Publikationen von James P. Best

Brognara, A.; Best, J. P.; Djemia, P.; Faurie, D.; Dehm, G.; Ghidelli, M.: Effect of composition and nanolayering on mechanical properties of Zr_100-xCu_x thin film metallic glasses. Talk at Université catholique de Louvain (UCL), Louvain-la-Neuve, Belgium (2022)

Hosseinabadi, R.; Riesch-Oppermann, H.; Best, J. P.; Dehm, G.; Kirchlechner, C.: Size-dependent coherent twin boundary strength contribution in Cu micropillars. Nanomechanical Testing in Materials Research and Development VIII, Split, Croatia (2022)

Hosseinabadi, R.; Riesch-Oppermann, H.; Best, J. P.; Dehm, G.; Kirchlechner, C.: Size effect in bi-crystalline Cu micropillars with a coherent twin boundary. ECI conference 2022, Nanomechanical Testing in Materials Research and Development VIII, Split, Croatia (2022)

Jentner, R.; Best, J. P.; Kirchlechner, C.; Dehm, G.: Challenges in the phase identification of steels using unsupervised clustering of nanoindentation data. Nanomechanical Testing in Materials Research and Development VIII, Split, Croatia (2022)

Evertz, S.; Nicolin, N.; Primetzhofer, D.; Best, J. P.; Dehm, G.: Electrical resistivity of magnetron-sputtered Fe_1−xO thin films. DPG-Tagung der Sektion Kondensierte Materie, University of Regensburg, Regensburg, Germany (2022)

Best, J. P.: Site-specific micromechanics of impurity-containing grain boundaries supported by correlative atom probe tomography. Materials Science Engineering - MSE 2022, Darmstadt, Germany (2022)

Rielli, V. V.; Theska, .; Yao, Y.; Best, J. P.; Primig, S.: On the composition and nanomechanical response of δ-Phase and γ′′-free zone in Alloy 718. EuroSuperalloys 2022, Bamberg, Germany (2022)

Best, J. P.: The role of nanoscale structural ordering on the damage tolerance of laser-processed bulk metallic glasses. Materials Science Engineering MSE 2022, Darmstadt, Germany (2022)

Best, J. P.; Tian, C.; Ma, Y.; Dehm, G.; Rasiński, M.: Reduced toughness of recrystallised tungsten at grain boundaries evidenced through site-specific microcantilever fracture testing. 11th European Solid Mechanics Conference - ESMC 2022, Galway, Ireland (2022)

Brognara, A.; Best, J. P.; Djemia, P.; Faurie, D.; Dehm, G.; Ghidelli, M.: Effect of composition and nanolayering on mechanical properties of Zr_100-xCu_x thin film metallic glasses. 11th European Solid Mechanics Conference - ESMC 2022, Galway, Ireland (2022)

Bhat, M. K.; Frommeyer, L.; Prithiv, T. S.; Dehm, G.; Best, J. P.: Segregation-induced microscale strengthening of an asymmetric Σ5 grain boundary in Cu doped with Ag. Nanobrücken 2022, Prague, Czech Republic (2022)

Paul, M. J.; Liu, Q.; Best, J. P.; Li, X.; Kruzic, J. J.; Ramamurty, U.; Gludovatz, B.: Resistance curve behavior of AlSi10Mg fabricated by laser powder bed fusion. Combined Australian Materials Societies – CAMS2022, Melbourne, Australia (2022)

Best, J. P.: Chemical segregation to grain boundaries: Probing the micromechanical response with site-specific in situ SEM measurements. 1st Materials Science Colloquium, 66. Metallkunde-Kolloquium of the Montanuniversität Leoben, Lech am Arlberg, Austria (2022)

Best, J. P.: Recent progress in micromechanical testing of grain boundaries. Seminar at Laboratoire des Sciences des Procédés et des Matériaux (LSPM), Paris Nord University, Paris, France (2022)

Hosseinabadi, R.; Best, J. P.; Kirchlechner, C.; Dehm, G.: Impact of an incoherent twin boundary on the mechanical response of Cu bi-crystalline micropillars. 11th European Solid Mechanics Conference - ESMC 2022, Galway, Ireland (2022)

Brognara, A.; Best, J. P.; Djemia, P.; Faurie, D.; Dehm, G.; Ghidelli, M.: Toward engineered thin film metallic glasses with large mechanical properties: effect of composition and nanostructure. Seminar at Laboratoire des Sciences des Procédés et des Matériaux (LSPM), Paris Nord University, Paris, France (2021)

Hosseinabadi, R.; Riesch-Oppermann, H.; Best, J. P.; Dehm, G.; Kirchlechner, C.: Size effect in bi-crystalline Cu micropillars with a coherent twin boundary. Euromat 2021, Virtual Conference (2021)

Liu, C.; Lu, W.; Xia, W.; Du, C.; Rao, Z.; Best, J. P.; Brinckmann, S.; Lu, J.; Gault, B.; Dehm, G. et al.; Li, Z.; Wu, G.; Raabe, D.: Ultrastrong and ductile complex concentrated alloy via interstitial solid solutioning. Euromat 2021, Virtual Conference, Graz, Austria (2021)

Best, J. P.: Environmental testing with a focus on high-temperature micromechanics. Summerschool on Experimental Nano- and Micromechanics, Karlsruhe, Germany (2021)

Best, J. P.: Connecting structure to the micro-mechanics and macro-scale fracture toughness of a laser-processed BMG using micro-focussed high-energy X-rays at PETRA III. PETRA IV Workshop – Earth, Environment, and Materials for Nanoscience and Information Technology, online, Hamburg, Germany (angenommen)