Publikationen von Gerhard Dehm

Li, J.; Zhou, X.; Breen, A. J.; Peng, Z.; Su, J.; Kürnsteiner, P.; Duarte, M. J.; Duarte Correa, M. J.; Lipińska-Chwałek, M.; Wang, H. et al.; Holec, D.; Mayer, J.; Dehm, G.: Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg–Al–Ca–Mn alloys. Journal of Alloys and Compounds 928, 167177 (2022)

Gopalan, H.; Marshal, A.; Hans, M.; Primetzhofer, D.; Cautaerts, N.; Breitbach, B.; Völker, B.; Kirchlechner, C.; Schneider, J. M.; Dehm, G.: On the interplay between microstructure, residual stress and fracture toughness of (Hf–Nb–Ta–Zr)C multi-metal carbide hard coatings. Materials and Design 224, 111323 (2022)

Li, J.; Zhou, X.; Su, J.; Breitbach, B.; Lipińska-Chwałek, M.; Wang, H.; Dehm, G.: Elucidating dynamic precipitation and yield strength of rolled Mg–Al–Ca–Mn alloy. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 856, 143898 (2022)

Andre, D.; Freund, M.; Rehman, U.; Delis, W.; Felten, M.; Nowak, J.; Tian, C.; Zubair, M.; Tanure, L.; Abdellaoui, L. et al.; Springer, H.; Best, J. P.; Zander, D.; Dehm, G.; Sandlöbes-Haut, S.; Korte-Kerzel, S.: Metallographic preparation methods for the Mg based system Mg–Al–Ca and its Laves phases. Materials Characterization 192, 112187 (2022)

Devulapalli, V.; Hans, M.; Prithiv, T. S.; Schneider, J. M.; Dehm, G.; Liebscher, C.: Microstructure, grain boundary evolution and anisotropic Fe segregation in (0001) textured Ti thin films. Acta Materialia 238, 118180 (2022)

Patil, P.; Lee, S.; Dehm, G.; Brinckmann, S.: Influence of crystal orientation on twinning in austenitic stainless-steel during single micro-asperity tribology and nanoindentation. WEAR 504-505, 204403 (2022)

Dehm, G.; Cairney, J. M.: Implication of grain-boundary structure and chemistry on plasticity and failure. MRS Bulletin 47, S. 800 - 807 (2022)

Schwiedrzik, J. J.; Ramachandramoorthy, R.; Edwards, T. E. J.; Schürch, P.; Casari, D.; Duarte, M. J.; Mohanty, G.; Dehm, G.; Maeder, X.; Philippe, L. et al.; Breguet, J.-M.; Michler, J. K.: Dynamic cryo-mechanical properties of additively manufactured nanocrystalline nickel 3D microarchitectures. Materials and Design 220, 110836 (2022)

Brognara, A.; Best, J. P.; Djemia, P.; Faurie, D.; Dehm, G.; Ghidelli, M.: Effect of composition and nanostructure on the mechanical properties and thermal stability of Zr_100-xCu_x thin film metallic glasses. Materials and Design 219, 110752 (2022)

Cautaerts, N.; Crout, P.; Ånes, H. W.; Prestat, E.; Jeong, J.; Dehm, G.; Liebscher, C.: Free, flexible and fast: Orientation mapping using the multi-core and GPU-accelerated template matching capabilities in the Python-based open source 4D-STEM analysis toolbox Pyxem. Ultramicroscopy 237, 113517 (2022)

Mathews, N. G.; Saxena, A. K.; Venkataramani, N.; Dehm, G.; Jaya, B. N.: Multiscale characterization of damage tolerance in barium titanate thin films. Journal of Applied Physics 132 (4), 045302 (2022)

Nie, Z.-Y.; Sato, Y.; Ogata, S.; Duarte, M. J.; Dehm, G.; Li, J.; Ma, E.; Xie, D.-G.; Shan, Z.-W.: Ultralong one-dimensional plastic zone created in aluminum underneath a nanoscale indent. Acta Materialia 232, 117944 (2022)

Bishara, H.; Kontis, P.; Dehm, G.; Schneider, J. M.; Evertz, S.: Effect of hybridization in PdAlY-(Ni/Au/Ir) metallic glasses thin films on electrical resistivity. Scripta Materialia 214, 114681 (2022)

Hosseinabadi, R.; Riesch-Oppermann, H.; Best, J. P.; Dehm, G.; Kirchlechner, C.: Size scaling in bi-crystalline Cu micropillars containing a coherent twin boundary. Acta Materialia 230, 117841 (2022)

Bishara, H.; Tsybenko, H.; Nandy, S.; Muhammad, Q. K.; Frömling, T.; Fang, X.; Best, J. P.; Dehm, G.: Dislocation-enhanced electrical conductivity in rutile TiO₂ accessed by room-temperature nanoindentation. Scripta Materialia 212, 114543 (2022)

Mishra, A. K.; Gopalan, H.; Hans, M.; Kirchlechner, C.; Schneider, J. M.; Dehm, G.; Jaya, B. N.: Strategies for damage tolerance enhancement in metal/ceramic thin films: Lessons learned from Ti/TiN. Acta Materialia 228, 117777 (2022)

Tsybenko, H.; Tian, C.; Rau, J.; Breitbach, B.; Schreiber, P.; Greiner, C.; Dehm, G.; Brinckmann, S.: Deformation and phase transformation in polycrystalline cementite (Fe₃C) during single- and multi-pass sliding wear. Acta Materialia 227, 117694 (2022)

Chakraborty, J.; Oellers, T.; Raghavan, R.; Ludwig, A.; Dehm, G.: Microstructure and residual stress evolution in nanocrystalline Cu–Zr thin films. Journal of Alloys and Compounds 896, 162799 (2022)

Šestan, A.; Sreekala, L.; Markelj, S.; Kelemen, M.; Zavašnik, J.; Liebscher, C.; Dehm, G.; Hickel, T.; Čeh, M. S.; Novak, S. et al.; Jenuš, P.: Non-uniform He bubble formation in W/W₂C composite: Experimental and ab-initio study. Acta Materialia 226, 117608 (2022)

Cao, T.; Guo, W.; Lu, W.; Xue, Y.; Lu, W.; Su, J.; Liebscher, C.; Li, C.; Dehm, G.: Strain rate dependent deformation behavior of BCC-structured Ti₂₉Zr₂₄Nb₂₃Hf₂₄ high entropy alloy at elevated temperatures. Journal of Alloys and Compounds 891, 161859 (2022)