Suchergebnisse

Duarte, M. J.; Fang, X.; Rao, J.; Krieger, W.; Brinckmann, S.; Dehm, G.: In situ nanoindentation during electrochemical hydrogen charging: a comparison between front-side and a novel back-side charging approach. Journal of Materials Science 56 (14), S. 8732 - 8744 (2021)

Kini, M. K.; Lee, S.; Savan, A.; Breitbach, B.; Addab, Y.; Lu, W.; Ghidelli, M.; Ludwig, A.; Bozzolo, N.; Scheu, C. et al.; Chatain, D.; Dehm, G.: Nanocrystalline equiatomic CoCrFeNi alloy thin films: Are they single phase fcc? Surface and Coatings Technology 410, 126945 (2021)

Tian, C.; Dehm, G.; Kirchlechner, C.: Influence of strain rate on the activation of {110}, {112}, {123} slip in ferrite of DP800. Materialia 15, 100983 (2021)

Marshal, A.; Singh, P.; Mušić, D.; Wolff-Goodrich, S.; Evertz, S.; Schökel, A.; Johnson, D. D.; Dehm, G.; Liebscher, C.; Schneider, J. M.: Effect of synthesis temperature on the phase formation of NiTiAlFeCr compositionally complex alloy thin films. Journal of Alloys and Compounds 854, 155178 (2021)

Wolff-Goodrich, S.; Marshal, A.; Pradeep, K. G.; Dehm, G.; Schneider, J. M.; Liebscher, C.: Combinatorial exploration of B2/L2₁ precipitation strengthened AlCrFeNiTi compositionally complex alloys. Journal of Alloys and Compounds 853, 156111 (2021)

Gärtner, E.; Jung, H. Y.; Peter, N. J.; Dehm, G.; Jägle, E. A.; Uhlenwinkel, V.; Mädler, L.: Reducing cohesion of metal powders for additive manufacturing by nanoparticle dry-coating. Powder Technology 379, S. 585 - 595 (2021)

Ahmadian, A.; Schreiber, D.; Zhou, X.; Gault, B.; Liebscher, C.; Romaner, L.; Dehm, G.: Aluminum depletion induced by complex co-segregation of carbon and boron in a ∑ 5 [310] bcc-iron grain boundary. arXiv (e-prints), S. 1 - 26 (2021)

Addab, Y.; Kini, M. K.; Courtois, B.; Savan, A.; Ludwig, A.; Bozzolo, N.; Scheu, C.; Dehm, G.; Chatain, D.: Microstructure evolution and thermal stability of equiatomic CoCrFeNi films on (0001) α-Al₂O₃. Acta Materialia 200, S. 908 - 921 (2020)

Tsybenko, H.; Xia, W.; Dehm, G.; Brinckmann, S.: On the commensuration of plastic plowing at the microscale. Tribology International 151, 106477 (2020)

Jung, H. Y.; Peter, N. J.; Gärtner, E.; Dehm, G.; Uhlenwinkel, V.; Jägle, E. A.: Bulk nanostructured AlCoCrFeMnNi chemically complex alloy synthesized by laser-powder bed fusion. Additive Manufacturing 35, 101337 (2020)

Kini, M. K.; Merola, C.; Breitbach, B.; Klapproth, D.; Philippi, B.; Molin, J.-B.; Kirchlechner, C.; Dehm, G.: Dislocation plasticity and detwinning under thermal stresses in nanotwinned Ag thin films. Acta Materialia 198, S. 61 - 71 (2020)

Laursen, C. M.; Peter, N. J.; Gerstein, G.; Maier, H. J.; Dehm, G.; Frick, C. P.: Influence of Ti₃Ni₄ precipitates on the indentation-induced two-way shape-memory effect in Nickel-Titanium. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 792, 139373 (2020)

Xia, W.; Dehm, G.; Brinckmann, S.: Investigation of single asperity wear at the microscale in an austenitic steel. WEAR 452–453, 203289 (2020)

Bishara, H.; Ghidelli, M.; Dehm, G.: Approaches to Measure the Resistivity of Grain Boundaries in Metals with High Sensitivity and Spatial Resolution: A Case Study Employing Cu. ACS Applied Electronic Materials 2 (7), S. 2049 - 2056 (2020)

Kumar Saxena, A.; Brinckmann, S.; Völker, B.; Dehm, G.; Kirchlechner, C.: Experimental conditions affecting the measured fracture toughness at the microscale: Notch geometry and crack extension measurement. Materials and Design 191, 108582 (2020)

Mathews, N. G.; Kumar Saxena, A.; Kirchlechner, C.; Dehm, G.; Jaya, B. N.: Effect of size and domain orientation on strength of Barium Titanate. Scripta Materialia 182, S. 68 - 73 (2020)

Völker, B.; Du, C.; Fager, H.; Rueß, H.; Soler, R.; Kirchlechner, C.; Dehm, G.; Schneider, J. M.: How tensile tests allow a screening of the fracture toughness of hard coatings. Surface and Coatings Technology 390, 125645 (2020)

Meiners, T.; Duarte, M. J.; Richter, G.; Dehm, G.; Liebscher, C.: Tantalum and Zirconium induced structural transitions at complex [111] tilt grain boundaries in Copper. Acta Materialia 190, S. 93 - 104 (2020)

Evertz, S.; Schnabel, V.; Köhler, M.; Kirchlechner, I.; Kontis, P.; Chen, Y.-T.; Soler, R.; Jaya, B. N.; Kirchlechner, C.; Mušić, D. et al.; Gault, B.; Gault, B.; Schneider, J. M.; Raabe, D.; Dehm, G.: Review on Quantum Mechanically Guided Design of Ultra-Strong Metallic Glasses. Frontiers in Materials 7 (89), S. 1 - 12 (2020)

Peter, N. J.; Duarte, M. J.; Liebscher, C.; Srivastava, V. C.; Uhlenwinkel, V.; Jägle, E. A.; Dehm, G.: Early stage phase separation of AlCoCr_0.75Cu_0.5FeNi high-entropy powder at the nanoscale. Journal of Alloys and Compounds 820, 153149 (2020)