Ahmadian, A.; Schreiber, D.; Zhou, X.; Gault, B.; Liebscher, C.; Romaner, L.; Dehm, G.: Aluminum depletion induced by co-segregation of carbon and boron in a bcc-iron grain boundary. Nature Communications 12, 6008 (2021)

Devulapalli, V.; Bishara, H.; Ghidelli, M.; Dehm, G.; Liebscher, C.: Influence of substrates and e-beam evaporation parameters on the microstructure of nanocrystalline and epitaxially grown Ti thin films. Applied Surface Science 562, 150194 (2021)

Holzapfel, D. M.; Mušić, D.; Hans, M.; Wolff-Goodrich, S.; Holec, D.; Bogdanovski, D.; Arndt, M.; Eriksson, A. O.; Yalamanchili, K.; Primetzhofer, D. et al.; Liebscher, C.; Schneider, J. M.: Enhanced thermal stability of (Ti,Al)N coatings by oxygen incorporation. Acta Materialia 218, 117204 (2021)

Jeong, J.; Cautaerts, N.; Dehm, G.; Liebscher, C.: Automated Crystal Orientation Mapping by Precession Electron Diffraction-Assisted Four-Dimensional Scanning Transmission Electron Microscopy Using a Scintillator-Based CMOS Detector. Microscopy and Microanalysis 27 (5), pp. 1102 - 1112 (2021)

Lee, S.; Chatain, D.; Liebscher, C.; Dehm, G.: Structure and hardness of in situ synthesized nano-oxide strengthened CoCrFeNi high entropy alloy thin films. Scripta Materialia 203, 114044 (2021)

Liu, C.; Li, Z.; Lu, W.; Bao, Y.; Xia, W.; Wu, X.; Zhao, H.; Gault, B.; Liu, C.; Herbig, M. et al.; Fischer, A.; Dehm, G.; Wu, G.; Raabe, D.: Reactive wear protection through strong and deformable oxide nanocomposite surfaces. Nature Communications 12 (1), 5518 (2021)

Han, L.; Rao, Z.; Souza Filho, I. R.; Maccari, F.; Wei, Y.; Wu, G.; Ahmadian, A.; Zhou, X.; Gutfleisch, O.; Ponge, D. et al.; Raabe, D.; Li, Z.: Ultrastrong and Ductile Soft Magnetic High-Entropy Alloys via Coherent Ordered Nanoprecipitates. Advanced Materials 33 (37), 2102139 (2021)

Wolff-Goodrich, S.; Haas, S.; Glatzel, U.; Liebscher, C.: Towards superior high temperature properties in low density ferritic AlCrFeNiTi compositionally complex alloys. Acta Materialia 216, 117113 (2021)

Cautaerts, N.; Rauch, E. F.; Jeong, J.; Dehm, G.; Liebscher, C.: Investigation of the orientation relationship between nano-sized G-phase precipitates and austenite with scanning nano-beam electron diffraction using a pixelated detector. Scripta Materialia 201, 113930 (2021)

Peter, N. J.; Duarte, M. J.; Kirchlechner, C.; Liebscher, C.; Dehm, G.: Faceting diagram for Ag segregation induced nanofaceting at an asymmetric Cu tilt grain boundary. Acta Materialia 214, 116960 (2021)

Zhang, X.; Corrêa da Silva, C.; Zhang, S.; Prabhakar, J. M.; Lu, W.; Vogel, A.; Rohwerder, M.: Investigation of selective oxidation during cooling of hot-rolled iron-manganese-silicon alloys. Corrosion Science 186, 109466 (2021)

Jeong, J.; Jang, W.-S.; Kim, K. H.; Kostka, A.; Gu, G.; Kim, Young, Y.-M.; Oh, S. H.: Crystallographic Orientation Analysis of Nanocrystalline Tungsten Thin Film Using TEM Precession Electron Diffraction and SEM Transmission Kikuchi Diffraction. Microscopy and Microanalysis 27 (2), pp. 237 - 249 (2021)

Kini, M. K.; Lee, S.; Savan, A.; Breitbach, B.; Addab, Y.; Lu, W.; Ghidelli, M.; Ludwig, A.; Bozzolo, N.; Scheu, C. et al.; Chatain, D.; Dehm, G.: Nanocrystalline equiatomic CoCrFeNi alloy thin films: Are they single phase fcc? Surface and Coatings Technology 410, 126945 (2021)

Marshal, A.; Singh, P.; Mušić, D.; Wolff-Goodrich, S.; Evertz, S.; Schökel, A.; Johnson, D. D.; Dehm, G.; Liebscher, C.; Schneider, J. M.: Effect of synthesis temperature on the phase formation of NiTiAlFeCr compositionally complex alloy thin films. Journal of Alloys and Compounds 854, 155178 (2021)

Rao, Z.; Dutta, B.; Körmann, F.; Lu, W.; Zhou, X.; Liu, C.; Kwiatkowski da Silva, A.; Wiedwald, U.; Spasova, M.; Farle, M. et al.; Ponge, D.; Gault, B.; Neugebauer, J.; Raabe, D.; Li, Z.: Beyond Solid Solution High‐Entropy Alloys: Tailoring Magnetic Properties via Spinodal Decomposition. Advanced Functional Materials 31 (7), 2007668 (2021)

Wolff-Goodrich, S.; Marshal, A.; Pradeep, K. G.; Dehm, G.; Schneider, J. M.; Liebscher, C.: Combinatorial exploration of B2/L2₁ precipitation strengthened AlCrFeNiTi compositionally complex alloys. Journal of Alloys and Compounds 853, 156111 (2021)

Gärtner, E.; Jung, H. Y.; Peter, N. J.; Dehm, G.; Jägle, E. A.; Uhlenwinkel, V.; Mädler, L.: Reducing cohesion of metal powders for additive manufacturing by nanoparticle dry-coating. Powder Technology 379, pp. 585 - 595 (2021)

Guo, Y.; He, J.; Lu, W.; Jia, L.; Li, Z.: The evolution of compositional and microstructural heterogeneities in a TaMo_0.5ZrTi_1.5Al_0.1Si_0.2 high entropy alloy. Materials Characterization 172, 110836 (2021)

Lee, D.-H.; Sun, B.; Lee, S.; Ponge, D.; Jägle, E. A.; Raabe, D.: Comparative study of hydrogen embrittlement resistance between additively and conventionally manufactured 304L austenitic stainless steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 803, 140499 (2021)

Zhu, S.; Yan, D.; Gan, K.; Lu, W.; Li, Z.: Awakening the metastability of an interstitial high entropy alloy via severe deformation. Scripta Materialia 191, pp. 96 - 100 (2021)