Publikationen von Christian Liebscher

Chang, Y.; Zhang, S.; Liebscher, C.; Dye, D.; Ponge, D.; Scheu, C.; Dehm, G.; Raabe, D.; Gault, B.; Lu, W.: Could face-centered cubic titanium in cold-rolled commercially-pure titanium only be a Ti-hydride? Scripta Materialia 178, S. 39 - 43 (2020)

Wu, X.; Kumar Makineni, S.; Liebscher, C.; Dehm, G.; Rezaei Mianroodi, J.; Shanthraj, P.; Svendsen, B.; Bürger, D.; Eggeler, G.; Raabe, D. et al.; Gault, B.: Publisher Correction: Unveiling the Re effect in Ni-based single crystal superalloys. Nature Communications 11 (1), 1076 (2020)

Guo, W.; Su, J.; Lu, W.; Liebscher, C.; Kirchlechner, C.; Ikeda, Y.; Körmann, F.; Liu, X.; Xue, Y.; Dehm, G.: Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy. Acta Materialia 185, S. 45 - 54 (2020)

Lu, W.; Liebscher, C.; Yan, F.; Fang, X.; Li, L.; Li, J.; Guo, W.; Dehm, G.; Raabe, D.; Li, Z.: Interfacial nanophases stabilize nanotwins in high-entropy alloys. Acta Materialia 185, S. 218 - 232 (2020)

Wu, X.; Makineni, S. K.; Liebscher, C.; Dehm, G.; Mianroodi, J. R.; Shanthraj, P.; Svendsen, B.; Bürger, D.; Eggeler, G. F.; Raabe, D. et al.; Gault, B.: Unveiling the Re effect in Ni-based single crystal superalloys. Nature Communications 11, 389 (2020)

Šlapáková, M.; Zendegani, A.; Liebscher, C.; Hickel, T.; Neugebauer, J.; Hammerschmidt, T.; Ormeci, A.; Grin, J.; Dehm, G.; Kumar, K. S. et al.; Stein, F.: Atomic scale configuration of planar defects in the Nb-rich C14 Laves phase NbFe₂. Acta Materialia 183, S. 362 - 376 (2020)

Cao, T.; Guo, W.; Lu, W.; Xue, Y.; Lu, W.; Su, J.; Liebscher, C.; Liu, C.; Dehm, G.: Strain-Rate-Dependent Deformation Behavior of Ti₂₉Zr₂₄Nb₂₃Hf₂₄ High Entropy Alloys at Elevated and Room Temperature. Condensed Matter: Materials Science, S. 1 - 31 (2020)

Lee, S.; Duarte, M. J.; Feuerbacher, M.; Soler, R.; Kirchlechner, C.; Liebscher, C.; Oh, S. H.; Dehm, G.: Dislocation plasticity in FeCoCrMnNi high-entropy alloy: quantitative insights from in situ transmission electron microscopy deformation. Materials Research Letters 8 (6), S. 216 - 224 (2020)

Chen, H.; Kauffmann, A.; Seils, S.; Boll, T.; Liebscher, C.; Harding, I.; Kumar, K. S.; Szabó, D. V.; Schlabach, S.; Kauffmann-Weiss, S. et al.; Müller, F. E. H.; Gorr, B.; Christ, H.-J.; Heilmaier, M.: Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta–Nb–Mo–Cr–Ti–Al. Acta Materialia 176, S. 123 - 133 (2019)

Peter, N. J.; Gerlitzky, C.; Altin, A.; Wohletz, S.; Krieger, W.; Tran, T. H.; Liebscher, C.; Scheu, C.; Dehm, G.; Groche, P. et al.; Erbe, A.: Atomic level bonding mechanism in steel/aluminium joints produced by cold pressure welding. Materials 7, 100396 (2019)

Garzón-Manjón, A.; Christiansen, L.; Kirchlechner, C.; Breitbach, B.; Liebscher, C.; Springer, H.; Dehm, G.: Synthesis, microstructure, and hardness of rapidly solidified Cu–Cr alloys. Journal of Alloys and Compounds 794, S. 203 - 209 (2019)

Berkels, B.; Liebscher, C.: Joint non-rigid image registration and reconstruction for quantitative atomic resolution scanning transmission electron microscopy. Ultramicroscopy 198, S. 49 - 57 (2019)

Chang, Y.; Lu, W.; Guénolé, J.; Stephenson, L.; Szczepaniak, A.; Kontis, P.; Ackerman, A.; Dear, F. F.; Mouton, I.; Zhong, X. et al.; Zhang, S.; Dye, D.; Liebscher, C.; Ponge, D.; Korte-Kerzel, S.; Raabe, D.; Gault, B.: Ti and its alloys as examples of cryogenic focused ion beam milling of environmentally-sensitive materials. Nature Communications 10, 942 (2019)

Peter, N. J.; Frolov, T.; Duarte, M. J.; Hadian, R.; Ophus, C.; Kirchlechner, C.; Liebscher, C.; Dehm, G.: Segregation-Induced Nanofaceting Transition at an Asymmetric Tilt Grain Boundary in Copper. Physical Review Letters 121 (25), 255502 (2018)

Lu, W.; Liebscher, C.; Dehm, G.; Raabe, D.; Li, Z.: Bidirectional Transformation Enables Hierarchical Nanolaminate Dual‐Phase High‐Entropy Alloys. Advanced Materials 30 (44), 1804727 (2018)

Breen, A. J.; Mouton, I.; Lu, W.; Wang, S.; Szczepaniak, A.; Kontis, P.; Stephenson, L.; Chang, Y.; Kwiatkowski da Silva, A.; Liebscher, C. et al.; Raabe, D.; Britton, T. B.; Herbig, M.; Gault, B.: Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4. Scripta Materialia 156, S. 42 - 46 (2018)

Lu, W.; Herbig, M.; Liebscher, C.; Morsdorf, L.; Marceau, R. K. W.; Dehm, G.; Raabe, D.: Formation of eta carbide in ferrous martensite by room temperature aging. Acta Materialia 158, S. 297 - 312 (2018)

Meiners, T.; Peng, Z.; Gault, B.; Liebscher, C.; Dehm, G.: Sulfur – induced embrittlement in high-purity, polycrystalline copper. Acta Materialia 156, S. 64 - 75 (2018)

Németh, A. A. N.; Crudden, D. J.; Collins, D. M.; Kuksenko, V.; Liebscher, C.; Armstrong, D. E. J.; Wilkinson, A. J.; Reed, R. C.: On the Influence of Nb/Ti Ratio on Environmentally-Assisted Crack Growth in High-Strength Nickel-Based Superalloys. Metallurgical and Materials Transactions A, Topical Collection: Superalloys and Their Applications 49 (9), S. 3923 - 3937 (2018)

Liebscher, C.; Stoffers, A.; Alam, M.; Lymperakis, L.; Cojocaru-Mirédin, O.; Gault, B.; Neugebauer, J.; Dehm, G.; Scheu, C.; Raabe, D.: Strain-Induced Asymmetric Line Segregation at Faceted Si Grain Boundaries. Physical Review Letters 121 (015702), 015702, S. 1 - 5 (2018)