Grundmeier, G.; Fink, N.; Giza, M.; Popova, V.; Vlasak, R.; Wapner, K.: Application of combined spectroscopic, electrochemical and microscopic techniques for the understanding of adhesion and de-adhesion at polymer/metal interfaces. 24. Spektrometertagung, Dortmund, Germany (2005)
Grundmeier, G.; Wapner, K.: Anwendung einer neuen höhenregulierbaren Rasterkelvinsonde zur Untersuchung der Stabilität von Klebstoff-Metall-Grenzflächen in feuchten und korrosiven Atmosphären. Swissbonding, Rapperswil am Zürichsee, Switzerland (2005)
Grundmeier, G.; Wapner, K.; Schönberger, B.; Stratmann, M.: Fundamentals and Applications of a new height regulated Scanning Kelvin Probe in Corrosion and Adhesion Science. ISE 2004, Thessaloniki, Greece (2004)
Grundmeier, G.; Wapner, K.; Schönberger, B.; Stratmann, M.: Introduction of a height regulated Scanning Kelvin Probe for the simultaneous measurement of surface topography and interfacial electrode potentials in corrosive environments. ISE Conference, 55th Annual Meeting, Thessaloniki, Greece (2004)
Grundmeier, G.; Wapner, K.: Water diffusion measurements in a model adhesive/silicon lap joint using FTIR-spectroscopy: Differentiation between bulk and interfacial diffusion. Euradh 2004, Freiburg, Germany (2004)
Wapner, K.; Grundmeier, G.: Extended Abstract: Water diffusion measurements in a model adhesive/silicon lap joint using FTIR-spectroscopy: differentiation between bulk and interfacial diffusion. Euradh2004/Adhesion2004, Freiburg, Germany (2004)
Wapner, K.; Stratmann, M.; Grundmeier, G.: Extended Abstract: Non-destructive, in-situ measurement of de-adhesion processes at buried adhesive/metal interfaces by means of a new scanning Kelvin probe blister Test. Euradh2004/Adhesion2004, Freiburg, Germany (2004)
Grundmeier, G.; Wapner, K.; Stratmann, M.: Applications of a new height regulated Scanning Kelvin Probe for the study of polymer/metal interfaces in corrosive environments. ICEPAM 2004, Helsinki, Finnland (2004)
Grundmeier, G.; Wapner, K.; Schönberger, B.; Stratmann, M.: Non-destructive, real time in-situ measurement of de-adhesion processes at buried adhesive/metal interfaces by means of a new Scanning Kelvin Probe Blister Test. Annual Meeting of the American Adhesion Society, Wilmington, UK (2004)
Wapner, K.; Grundmeier, G.: Application of the Scanning Kelvin Probe for the study of de-adhesion processes at thin film engineered adhesive/metal interfaces. Annual Meeting of the American Adhesion Society, Wilmington, UK (2004)
Posner, R.; Wapner, K.; Stratmann, M.; Grundmeier, G.: Hydrated Ion Transport at Polymer/Oxide/Metal-Interfaces in Non-Corrosive Atmosphere: Influence of Electric Field Gradients. Gordon Conference Graduate Research Seminar on Aqueous Corrosion, Colby Sawyer College, New London, NH, USA (2008)
Klimow, G.; Wapner, K.; Grundmeier, G.: Applications of a Scanning Kelvin Probe for Studying Modified Adhesive/Metal Interfaces under Corrosive and Mechanical Load. 3rd World Congress on Adhesion and Related Phenomena, WCARP-III, Beijing, China (2006)
Wapner, K.; Stratmann, M.; Grundmeier, G.: Non-destructive, In-Situ Measurement of De-Adhesion Processes at Buried Adhesive/Metal Interfaces by Means of a New Scanning Kelvin Probe Blister Test. EUROMAT 2005, Prague, Czech Republic (2005)
Wapner, K.; Stratmann, M.; Grundmeier, G.: The application of the scanning Kelvin probe for investigating the deadhesion of adhesives on iron and zinc. EURADH 2002, Glasgow, UK (2002)
Wapner, K.: Grenzflächenchemische und elektrochemische Untersuchungen zur Haftung und Enthaftung an modifizierten Klebstoff/Metall-Grenzflächen. Dissertation, Ruhr-Universität Bochum, Fakultät für Chemie, Bochum, Germany (2006)
Max Planck scientists design a process that merges metal extraction, alloying and processing into one single, eco-friendly step. Their results are now published in the journal Nature.
Scientists of the Max-Planck-Institut für Eisenforschung pioneer new machine learning model for corrosion-resistant alloy design. Their results are now published in the journal Science Advances
The goal of this project is to develop an environmental chamber for mechanical testing setups, which will enable mechanical metrology of different microarchitectures such as micropillars and microlattices, as a function of temperature, humidity and gaseous environment.
Crystal plasticity modelling has gained considerable momentum in the past 20 years [1]. Developing this field from its original mean-field homogenization approach using viscoplastic constitutive hardening rules into an advanced multi-physics continuum field solution strategy requires a long-term initiative. The group “Theory and Simulation” of…
The project Hydrogen Embrittlement Protection Coating (HEPCO) addresses the critical aspects of hydrogen permeation and embrittlement by developing novel strategies for coating and characterizing hydrogen permeation barrier layers for valves and pumps used for hydrogen storage and transport applications.
The project focuses on development and design of workflows, which enable advanced processing and analyses of various data obtained from different field ion emission microscope techniques such as field ion microscope (FIM), atom probe tomography (APT), electronic FIM (e-FIM) and time of flight enabled FIM (tof-FIM).
This project will aim at addressing the specific knowledge gap of experimental data on the mechanical behavior of microscale samples at ultra-short-time scales by the development of testing platforms capable of conducting quantitative micromechanical testing under extreme strain rates upto 10000/s and beyond.
The development of pyiron started in 2011 in the CM department to foster the implementation, rapid prototyping and application of the highly advanced fully ab initio simulation techniques developed by the department. The pyiron platform bundles the different steps occurring in a typical simulation life cycle in a single software platform and…