Suchergebnisse

Zhao, H.; Gault, B.; Ponge, D.; Raabe, D.: Reversion and re-aging of a peak aged Al–Zn–Mg–Cu alloy. Scripta Materialia 188, S. 269 - 273 (2020)

Sohn, S. S.; Kim, D. G.; So, Y. H.; Kwiatkowski da Silva, A.; Lu, W.; Breen, A. J.; Gault, B.; Ponge, D.: High-rate superplasticity in an equiatomic medium-entropy VCoNi alloy enabled through dynamic recrystallization of a duplex microstructure of ordered phases. Acta Materialia 194, S. 106 - 117 (2020)

Zhao, H.; Chen, Y.; Gault, B.; Makineni, S. K.; Ponge, D.; Raabe, D.: (Al, Zn)₃Zr dispersoids assisted η′ precipitation in an Al–Zn–Mg–Cu–Zr alloy. Materialia 10, 100641 (2020)

Ding, R.; Yao, Y.; Sun, B.; Liu, G.; He, J.; Li, T.; Wan, X.; Dai, Z.; Ponge, D.; Raabe, D. et al.; Zhang, C.; Godfrey, A.; Miyamoto, G.; Furuhara, T.; Yang, Z.; van der Zwaag, S.; Chen, H.: Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels. Science Advances 6 (13), eaay1430 (2020)

Chang, Y.; Zhang, S.; Liebscher, C.; Dye, D.; Ponge, D.; Scheu, C.; Dehm, G.; Raabe, D.; Gault, B.; Lu, W.: Could face-centered cubic titanium in cold-rolled commercially-pure titanium only be a Ti-hydride? Scripta Materialia 178, S. 39 - 43 (2020)

Zhao, H.; Huber, L.; Lu, W.; Peter, N. J.; An, D.; De Geuser, F.; Dehm, G.; Ponge, D.; Neugebauer, J.; Gault, B. et al.; Raabe, D.: Interplay of Chemistry and Faceting at Grain Boundaries in a Model Al Alloy. Physical Review Letters 124, 106102 (2020)

Sun, B.; Krieger, W.; Rohwerder, M.; Ponge, D.; Raabe, D.: Dependence of hydrogen embrittlement mechanisms on microstructure-driven hydrogen distribution in medium Mn steels. Acta Materialia 183, S. 313 - 328 (2020)

Rao, Z.; Dutta, B.; Körmann, F.; Ponge, D.; Li, L.; He, J.; Stephenson, L.; Schäfer, L.; Skokov, K.; Gutfleisch, O. et al.; Raabe, D.; Li, Z.: Unveiling the mechanism of abnormal magnetic behavior of FeNiCoMnCu high-entropy alloys through a joint experimental - theoretical study. Physical Review Materials 4, 014402 (2020)

Raabe, D.; Sun, B.; Kwiatkowski da Silva, A.; Gault, B.; Yen, H.-W.; Sedighiani, K.; Thoudden Sukumar, P.; Souza Filho, I. R.; Katnagallu, S.; Jägle, E. A. et al.; Kürnsteiner, P.; Kusampudi, N.; Stephenson, L.; Herbig, M.; Liebscher, C.; Springer, H.; Zaefferer, S.; Shah, V.; Wong, S. L.; Baron, C.; Diehl, M.; Roters, F.; Ponge, D.: Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels. Metallurgical and Materials Transactions A 50th Anniversary Collection, S. 1 - 70 (2020)

Sun, B.; Ma, Y.; Vanderesse, N.; Varanasi, R. S.; Song, W.; Bocher , P.; Ponge, D.; Raabe, D.: Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: Role of the austenite-ferrite interface. Acta Materialia 178, S. 10 - 25 (2019)

Benzing, J. T.; Liu, Y.; Zhang, X.; Luecke, W. E.; Ponge, D.; Dutta, A.; Oskay, C.; Raabe, D.; Wittig, J. E.: Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents. Acta Materialia 177, S. 250 - 265 (2019)

Rao, Z.; Ponge, D.; Körmann, F.; Ikeda, Y.; Schneeweiss, O.; Friák, M.; Neugebauer, J.; Raabe, D.; Li, Z.: Invar effects in FeNiCo medium entropy alloys: From an Invar treasure map to alloy design. Intermetallics 111, 106520 (2019)

Chang, Y.; Mouton, I.; Stephenson, L.; Ashton, M. W.; Zhang, G. K.; Szczepaniak, A.; Lu, W.; Ponge, D.; Raabe, D.; Gault, B.: Quantification of solute deuterium in titanium deuteride by atom probe tomography with both laser pulsing and high-voltage pulsing: influence of the surface electric field. New Journal of Physics 21, 053025 (2019)

Souza Filho, I. R.; Sandim, M. J. R.; Ponge, D.; Sandim, H. R. Z.; Raabe, D.: Strain hardening mechanisms during cold rolling of a high-Mn steel: Interplay between submicron defects and microtexture. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 754, S. 636 - 649 (2019)

Kwiatkowski da Silva, A.; Kamachali, R. D.; Ponge, D.; Gault, B.; Neugebauer, J.; Raabe, D.: Thermodynamics of grain boundary segregation, interfacial spinodal and their relevance for nucleation during solid-solid phase transitions. Acta Materialia 168, S. 109 - 120 (2019)

Raabe, D.; Li, Z.; Ponge, D.: Metastability alloy design. MRS Bulletin 44 (4), S. 266 - 272 (2019)

Yan, F.; Mouton, I.; Stephenson, L.; Breen, A. J.; Chang, Y.; Ponge, D.; Raabe, D.; Gault, B.: Atomic-scale investigation of hydrogen distribution in a Ti–Mo alloy. Scripta Materialia 162, S. 321 - 325 (2019)

Sun, B.; Ding, R.; Brodusch, N.; Chen, H.; Guo, B.; Fazeli, F.; Ponge, D.; Gauvin, R.; Yue, S.: Improving the ductility of ultrahigh-strength medium Mn steels via introducing pre-existed austenite acting as a “reservoir” for Mn atoms. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 749, S. 235 - 240 (2019)

Benzing, J. T.; Kwiatkowski da Silva, A.; Morsdorf, L.; Bentley, J.; Ponge, D.; Dutta, A.; Han, J.; McBride, J. R.; Van Leer, B.; Gault, B. et al.; Raabe, D.; Wittig, J. E.: Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel. Acta Materialia 166, S. 512 - 530 (2019)

Souza Filho, I. R.; Kwiatkowski da Silva, A.; Sandim, M. J. R.; Ponge, D.; Gault, B.; Sandim, H. R. Z.; Raabe, D.: Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation. Acta Materialia 166, S. 178 - 191 (2019)