Barranco, V.; Carpentier, J.; Grundmeier, G.: Correlation of morphology and barrier properties of thin microwave plasma polymer films on metal substrate. Electrochimica Acta 49 (12), pp. 1999 - 2013 (2004)

Barranco, V.; Thiemann, P.; Yasuda, H. K.; Stratmann, M.; Grundmeier, G.: Spectroscopic and electrochemical characterisation of thin cathodic plasma polymer films on iron. Applied Surface Science 229 (1-4), pp. 87 - 96 (2004)

Li, Y. S.; Spiegel, M.: Internal Oxidation of Fe–Al alloys in KCl-air atmosphere at 650°C. Oxidation of Metals 61 (3-4), pp. 303 - 322 (2004)

Dinh, T. H.; Kuever, J.; Mußmann, M.; Hassel, A. W.; Stratmann, M.; Widdel, F.: Iron corrosion by novel anaerobic microorganisms. Nature; Nature Publishing Group, London 427 (6977), pp. 829 - 832 (2004)

Bengtsson Blücher, D.; Svensson, J.-E.; Johansson, L.-G.; Rohwerder, M.; Stratmann, M.: Scaning Kelvin Probe Force Microscopy: A Useful Tool for Studying Atmospheric Corrosion of MgAl Alloys In Situ. Journal of the Electrochemical Society 151, 12, pp. B621 - B626 (2004)

Blücher, D. B.; Svensson, J. E.; Johansson, L. G.; Rohwerder, M.; Stratmann, M.: Scanning Kelvin probe force microscopy - A useful tool for studying atmospheric corrosion of MgAl alloys in situ. Journal of the Electrochemical Society 151 (12), pp. B621 - B626 (2004)

Bonk, S.; Wicinski, M.; Hassel, A. W.; Stratmann, M.: Electrochemical characterizations of precipitates formed on zinc in alkaline sulphate solution with increasing pH values. Electrochemistry Communicatios 6, 8, pp. 800 - 804 (2004)

Cha, S. C.; Spiegel, M.: Fundamental studies on alkali chloride induced corrosion during combustion of biomass. Materials Science Forum 461–464, p. 1055 - 1055 (2004)

Grabke, H. J.; Spiegel, M.; Zahs, A.: Role of Alloying Elements and Carbides in the Chlorine-induced Corrosion of Steels and Alloys. Materials Research 7 (1), pp. 89 - 95 (2004)

Grundmeier, G.; Thiemann, P.; Carpentier, J.; Shirtcliffe, N.; Stratmann, M.: Tailoring of the morphology and chemical composition of thin organosilane microwave plasma polymer layers on metal substrates. Thin Solid Films 446 (1), pp. 61 - 71 (2004)

Hassel, A. W.: Surface treatment of NiTi for medical applications. Minimally Invasive Therapy & Allied Technologies 13, 4, pp. 240 - 247 (2004)

Li, Y. S.; Spiegel, M.: Models describing the degradation of FeAl and NiAl alloys induced by ZnCl₂/KCl melt at 400-450 °C. Corrosion Science 46, 8 (2004)

Li, Y. S.; Spiegel, M.: High temperature interactions of pure Cr with KCl. Materials Science Forum 461-464, pp. 1047 - 1054 (2004)

Parezanovic, I.; Spiegel, M.: Surface modification of various Fe-Si and Fe-Mn alloys by oxidation/reduction treatments. Surface Engineering 20, 2 (2004)

Parezanovic, I.; Strauch, E.; Spiegel, M.: Development of spinel forming alloys with improved electronic conductivity for MCFC application. Journal of Power Sources 135, pp. 52 - 61 (2004)

Pöter, B.; Stein, F.; Spiegel, M.: Initial stages of Al₂0₃ growth on Fe–Al intermetallic phases. Lithos 73, 1-2, p. S89 - S89 (2004)

Ruh, A.; Spiegel, M.: Kinetic investigations on salt melt induced high temperature corrosion of pure metals. Materials Science Forum 461-464, pp. 61 - 68 (2004)

van der Kloet, J.; Schmidt, W.; Hassel, A. W.; Stratmann, M.: The Role of Chromate in Filiform Corrosion Inhibition. Electrochimica Acta 49 (10), pp. 1675 - 1685 (2004)

Wapner, K.; Grundmeier, G.: Scanning Kelvin Probe measurements of the stability of adhesive/metal interfaces in corrosive environments. Advanced Engineering Materials 6, 3, pp. 163 - 167 (2004)

Zhong, Q. D.; Rohwerder, M.; Zhao, Z.; Jin, Z.: Semiconsucting behavior of temporarily protective oil coating on the surface of AISI 304 satinles steel in 5% Na2SO4 soultion during its degradation. Journal of the Electrochemical Society 151, 7, pp. B446 - B452 (2004)