Publications

Conference Paper (117)

1001.
Conference Paper
Spiegel, M.: Factors affecting the high temperature corrosion resistance of coatings in waste fired plant. In: Corrosion Science in the 21th Century, 1. UMIST, Manchester, UK (2003)
1002.
Conference Paper
Stratmann, M.; Hausbrand, R.; Rohwerder, M.: Novel Zinc Alloy Coatings: Tailored Semiconducting Oxides for Improved Corrosion Protection and Adhesion of Organic Coatings. Japan Society of Corrosion Engineering, pp. 1 - 7 (2003)
1003.
Conference Paper
Tsuri, S.; Hassel, A. W.; Stratmann, M.: Electrochemical Behaviour of Low Alloy Steels during Atmospheric Corrosion. In: Proceed. Asian Pacific Corr. Contr. Conf. 13, pp. A05 1 - A05 8. (2003)
1004.
Conference Paper
Grabke, H. J.; Müller-Lorenz, E. M.: Occurrence and prevention of metal dusting on stainless steels. In: Corrosion/2001, 01373. Corrosion 2001, Houston, Texas, USA, 2001. (2002)
1005.
Conference Paper
Grundmeier, G.; Schinkinger, B.: Spectroscopic and Microscopic Analysis of Thin SiO2 Combustion CVD layers for Surface Engineering of Galvanised Steel. In: 7th International Conference on Adhesion and Surface Analysis, L6, pp. 1 - 4. 7th International Conference on Adhesion and Surface Analysis, Loughborough, UK. (2002)
1006.
Conference Paper
Grundmeier, G.; Schinkinger, B.: Spectroscopic and Microscopic Analysis of Thin SiO2 Combustion CVD layers for Surface Engineering of Galvanised Steel. In: EURADH 2002, pp. 323 - 326. EURADH 2002, Glasgow, UK, September 10, 2002 - September 13, 2002. IOM Communications (2002)
1007.
Conference Paper
Hornung, E.; Rohwerder, M.; Stratmann, M.: Scanning Kelvin Probe Force Microscopy - Chances and Limitations for in Situ Delamination Measurements. PV 2002-13 Corrosion Science: A Retrospective and Current Status, pp. 618 - 623 (2002)
1008.
Conference Paper
Jaehne, E.; Kowalik, T.; Adler, H.-J.; Plagge, A.; Stratmann, M.: Ultra-thin layers of phosphorylated cellulose derivatives on metal surfaces. Macromolecular Symposia 2002, Vol. 177, pp. 97 - 109 (2002)
1009.
Conference Paper
Müller-Lorenz, E. M.; Grabke, H. J.; Zinke, M.: Metal dusting resistance of welded Nickel-based alloys. In: EUROCORR 2001, CD-ROM 1 (Ed. Metallurgia, A. A. I. d.). Congress Proceedings EUROCORR 2001, Riva del Garda, Italy, 2001. AIM, Milano / Italy (2002)
1010.
Conference Paper
Rohwerder, M.; Stratmann, M.: From molecular aspects of delamination to new polymeric coatings. Macromolecular Symposia, 2002. Macromolecular Symposia 187, pp. 35 - 42 (2002)
1011.
Conference Paper
Simoes, A. M.; Bastos, A. C.; Grundmeier, G.: Degradation of strained organic coatings. In: 15th International Corrosion Congress, p. S12-A. (2002)
1012.
Conference Paper
Spiegel, M.; Warnecke, R.; Enders, M.: Korrosion durch Beläge und Salzschmelzen. In: VGB Fachtagung: Thermische Abfallverwertung, Proceedings VGB PowerTech. (2002)
1013.
Conference Paper
Spiegel, M.; Zahs, A.; Grabke, H. J.: The role of alloying elements on the corrosion in oxidizing and chloridizing gases. In: Corrosion 2001, pp. 1 - 10. Corrosion 2001, Houston, Texas, USA, 2001. (2002)
1014.
Conference Paper
Stratmann, M.: The atmospheric corrosion of iron and steel a historic review and future perspectives. In: Corrosion Science: A Retrospective and Current Status in Honor of Robert Frankenthal, Vol. 2002, pp. 89 - 103. Symposium on Corrosion Science - A Retrospective and Current Status in Honor of Robert P Frankenthal, Philadelphia, PA, USA, May 13, 2002 - May 16, 2002. (2002)
1015.
Conference Paper
Stratmann, M.: Advanced electrochemical techniques in corrosion research. 15th International Corrosion Congress: Frontiers in Corrosion Science and Technology, pp. 353 - 354 (2002)
1016.
Conference Paper
Stratmann, M.; Grundmeier, G.: High-tech und Stahl-Neue, Ansätze zur Oberflächenveredelung von Stahl. 17. Aachener Stahlkolloquium Werkstofftechnik: Perspektive mit Stahl, pp. 93 - 100 (2002)
1017.
Conference Paper
Tsuri, S.; Hassel, A. W.; Stratmann, M.: Effect of Sulfate and Chloride Ions on Corrosion Potential and Corrosion Rate Transient during Atmospheric Corrosion of Low Alloy Steels. 15, Technical Research Laboratories, pp. 22 - 29 (2002)
1018.
Conference Paper
Wapner, K.; Stratmann, M.; Grundmeier, G.: The application of the scanning Kelvin probe for investigating the deadhesion of adhesives on iron and zinc. In: EURADH. IOM Communications, pp. 24 - 27. EURADH. IOM Communications, Glasgow, UK. (2002)
1019.
Conference Paper
Hornung, E.; Rohwerder, M.; Stratmann, M.: Scanning KelvinProbe Force Microscopy - Chances and limitations for in situ delamination measurements. In: Corrosion and Corrosion Protection, Vol. 2001, pp. 618 - 622 (Eds. Sinclair, J.; Frankenthal, R.; Kalman, E.; Plieth, W.). Electrochemical Society Inc., Pennington, NJ 08534-2839 USA (2001)
1020.
Conference Paper
Parezanović, I.; Spiegel, M.; Strauch, E.; Grabke, H.-J.: High alloyed stainless steels containing Co, Mn, Mo, Ni, Si as possible cathode current collectors in MCFC. In: Proceedings of International Congress on Advanced Materials, pp. 1 - 8. Materials Week 2001, International Congress on Advanced Materials, München, Germany, October 01, 2001 - October 04, 2001. (2001)
Go to Editor View