Publikationen von Binhan Sun

Zheng, X.; Sun, B.; Zhao, H.; Barbosa de Mélo, E.; Liu, Y.; Kim, S.; Yue, S.: Unveiling high-temperature flow behavior in a high-Mg Al alloy: The role of Mg segregation and grain boundary sliding. Journal of Materials Science & Technology 243, S. 167 - 180 (2026)

Syed, F. W.; Saikia, U.; Sun, B.; Kiranbabu, S.; Tehranchi, A.; Hickel, T.; Zaefferer, S.; Ponge, D.: Interfacial segregation of carbon atoms: the competition between grain boundaries and phase boundaries. Scripta Materialia 268, 116842 (2025)

Dong, X.; Wei, S.; Tehranchi, A.; Saksena, A.; Ponge, D.; Sun, B.; Raabe, D.: The dual role of boron on hydrogen embrittlement: example of interface-related hydrogen effects in an austenite-ferrite two-phase lightweight steel. Acta Materialia 299, 121458 (2025)

Shi, H.; Hachet, G.; Cheng, H.; Prithiv, T. S.; Ponge, D.; Sun, B.: Improving hydrogen embrittlement resistance of martensitic steel via interface B segregation. International Journal of Hydrogen Energy 164, 150954 (2025)

Lei, S.; Sun, B.; Xuan, Y.; Tian, R.; Ma, Y.; Elkot, M.; Cheng, H.; Yao, N.; Lu, T.; Tan, J. et al.; Zhang, Z.; Zhang, X.; Tu, S.-T.: On the anisotropic deformation behavior of a low-density medium manganese steel. Acta Materialia 292, 121060 (2025)

Rao, J.; Sun, B.; Ganapathi, A.; Dong, X.; Hohenwarter, A.; Wu, C.-H.; Rohwerder, M.; Dehm, G.; Duarte, M. J.: Microstructural features and hydrogen diffusion in bcc FeCr alloys: A comparison between the Kelvin probe- and nanohardness based-methods. International Journal of Hydrogen Energy 102, S. 1103 - 1115 (2025)

Dong, X.; Saksena, A.; Tehranchi, A.; Gault, B.; Ponge, D.; Sun, B.; Raabe, D.: Interfacial boron segregation in a high-Mn and high-Al multiphase lightweight steel. Acta Materialia 283, 120568 (2025)

Hachet, G.; Tehranchi, A.; Shi, H.; Prabhakar, J. M.; Wei, S.; Angenendt, K.; Zaefferer, S.; Gault, B.; Sun, B.; Ponge, D. et al.; Raabe, D.: Segregation at prior austenite grain boundaries: The competition between boron and hydrogen. International Journal of Hydrogen Energy 95, S. 734 - 746 (2024)

Ding, R.; Yao, Y.; Sun, B.; Guo, H.; Zhang, J.; Shao, Y.; Zhang, C.; Liu, W.; Godfrey, A.; Yang, Z. et al.; Huang, X.; Liu, Y.; van der Zwaag, S.; Chen, H.: Strong yet ductile steels via a heterogeneous phase transformation strategy. Scripta Materialia 252, 116274 (2024)

Sun, B.; Zhao, H.; Dong, X.; Teng, C.; Zhang, A.; Kong, S.; Zhou, J.; Zhang, X.; Tu, S.-T.: Current challenges in the utilization of hydrogen energy-a focused review on the issue of hydrogen-induced damage and embrittlement. Advances in Applied Energy 14, 100168 (2024)

Zhang, J.; Pang, X.; Li, Y.; Wei, S.; Yang, C.; Pan, S.; Sun, B.; Zhou, D.; Huang, X.; Zhang, D. et al.; Qin, G.: Tuning generalized planar fault energies to enable deformation twinning in nanocrystalline aluminum alloys. International Journal of Plasticity 178, 104018 (2024)

Zhang, X.; Yang, C.; Meng, L.; Chen, Z.; Gong, W.; Sun, B.; Zhao, S.; Zhang, D.; Li, Y.; Zhou, D.: The influence of precipitation on plastic deformation in a high Mg-containing AlMgZn-based crossover alloy: Slip localization and strain hardening. International Journal of Plasticity 173, 103896 (2024)

Sun, Z.; Sun, B.; Soh, V.; Lee, C.; Lau, D.; Wei, F.; Kwiatkowski da Silva, A.; Lin, M.; Tan, C.; Wang, P. et al.; Ramamurty, U.: Laser powder bed fusion of crack-susceptible stainless maraging steel undergoing solid-state phase transformations. Acta Materialia 263, 119534 (2024)

Saksena, A.; Sun, B.; Dong, X.; Khanchandani, H.; Ponge, D.; Gault, B.: Optimizing site-specific specimen preparation for atom probe tomography by using hydrogen for visualizing radiation-induced damage. International Journal of Hydrogen Energy 50 (Part A), S. 165 - 174 (2024)

Elkot, M.; Sun, B.; Zhou, X.; Ponge, D.; Raabe, D.: On the formation and growth of grain boundary k-carbides in austenitic high-Mn lightweight steels. Materials Research Letters 12 (1), S. 10 - 16 (2024)

Shi, H.; Nandy, S.; Cheng, H.; Sun, B.; Ponge, D.: In-situ investigation of the interaction between hydrogen and stacking faults in a bulk austenitic steel. Acta Materialia 262, 119441 (2024)

Sun, B.; Kwiatkowski da Silva, A.; Wu, Y.; Ma, Y.; Chen, H.; Scott, C.; Ponge, D.; Raabe, D.: Physical metallurgy of medium-Mn advanced high-strength steels. International Materials Reviews 68 (7), S. 786 - 824 (2023)

Sun, B.; Dong, X.; Wen, J.; Zhang, X.; Tu, S.-T.: Microstructure design strategies to mitigate hydrogen embrittlement in metallic materials. Fatigue & Fracture of Engineering Materials & Structures 46 (8), S. 3060 - 3076 (2023)

Zhang, J.; Zhou, D.; Pang, X.; Zhang, B.; Li, Y.; Sun, B.; Valiev, R. Z.; Zhang, D.: Deformation-induced concurrent formation of 9R phase and twins in a nanograined aluminum alloy. Acta Materialia 244, 118540 (2023)

Elkot, M.; Sun, B.; Zhou, X.; Ponge, D.; Raabe, D.: Hydrogen-assisted decohesion associated with nanosized grain boundary κ-carbides in a high-Mn lightweight steel. Acta Materialia 241, 118392 (2022)