulus steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 809, 141000 (2021)

Raabe, D.; Sun, B.; Kwiatkowski da Silva, A.; Gault, B.; Yen, H.-W.; Sedighiani, K.; Prithiv, T. S.; Souza Filho, I. R.; Katnagallu, S.; Jägle, E. A. et al.; Kürnsteiner, P.; Kusampudi, N.; Stephenson, L.; Herbig, M.; Liebscher, C.; Springer, H.; Zaefferer, S.; Shah, V.; Wong, S. L.; Baron, C.; Diehl, M.; Roters, F.; Ponge, D.: Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels. Metallurgical and Materials Transactions A 51, pp. 5517 - 5586 (2020)

Zhang, J.; Cann, J. L.; Maisel, S.; Qu, K.; Plancher, E.; Springer, H.; Povoden-Karadeniz, E.; Gao, P.; Ren, Y.; Grabowski, B. et al.; Tasan, C. C.: Design of a V–Ti–Ni alloy with superelastic nano-precipitates. Acta Materialia 196, pp. 710 - 722 (2020)

Pinson, M.; Springer, H.; Depover, T.; Verbeken, K.: Qualification of the in-situ bending technique towards the evaluation of the hydrogen induced fracture mechanism of martensitic Fe–C steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 792, 139754 (2020)

Springer, H.; Baron, C.; Mostaghimi, F.; Poveleit, J.; Mädler, L.; Uhlenwinkel, V.: Additive manufacturing of high modulus steels: New possibilities for lightweight design. Additive Manufacturing 32, 101033 (2020)

Baron, C.; Springer, H.: Property-Driven Development of Metallic Structural Materials by Combinatorial Techniques on the Example of Fe–C–Cr Steels. Steel Research International 90 (12), 1900404 (2019)

Springer, H.; Zhang, J.; Szczepaniak, A.; Belde, M. M.; Gault, B.; Raabe, D.: Light, strong and cost effective: Martensitic steels based on the Fe - Al - C system. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 762, 138088 (2019)