Publikationen von Sandra Korte-Kerzel

Andre, D.; Freund, M.; Rehman, U.; Delis, W.; Felten, M.; Nowak, J.; Tian, C.; Zubair, M.; Tanure, L.; Abdellaoui, L. et al.; Springer, H.; Best, J. P.; Zander, D.; Dehm, G.; Sandlöbes-Haut, S.; Korte-Kerzel, S.: Metallographic preparation methods for the Mg based system Mg–Al–Ca and its Laves phases. Materials Characterization 192, 112187 (2022)

Korte-Kerzel, S.; Hickel, T.; Huber, L.; Raabe, D.; Sandlöbes, S.; Todorova, M.; Neugebauer, J.: Defect phases–thermodynamics and impact on material properties. International Materials Reviews 66 (2021)

Kusche, C.; Dunlap, A.; Pütz, F.; Tian, C.; Kirchlechner, C.; Aretz, A.; Schwedt, A.; Al-Samman, T.; Münstermann, S.; Korte-Kerzel, S.: Efficient characterization tools for deformation-induced damage at different scales. Production Engineering 14, S. 95 - 104 (2020)

Li, J.; Lu, W.; Gibson, J. S.K.L.; Zhang, S.; Korte-Kerzel, S.; Raabe, D.: Compatible deformation and extra strengthening by heterogeneous nanolayer composites. Scripta Materialia 179, S. 30 - 35 (2020)

Guénolé, J.; Mouhib, F.-Z.; Huber, L.; Grabowski, B.; Korte-Kerzel, S.: Basal slip in laves phases: The synchroshear dislocation. Scripta Materialia 166, S. 134 - 138 (2019)

Sandlöbes, S.; Korte-Kerzel, S.; Raabe, D.: On the influence of the heat treatment on microstructure formation and mechanical properties of near-alpha Ti–Fe alloys. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 748, S. 301 - 312 (2019)

Chang, Y.; Lu, W.; Guénolé, J.; Stephenson, L.; Szczepaniak, A.; Kontis, P.; Ackerman, A.; Dear, F. F.; Mouton, I.; Zhong, X. et al.; Zhang, S.; Dye, D.; Liebscher, C.; Ponge, D.; Korte-Kerzel, S.; Raabe, D.; Gault, B.: Ti and its alloys as examples of cryogenic focused ion beam milling of environmentally-sensitive materials. Nature Communications 10, 942 (2019)

Choi, W. S.; Sandlöbes, S.; Malyar, N.; Kirchlechner, C.; Korte-Kerzel, S.; Dehm, G.; Choi, P.-P.; Raabe, D.: On the nature of twin boundary-associated strengthening in Fe–Mn–C steel. Scripta Materialia 156, S. 27 - 31 (2018)

Li, J.; Lu, W.; Gibson, J. S.K.L.; Zhang, S.; Chen, T.; Korte-Kerzel, S.; Raabe, D.: Eliminating deformation incompatibility in composites by gradient nanolayer architectures. Scientific Reports 8 (1), 16216 (2018)

Chen, R.; Sandlöbes, S.; Zehnder, C.; Zeng, X.; Korte-Kerzel, S.; Raabe, D.: Deformation mechanisms, activated slip systems and critical resolved shear stresses in an Mg-LPSO alloy studied by micro-pillar compression. Materials and Design 154, S. 203 - 216 (2018)

Guillon, O.; Elsässer, C.; Gutfleisch, O.; Janek, J.; Korte-Kerzel, S.; Raabe, D.; Volkert, C.: Manipulation of matter by electric and magnetic fields: Toward novel synthesis and processing routes of inorganic materials. Materials Today 21 (5), S. 527 - 536 (2018)

Sandlöbes, S.; Friák, M.; Korte-Kerzel, S.; Pei, Z.; Neugebauer, J.; Raabe, D.: A rare-earth free magnesium alloy with improved intrinsic ductility. Scientific Reports 7, 10458 (2017)

Choi, W. S.; Sandlöbes, S.; Malyar, N.; Kirchlechner, C.; Korte-Kerzel, S.; Dehm, G.; De Cooman, B. C.; Raabe, D.: Dislocation interaction and twinning-induced plasticity in face-centered cubic Fe–Mn–C micro-pillars. Acta Materialia 132, S. 162 - 173 (2017)

Chen, R.; Sandlöbes, S.; Zeng, X.; Li, D.; Korte-Kerzel, S.; Raabe, D.: Room temperature deformation of LPSO structures by non-basal slip. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 682, S. 354 - 358 (2017)

Guo, W.; Jägle, E. A.; Yao, J.; Maier, V.; Korte-Kerzel, S.; Schneider, J. M.; Raabe, D.: Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates. Acta Materialia 80, S. 94 - 106 (2014)

Diehl, M.; Kusampudi, N.; Kusche, C.; Raabe, D.; Korte-Kerzel, S.: Combining Experiments, Simulations, and Data Science to Understand Damage in Dual Phase Steels. International Conference on Plasticity, Damage, and Fracture, Riviera May, Mexico (2020)

Choi, W. S.; Sandlöbes, S.; Malyar, N.; Kirchlechner, C.; Korte-Kerzel, S.; Dehm, G.; De Cooman, B. C.; Raabe, D.: Dislocation interaction and twinning-induced plasticity in face-centered cubic Fe–Mn–C micro-pillars. MRS Fall Meeting , Boston, MA, USA (2017)

Choi, W. S.; Sandlöbes, S.; Malyar, N.; Kirchlechner, C.; Korte-Kerzel, S.; Dehm, G.; De Cooman, B. C.; Raabe, D.: Dislocation interaction and twinning-induced plasticity in face-centered cubic Fe–Mn–C micro-pillars. MECANO General Meeting, Toulouse, France (2017)

Choi, W. S.; Sandlöbes, S.; Malyar, N.; Kirchlechner, C.; Korte-Kerzel, S.; Dehm, G.; De Cooman, B. C.; Raabe, D.: Size and orientation effects on the elasto-plastic transition and deformation mechanism of twinning-induced plasticity steel micro-pillars. MSE 2016 Conference , Darmstadt, Germany (2016)

Choi, W. S.; Sandlöbes, S.; Malyar, N.; Kirchlechner, C.; Korte-Kerzel, S.; Dehm, G.; De Cooman, B. C.; Raabe, D.: The effect of size-independent strength on the size effect in micro-compression tests. MRS Fall Meeting, Boston, MA, USA (2017)