Evers, S.; Senöz, C.; Rohwerder, M.: Hydrogen detection in metals: A review and introduction of a Kelvin probe approach. Science and Technology of Advanced Materials 14 (1), 014201 (2013)
Maljusch, A.; Senöz, C.; Rohwerder, M.; Schuhmann, W.: Combined high resolution scanning Kelvin probe - Scanning electrochemical microscopy investigations for the visualization of local corrosion processes. Electrochimica Acta 82, pp. 339 - 348 (2012)
Senöz, C.; Borodin, S.; Stratmann, M.; Rohwerder, M.: In-situ detection of differences in the electrochemical activity of Al2Cu IMPs and investigation of their effect on FFC by scanning Kelvin probe force microscopy. Corrosion Science 58, pp. 307 - 314 (2012)
Senöz, C.; Maljusch, A.; Rohwerder, M.; Schuhmann, W.: SECM and SKPFM studies of the local corrosion mechanism of Al alloys-A pathway to an integrated SKP-SECM system. Electroanalysis 24 (2), pp. 239 - 245 (2012)
Senöz, C.; Evers, S.; Stratmann, M.; Rohwerder, M.: Scanning Kelvin Probe as a highly sensitive tool for detecting hydrogen permeation with high local resolution. Electrochemistry Communucations 13 (12), pp. 1542 - 1545 (2011)
Senöz, C.; Rohwerder, M.: Scanning Kelvin probe force microscopy for the in situ observation of the direct interaction between active head and intermetallic particles in filiform corrosion on aluminium alloy. Electrochimica Acta 56 (26), pp. 9588 - 9595 (2011)
Merzlikin, S. V.; Bashir, A.; Evers, S.; Senöz, C.; Rohwerder, M.: Using Scanning Kelvin Probe Force Microscopy and Thermal Desorption for Localized Hydrogen Detection and Quantification in Steels. 2nd International Conference on hydrogen in Steels, Gent, Belgium (2014)
Evers, S.; Senöz, C.; Rohwerder, M.: Investigation of the Interaction between H2 and trap sites in Duplex Steel by Scanning Kelvin Probe Force Microscopy. 63rd Annual Meeting of the International Society of Electrochemistry, Prague, Czech Republic (2012)
Senöz, C.; Rohwerder, M.: High Resolution Study of Hydrogen Permeation through Metals by Scanning Kelvin Probe Force Microscopy. 217th ECS Meeting, Vancouver, Canada (2010)
Senöz, C.; Rohwerder, M.: Application of Atomic Force Microscopy in its Kelvin Probe Mode (SKPFM) over Filiform Corrosion of Aluminum Alloys. Workshop on Scanning Probe Microscopies and Organic Materials XVII, Bremen, Germany (2009)
Senöz, C.; Maljusch, A.; Rohwerder, M.; Schuhmann, W.: Microstructural and Surface Potential Study of Al–4 wt% Cu–Mg (DURAL) Alloy. ICAA 11, 11th International Conference on Aluminium Alloys, Aachen, Germany (2008)
Senöz, C.: High resolution investigation of localized corrosion by in-situ SKPFM. Dissertation, Fakultät für Maschinenbau der Ruhr-Universität Bochum, Bochum, Germany (2011)
International researcher team presents a novel microstructure design strategy for lean medium-manganese steels with optimized properties in the journal Science
Adding 30 to 50 at.% aluminum to iron results in single-phase alloys with an ordered bcc-based crystal structure, so-called B2-ordered FeAl. Within the extended composition range of this intermetallic phase, the mechanical behavior varies in a very particular way.
The structure of grain boundaries (GBs) is dependent on the crystallographic structure of the material, orientation of the neighbouring grains, composition of material and temperature. The abovementioned conditions set a specific structure of the GB which dictates several properties of the materials, e.g. mechanical behaviour, diffusion, and…
In this project, the effects of scratch-induced deformation on the hydrogen embrittlement susceptibility in pearlite is investigated by in-situ nanoscratch test during hydrogen charging, and atomic scale characterization. This project aims at revealing the interaction mechanism between hydrogen and scratch-induced deformation in pearlite.
By using the DAMASK simulation package we developed a new approach to predict the evolution of anisotropic yield functions by coupling large scale forming simulations directly with crystal plasticity-spectral based virtual experiments, realizing a multi-scale model for metal forming.
The aim of this project is to correlate the point defect structure of Fe1-xO to its mechanical, electrical and catalytic properties. Systematic stoichiometric variation of magnetron-sputtered Fe1-xO thin films are investigated regarding structural analysis by transition electron microscopy (TEM) and spectroscopy methods, which can reveal the defect…