Publikationen von Dirk Ponge

Wang, Z.; Lu, W.; Zhao, H.; He, J.; Wang, K.; Zhou, B.; Ponge, D.; Raabe, D.; Li, Z.: Formation mechanism of κ-carbides and deformation behavior in Si-alloyed FeMnAlC lightweight steels. Acta Materialia 198, S. 258 - 270 (2020)

Kini, A.; Maischner, D.; Weisheit, A.; Ponge, D.; Gault, B.; Jägle, E. A.; Raabe, D.: In-situ synthesis via laser metal deposition of a lean Cu–3.4Cr–0.6Nb (at%) conductive alloy hardened by Cr nano-scale precipitates and by Laves phase micro-particles. Acta Materialia 197, S. 330 - 340 (2020)

Souza Filho, I. R.; Dutta, A.; Almeida Junior, D. R.; Lu, W.; Sandim, M. J. R.; Ponge, D.; Sandim, H. R. Z.; Raabe, D.: The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α’ transformation to twinning. Acta Materialia 197, S. 123 - 136 (2020)

Raabe, D.; Sun, B.; Kwiatkowski da Silva, A.; Gault, B.; Yen, H.-W.; Sedighiani, K.; Prithiv, T. S.; Souza Filho, I. R.; Katnagallu, S.; Jägle, E. A. et al.; Kürnsteiner, P.; Kusampudi, N.; Stephenson, L.; Herbig, M.; Liebscher, C.; Springer, H.; Zaefferer, S.; Shah, V.; Wong, S. L.; Baron, C.; Diehl, M.; Roters, F.; Ponge, D.: Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels. Metallurgical and Materials Transactions A 51, S. 5517 - 5586 (2020)

Sohn, S. S.; Kim, D. G.; So, Y. H.; Kwiatkowski da Silva, A.; Lu, W.; Breen, A. J.; Gault, B.; Ponge, D.: High-rate superplasticity in an equiatomic medium-entropy VCoNi alloy enabled through dynamic recrystallization of a duplex microstructure of ordered phases. Acta Materialia 194, S. 106 - 117 (2020)

Guitar, M. A.; Scheid, A.; Nayak, U. P.; Nakamura, L.; Ponge, D.; Britz, D.; Mücklich, F. T.: Quantification of the Phase Transformation Kinetics in High Chromium Cast Irons Using Dilatometry and Metallographic Techniques. Metallurgical and Materials Transactions A 51, S. 3789 - 3801 (2020)

Zhao, H.; Chen, Y.; Gault, B.; Makineni, S. K.; Ponge, D.; Raabe, D.: (Al, Zn)₃Zr dispersoids assisted η′ precipitation in an Al–Zn–Mg–Cu–Zr alloy. Materialia 10, 100641 (2020)

Ding, R.; Yao, Y.; Sun, B.; Liu, G.; He, J.; Li, T.; Wan, X.; Dai, Z.; Ponge, D.; Raabe, D. et al.; Zhang, C.; Godfrey, A.; Miyamoto, G.; Furuhara, T.; Yang, Z.; van der Zwaag, S.; Chen, H.: Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels. Science Advances 6 (13), eaay1430 (2020)

Chang, Y.; Zhang, S.; Liebscher, C.; Dye, D.; Ponge, D.; Scheu, C.; Dehm, G.; Raabe, D.; Gault, B.; Lu, W.: Could face-centered cubic titanium in cold-rolled commercially-pure titanium only be a Ti-hydride? Scripta Materialia 178, S. 39 - 43 (2020)

Zhao, H.; Huber, L.; Lu, W.; Peter, N. J.; An, D.; De Geuser, F.; Dehm, G.; Ponge, D.; Neugebauer, J.; Gault, B. et al.; Raabe, D.: Interplay of Chemistry and Faceting at Grain Boundaries in a Model Al Alloy. Physical Review Letters 124 (10), 106102 (2020)

Tan, X.-D.; Ponge, D.; Lu, W.; Xu, Y.-B.; He, H.; Yan, J.; Wu, D.; Raabe, D.: Joint investigation of strain partitioning and chemical partitioning in ferrite-containing TRIP-assisted steels. Acta Materialia 186, S. 374 - 388 (2020)

Vakili, S. M.; Zarei-Hanzaki, A.; Anoushe, A.S.; Abedi, H. R.; Mohammad-Ebrahimi, M. H.; Jaskari, M.; Sohn, S. S.; Ponge, D.; Karjalainen, L. P.: Reversible dislocation movement, martensitic transformation and nano-twinning during elastic cyclic loading of a metastable high entropy alloy. Acta Materialia 185, S. 474 - 492 (2020)

Sun, B.; Krieger, W.; Rohwerder, M.; Ponge, D.; Raabe, D.: Dependence of hydrogen embrittlement mechanisms on microstructure-driven hydrogen distribution in medium Mn steels. Acta Materialia 183, S. 313 - 328 (2020)

Tian, C.; Ponge, D.; Christiansen, L.; Kirchlechner, C.: On the mechanical heterogeneity in dual phase steel grades: Activation of slip systems and deformation of martensite in DP800. Acta Materialia 183, S. 274 - 284 (2020)

Rao, Z.; Dutta, B.; Körmann, F.; Ponge, D.; Li, L.; He, J.; Stephenson, L.; Schäfer, L.; Skokov, K.; Gutfleisch, O. et al.; Raabe, D.; Li, Z.: Unveiling the mechanism of abnormal magnetic behavior of FeNiCoMnCu high-entropy alloys through a joint experimental - theoretical study. Physical Review Materials 4, 014402 (2020)

Sun, B.; Ma, Y.; Vanderesse, N.; Srinivas Varanasi, R.; Song, W.; Bocher, P.; Ponge, D.; Raabe, D.: Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: Role of the austenite-ferrite interface. Acta Materialia 178, S. 10 - 25 (2019)

Benzing, J. T.; Liu, Y.; Zhang, X.; Luecke, W. E.; Ponge, D.; Dutta, A.; Oskay, C.; Raabe, D.; Wittig, J. E.: Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents. Acta Materialia 177, S. 250 - 265 (2019)

Rao, Z.; Ponge, D.; Körmann, F.; Ikeda, Y.; Schneeweiss, O.; Friák, M.; Neugebauer, J.; Raabe, D.; Li, Z.: Invar effects in FeNiCo medium entropy alloys: From an Invar treasure map to alloy design. Intermetallics 111, 106520 (2019)

Chang, Y.; Mouton, I.; Stephenson, L.; Ashton, M. W.; Zhang, G. K.; Szczepaniak, A.; Lu, W.; Ponge, D.; Raabe, D.; Gault, B.: Quantification of solute deuterium in titanium deuteride by atom probe tomography with both laser pulsing and high-voltage pulsing: influence of the surface electric field. New Journal of Physics 21, 053025 (2019)

Souza Filho, I. R.; Sandim, M. J. R.; Ponge, D.; Sandim, H. R. Z.; Raabe, D.: Strain hardening mechanisms during cold rolling of a high-Mn steel: Interplay between submicron defects and microtexture. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 754, S. 636 - 649 (2019)