Publications

Gopalan, H.; Rao, J.; Patil, P.; Jung, C.; Kim, S.-H.; Wolff-Goodrich, S.; Wetegrove, M.; Kruth, A.; Scheu, C.; Dehm, G. et al.; Duarte, M. J.: Influence of electrochemical hydrogen charging on the mechanical, diffusional, and interfacial properties of an amorphous alumina coating on Fe‑8 wt% Cr alloy. Journal of Materials Research (2024)

Farzam, F.; Bellón, L. B.; Chatain, D.; Jimenez, J. A.; Breitbach, B.; Ghidelli, M.; Duarte, M. J.; Dehm, G.: Decomposition and dewetting of super-saturated Cu-15 at. % Co solid solution film. Materials & Design 241, 112892 (2024)

Hieke, S. W.; Frank, A.; Duarte, M. J.; Gopalan, H.; Patil, P.; Wetegrove, M.; Rohloff, M.; Kruth, A.; Pistidda, C.; Dornheim, M. et al.; Taube, K.; Dehm, G.; Scheu, C.: Stability and Failure Mechanisms of Al₂O₃|Al Bilayer Coatings Exposed to 300 Bar Hydrogen at 673 K. Advanced Engineering Materials 26 (4), 2300619 (2024)

Ding, K.; Duarte, M. J.; Shen, X.; Zhang, S.; Li, J.; Kostka, A.; Bruder, E.; Li, J.; Song, W.; Durst, K. et al.; Best, J. P.; Fang, X.: Microstructural and micromechanical characterization of intergranular oxidation in Fe-15Cr alloy. Corrosion Science 225, 111613 (2023)

Rao, J.; Lee, S.; Dehm, G.; Duarte, M. J.: Hardening effect of diffusible hydrogen on BCC Fe-based model alloys by in situ backside hydrogen charging. Materials & Design 232, 112143 (2023)

Li, J.; Zhou, X.; Breen, A. J.; Peng, Z.; Su, J.; Kürnsteiner, P.; Duarte, M. J.; Duarte Correa, M. J.; Lipińska-Chwałek, M.; Wang, H. et al.; Holec, D.; Mayer, J.; Dehm, G.: Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg–Al–Ca–Mn alloys. Journal of Alloys and Compounds 928, 167177 (2022)

Gopalan, H.; Marshal, A.; Hans, M.; Primetzhofer, D.; Cautaerts, N.; Breitbach, B.; Völker, B.; Kirchlechner, C.; Schneider, J. M.; Dehm, G.: On the interplay between microstructure, residual stress and fracture toughness of (Hf–Nb–Ta–Zr)C multi-metal carbide hard coatings. Materials & Design 224, 111323 (2022)

Schwiedrzik, J. J.; Ramachandramoorthy, R.; Edwards, T. E. J.; Schürch, P.; Casari, D.; Duarte, M. J.; Mohanty, G.; Dehm, G.; Maeder, X.; Philippe, L. et al.; Breguet, J.-M.; Michler, J. K.: Dynamic cryo-mechanical properties of additively manufactured nanocrystalline nickel 3D microarchitectures. Materials & Design 220, 110836 (2022)

Nie, Z.-Y.; Sato, Y.; Ogata, S.; Duarte, M. J.; Dehm, G.; Li, J.; Ma, E.; Xie, D.-G.; Shan, Z.-W.: Ultralong one-dimensional plastic zone created in aluminum underneath a nanoscale indent. Acta Materialia 232, 117944 (2022)

Mishra, A. K.; Gopalan, H.; Hans, M.; Kirchlechner, C.; Schneider, J. M.; Dehm, G.; Jaya, B. N.: Strategies for damage tolerance enhancement in metal/ceramic thin films: Lessons learned from Ti/TiN. Acta Materialia 228, 117777 (2022)

Wu, G.; Liu, C.; Brognara, A.; Ghidelli, M.; Bao, Y.; Liu, S.; Wu, X.; Xia, W.; Zhao, H.; Rao, J. et al.; Ponge, D.; Devulapalli, V.; Lu, W.; Dehm, G.; Raabe, D.; Li, Z.: Symbiotic crystal-glass alloys via dynamic chemical partitioning. Materials Today 51, pp. 6 - 14 (2021)

Peter, N. J.; Duarte, M. J.; Kirchlechner, C.; Liebscher, C.; Dehm, G.: Faceting diagram for Ag segregation induced nanofaceting at an asymmetric Cu tilt grain boundary. Acta Materialia 214, 116960 (2021)

Duarte, M. J.; Fang, X.; Rao, J.; Krieger, W.; Brinckmann, S.; Dehm, G.: In situ nanoindentation during electrochemical hydrogen charging: a comparison between front-side and a novel back-side charging approach. Journal of Materials Science 56 (14), pp. 8732 - 8744 (2021)

Seok, M.-Y.; Gopalan, H.; Nandy, S.; Zaefferer, S.; Raabe, D.; Kirchlechner, C.; Dehm, G.: Microscale plastic anisotropy of basal and pyramidal I slip in pure magnesium tested in shear. Materialia 14, 100932 (2020)

Peter, N. J.; Duarte, M. J.; Liebscher, C.; Srivastava, V. C.; Uhlenwinkel, V.; Jägle, E. A.; Dehm, G.: Early stage phase separation of AlCoCr_0.75Cu_0.5FeNi high-entropy powder at the nanoscale. Journal of Alloys and Compounds 820, 153149 (2020)

Lee, S.; Duarte, M. J.; Feuerbacher, M.; Soler, R.; Kirchlechner, C.; Liebscher, C.; Oh, S. H.; Dehm, G.: Dislocation plasticity in FeCoCrMnNi high-entropy alloy: quantitative insights from in situ transmission electron microscopy deformation. Materials Research Letters 8 (6), pp. 216 - 224 (2020)

Dehm, G.; Scheu, C.; Gopalan, H.; Hieke, S. W.; Duarte, M. J.: Stability of Amorphous Al₂O₃ Hydrogen Barrier Coatings during Application. The International Symposium on Advanced Coatings for Energy – ISC4E 2023, Ben Guerir, Morocco (2023)

Dehm, G.; Langenohl, L.; Ahmad, S.; Ahmadian, A.; Frolov, T.; Duarte, M. J.; Richter , G.; Zhou, X.; Gault, B.; Bishara, H. et al.; Brink, T.; Liebscher, C.: Resolving grain boundary complexions in Copper by STEM and analyzing their impact on properties. Workshop Advanced Electron Microscopy in Materials Research, La Clusaz, France (2023)

Dehm, G.; Rao, J.; Duarte, M. J.: Impact of Hydrogen on Dislocation Nucleation and Strength in bcc Fe–Cr alloys. TMS 2022 Annual Meeting, Symposium “Mechanical Behavior at the Nanoscale VI”, Anaheim, CA, USA (2022)

Duarte, M. J.: Hydrogen effects on the mechanical behavior of Fe alloys at small scale. Micromechanical and Macroscopic Modelling (MMM) Special Seminar, Interdisciplinary Centre for Advanced Materials Simulation (ICAMS), Ruhr-Universität Bochum, online, Bochum, Germany (2021)