Kanjilal, A.; Rehman, U.; Best, J. P.; Dehm, G.: Microscale fracture behavior of Laves phases in the Mg–Ca–Al ternary alloy system. 86. Annual Meeting of DPG and DPG-Frühjahrstagung (DPG Spring Meeting) of the Matter and Cosmos Section (SMuK), Dresden, Germany (2023)
Kanjilal, A.; Rehman, U.; Best, J. P.; Dehm, G.: Microscale fracture behavior of Laves phases in the Mg–Ca–Al ternary alloy system. DPG-Frühjahrstagung (DPG Spring Meeting) of the Condensed Matter Section (SKM), Dresden, Germany (2023)
Brognara, A.; Best, J. P.; Djemia, P.; Faurie, D.; Dehm, G.; Ghidelli, M.: Effect of composition and nanolayering on mechanical properties of Zr100-xCux thin film metallic glasses. Talk at Université catholique de Louvain (UCL), Louvain-la-Neuve, Belgium (2022)
Hosseinabadi, R.; Riesch-Oppermann, H.; Best, J. P.; Dehm, G.; Kirchlechner, C.: Size-dependent coherent twin boundary strength contribution in Cu micropillars. Nanomechanical Testing in Materials Research and Development VIII, Split, Croatia (2022)
Hosseinabadi, R.; Riesch-Oppermann, H.; Best, J. P.; Dehm, G.; Kirchlechner, C.: Size effect in bi-crystalline Cu micropillars with a coherent twin boundary. ECI conference 2022, Nanomechanical Testing in Materials Research and Development VIII, Split, Croatia (2022)
Rielli, V. V.; Theska, .; Yao, Y.; Best, J. P.; Primig, S.: On the composition and nanomechanical response of δ-Phase and γ′′-free zone in Alloy 718. EuroSuperalloys 2022, Bamberg, Germany (2022)
Best, J. P.: The role of nanoscale structural ordering on the damage tolerance of laser-processed bulk metallic glasses. Materials Science Engineering MSE 2022, Darmstadt, Germany (2022)
Paul, M. J.; Liu, Q.; Best, J. P.; Li, X.; Kruzic, J. J.; Ramamurty, U.; Gludovatz, B.: Resistance curve behavior of AlSi10Mg fabricated by laser powder bed fusion. Combined Australian Materials Societies – CAMS2022, Melbourne, Australia (2022)
Best, J. P.: Chemical segregation to grain boundaries: Probing the micromechanical response with site-specific in situ SEM measurements. 66. Metallkunde-Kolloquium of the Montanuniversität Leoben, Lech am Arlberg, Austria (2022)
Best, J. P.: Recent progress in micromechanical testing of grain boundaries. Seminar at Laboratoire des Sciences des Procédés et des Matériaux (LSPM), Paris Nord University, Paris, France (2022)
Hosseinabadi, R.; Best, J. P.; Kirchlechner, C.; Dehm, G.: Impact of an incoherent twin boundary on the mechanical response of Cu bi-crystalline micropillars. 11th European Solid Mechanics Conference - ESMC 2022, Galway, Ireland (2022)
Jentner, R.; Best, J. P.; Kirchlechner, C.; Dehm, G.: Challenges in the phase identification of steels using unsupervised clustering of nanoindentation data. Nanomechanical Testing in Materials Research and Development VIII, Split, Croatia (accepted)
Brognara, A.; Best, J. P.; Djemia, P.; Faurie, D.; Dehm, G.; Ghidelli, M.: Toward engineered thin film metallic glasses with large mechanical properties: effect of composition and nanostructure. Seminat at Laboratoire des Sciences des Procédés et des Matériaux (LSPM), Paris Nord University, Paris, France (2021)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Hydrogen embrittlement (HE) is one of the most dangerous embrittlement problems in metallic materials and advanced high-strength steels (AHSS) are particularly prone to HE with the presence of only a few parts-per-million of H. However, the HE mechanisms in these materials remain elusive, especially for the lightweight steels where the composition…
With the support of DFG, in this project the interaction of H with mechanical, chemical and electrochemical properties in ferritic Fe-based alloys is investigated by the means of in-situ nanoindentation, which can characterize the mechanical behavior of independent features within a material upon the simultaneous charge of H.
The key to the design and construction of advanced materials with tailored mechanical properties is nano- and micro-scale plasticity. Significant influence also exists in shaping the mechanical behavior of materials on small length scales.
This project is part of Correlative atomic structural and compositional investigations on Co and CoNi-based superalloys as a part of SFB/Transregio 103 project “Superalloy Single Crystals”. This project deals with the identifying the local atomic diffusional mechanisms occurring during creep of new Co and Co/Ni based superalloys by correlative…
In this project, we investigate a high angle grain boundary in elemental copper on the atomic scale which shows an alternating pattern of two different grain boundary phases. This work provides unprecedented views into the intrinsic mechanisms of GB phase transitions in simple elemental metals and opens entirely novel possibilities to kinetically engineer interfacial properties.
About 90% of all mechanical service failures are caused by fatigue. Avoiding fatigue failure requires addressing the wide knowledge gap regarding the micromechanical processes governing damage under cyclic loading, which may be fundamentally different from that under static loading. This is particularly true for deformation-induced martensitic…
Copper is widely used in micro- and nanoelectronics devices as interconnects and conductive layers due to good electric and mechanical properties. But especially the mechanical properties degrade significantly at elevated temperatures during operating conditions due to segregation of contamination elements to the grain boundaries where they cause…